Intex CS7110 Bedienungsanleitung
188
PO
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English
OWNER’S MANUAL
Krystal Clear
Saltwater System®
Model CS7110
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
Don’t forget to try these other fine Intex products: Pools, Pool
Accessories, Inflatable Pools and In-Home Toys, Airbeds and
Boats available at fine retailers or visit our website listed below.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance,
which may result in updates to the instruction manual without
notice.
For illustrative purposes only.
IMPORTANT!
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, Visit
www.intexcorp.com
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
1-800-234-6839
Monday through Friday, 8:30am to 5:00pm Pacific Time 188-*PO-R0-1406
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 2
Warnings............................................................................... 3
Parts References.................................................................. 4-5
Product Information & Specifications................................ 6
Setup Instructions................................................................ 7-11
Salt & Pool Water Volumes...................................................12
Intex Pools Salt Table........................................................... 13
Intex Pools Cyanuric Acid Table..........................................14
Intex Pools Operating Time Table........................................15
Non-Intex Pools Salt Table................................................... 16
Non-Intex Pools Cyanuric Acid Table................................. 16
Non-Intex Pools Operating Time Table................................16
Operating Instructions......................................................... 17-18
LED Code Chart.................................................................... 19
Maintenance.......................................................................... 20-22
Long Term Storage............................................................... 22
Pool Maintenance and Chemical Definitions..................... 23
Troubleshooting Guide........................................................ 24-25
General Aquatic Safety........................................................ 26
Limited Warranty................................................................... 27
TABLE OF CONTENTS
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 3
WARNING
•To reduce the risk of injury, do not permit children to use this product. Always supervise
children and those with disabilities.
•Children must stay away from this product and all electrical cords.
•Assembly and disassembly by adults only.
•Risk of electric shock. Connect only to a grounding type receptacle, this product is provided
with a ground-fault circuit interrupter. If replacement of the plug or cord is needed, use only
identical replacement parts.
•Always unplug this product from the electrical outlet before removing, cleaning, servicing or
making any adjustment to the product.
• Theunitisprovidedwithaground-faultcircuitinterrupter(GFCI).TotesttheGFCI,pushthe
test button. TheGFCIshouldinterruptpower.Push the reset button, power should be restored.
IftheGFCIfailstooperateinthismanner.TheGFCIisdefective.IftheGFCIinterruptspower
to the pump without the test button being pushed, a ground current is flowing, indicating the
possibility of an electric shock. Do not use this pump. Disconnect the pump and have the
problem corrected by a qualified service representative before using.
•Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers,
hedge trimmers and other equipment.
•To reduce the risk of electric shock, the supply cord cannot be replaced. If the cord is
damaged, the appliance should be replaced immediately.
•To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or
converter plugs to connect unit to electric supply; provide a properly located outlet.
•Do not attempt to plug in or unplug this product while standing in water or when your hands are
wet.
• Donotuseanapplianceleakagecurrentinterrupter(ALCI)inplaceofaGFCIsincetheALCI
will not protect people.
• Positionthisproductawayfromthepool,soastopreventchildrenfromclimbingonitand
accessing the pool.
•Do not operate this product when the pool is occupied.
• Thisproductisintendedtobeusedonlyforthepurposesdescribedinthemanual!
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY
DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS
INJURY OR DEATH.
IMPORTANT SAFETY RULES
Read,UnderstandandFollowAllInstructionsCarefullyBeforeInstallingandUsingthisProduct.
READ AND FOLLOW ALL INSTRUCTIONS
For portable Above-Ground-Pools only
This product is for use with storable pools only. Do not use with permanently-installed pools. A
storable pool is constructed so that it is capable of being readily disassembled for storage and
reassembled to its original integrity. A permanently-installed pool is constructed in or on the ground
or in a building such that it cannot be readily disassembled for storage.
These product warnings, instructions and safety rules provided with the product represent some common
risks of water recreation devices and do not cover all instances of risk and danger. Please use common
sense and good judgement when enjoying any water activity.
CAUTION
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 4
PARTS REFERENCE
Beforeassemblingyourproduct,pleasetakeafewminutestocheckthecontents
and become familiar with all the parts.
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforClassBdigitaldevice,
pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
1
13
6
11
7
4
5
9
8
10
2
12 3
16
18
17
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 5
When ordering parts, be sure to quote the model number and part numbers.
REF. NO.
DESCRIPTION QTY.
SPARE
PART
NO.
COMMON
PARTS
PARTS FOR
CONNECTION
TO FILTER
PUMPS WITH
1-1/4” (32MM)
HOSE SIZE
1
ADAPTORAWITHTHREADEDCOLLAR(OPTIONAL)
1 10849
2 O-RINGA 1 10712
3SCREW 2 11519
4 ELECTROLYTIC CELL(O-RINGCINCLUDED) 1 11577
5 COPPER ELECTRODE 1 11579
6TITANIUM ELECTRODE 1 11581
7 FLOWSENSOR 1 11460
8
CONNECTORHOSEWITHTHREADEDFITTINGS
1 10720
9 THREADEDADAPTORB(OPTIONAL) 1 10722
10 CELL COVER 2 11131
11 ELECTROLYTIC CELL NUT 1 11582
12 L-SHAPEO-RING 1 11228
13 COPPER ELECTRODE NUT 1 11580
14 CHLORINE TEST STRIPS 1 19635
15 COPPER TEST STRIPS 1 11254
16 TITANIUMELECTRODEO-RING 1 11585
17 COPPERELECTRODEO-RING 1 11586
18 CONTROL STATION 111589EG
PARTS REFERENCE (continued)
Beforeassemblingyourproduct,pleasetakeafewminutestocheckthecontents
and become familiar with all the parts.
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 6
This product is specially designed for above ground pools. It will destroy the bacteria,
oxidize bather organics and control algae, which provide a safe, clean and comfortable
swimming pool.
Commonsalt(sodiumchloride)ismadeupoftwoelements,sodiumandchloride.Duringthe
installation of your Saltwater System, a measured quantity of salt is dissolved in the pool water
to make it slightly salty. The pool water flows through the Saltwater System ’s electrolytic cell
to produce chlorine. The chlorine dissolves in the water and instantly starts destroying bacteria
and algae. It also oxidizes all other organic materials.
Low voltage direct current is applied to the copper electrode, and copper ions are generated
and dissolved instantly in the water. Copper is an effective algaecide, which will prevent
algae from growing in the pool.
HOW THE CHLORINE IS GENERATED
Power: 110 - 120 Volt AC
Amperage: 0.6A
Wattage: 65W
IdealSaltLevel: 3000ppm(partspermillion)
Maximum Chlorine Output/hour: 5 grams/hour
Copper Ionizer Output Current: 175 mA
MinimumFlowRate:
700~4000gallons/hour(2650-15140liters/hour)
Limited Warranty: see “Limited Warranty”
HOW COPPER IONS ARE GENERATED
PRODUCT SPECIFICATIONS
Copper electrodes
Hose from
Filter Pump
Flow Sensor
Electronic
Control Station Power Supply
Electrolytic Cell
Power Switch
Hose Returning
Water to Pool
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 7
SETUP INSTRUCTIONS
1. Assembletheabove-ground-pool(AGP)anditsfilterpumpaccordingtotheirinstallation
instructions.
2. Take the Saltwater System and its accessories out of the packaging.
3. Place the Saltwater System in line after the filter pump.
4. Connect the connector hose (8) to the Saltwater System inlet.
Connecting the system to pump and pool with 1-1/4” (32mm) connections/hoses:
The saltwater system features 1-1/2” (38mm) connections. It is accordingly supplied with
adaptors A (1) and B (9) for connecting to the small 1-1/4” (32mm) diameter connections/
hoses. Install as follows:
Drawing #1
IMPORTANT
• TheSaltwaterSystemrequiresaseparatefilterpump[700~4000gph(2650~15140
lph)] to drive the water and function properly.
• TheSaltwaterSystemmustbeinstalledasthelastpieceofpoolequipmentinthe
water return line to the pool as displayed in Drawing #1. This location extends the
life of the titanium plates.
WATER TO
POOL
WATERFROM
POOL
FILTER
PUMP
SWIMMINGPOOL
ID1-1/4”(32mm)
HOSE
ID 1-1/4”
(32mm)HOSE
19
9
8
SALTWATER
SYSTEM
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 8
SETUP INSTRUCTIONS (continued)
1. Godirectlytostep2ifyourpoolisempty.Ifyourabove-ground-poolisfilledwithwater,
unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs
into the connectors, before installing the saltwater pool system.
2. Connect the adaptor A (1) to the electrolytic cell (4) outlet as shown in Drawing #1. Tighten
securely.
3. Disconnect the water return hose from the filter pump connection and connect it to the
adaptor A (1)ontheSaltwaterSystemwithahoseclamp.(seeDrawing#1)
4. ConnectadaptorB(9) to the connector hose (8).Tightensecurely.(seeDrawing#1)
5. ConnectadaptorB(9) tofilterpumpoutlet(lowerconnection).Tightensecurely.
6. Remove the black hat-like plugs that prevent water from flowing out of the pool. Now,
return the strainer grids to the strainer connectors.
8
9
1
4
8
9
Filter
Pump
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 9
SETUP INSTRUCTIONS (continued)
Connecting the system to pump and pool with 1-1/2” (38mm) connections/hoses:
Pump and pool with 1-1/2” (38mm) connections do not require the adaptors A (1) or B (9).
Install as follows:
Drawing #2
1. Godirectlytostep2ifyourpoolisempty.Ifyourabove-ground-poolisfilledwithwater,
close the plunger valves before installing the Saltwater System.
2. Disconnect the water return hose from the filter pump connection and connect it to the
Saltwater System outlet.
3. Connect the connector hose (8) to the filter pump outlet connection.
4. Open the plunger valves to allow the water to flow.
FILTER
PUMP
ID1-1/2”(38mm)
HOSE
ID1-1/2”(38mm)
HOSE
SALTWATER
SYSTEM
SWIMMINGPOOL
WATER TO
POOL
PLUNGER
VALVE
WATERFROM
POOL
8
Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English 188
PO
SAVE THESE INSTRUCTIONS
English
Page 10
SETUP INSTRUCTIONS (continued)
Connecting the system to other types of pump (with different type of thread or no
thread):
The Saltwater System can also be adapted to other filter pumps with different thread or those
without a thread on the connection.
Connection to 1-1/4” (32mm) hose:
1. ConnectoneendofadaptorB(9) to the connector hose (8). Tighten securely.
2. Now,connecttheotherendofadaptorB(9) to the filter pump outlet. Tighten securely.
Connection to 1-1/2” (38mm) hose with clamp:
1. Connect the connector hose (8) to the filter pump outlet connection with a large hose
clamp. Tighten securely.
ID1-1/4”(32mm)
CONNECTION
SALTWATER SYSTEM
FILTERPUMP
89
LARGEHOSE
CLAMP
FILTERPUMP
ID1-1/2”(38mm)
CONNECTION
SALTWATER SYSTEM
8
Andere Handbücher für CS7110
1
Inhaltsverzeichnis
Andere Intex Wassersystem Handbücher
Beliebte Wassersystem Handbücher anderer Marken
Spirotech
Spirotech SPIROVENT SUPERIOR S250 Bedienungsanleitung
Culligan
Culligan Aqua-Cleer Aqua-Cleer Advanced Drinking Water... Bedienungsanleitung
A.O. Smith
A.O. Smith Dura-Max AJH - 1000A - P Bedienungsanleitung
Microline
Microline T.F.C.-4 Handbuch
Eureka Forbes
Eureka Forbes Aquaguard Select Bedienungsanleitung
Cetetherm
Cetetherm AquaEfficiency Bedienungsanleitung
