Invacare Growth Bracket Bedienungsanleitung

SAFETY SUMMARY

WARNING

DO NOT install this equipment without first read-

ingandunderstandingthisinstructionsheet.Ifyou

areunabletounderstandthese instructions,con-

tact a healthcare professional, dealer or techni-

cal personnel if applicable before attempting

toinstallthisequipment-otherwise,injuryordam-

age may occur.

Ensure that the seat is fixed to the wheelchair. A

loose seat may lead to potentially dangerous

situationswithpositioningdevices.

FIGURE 1 - ATTACHING/ADJUSTING THE

FIXED GROWTH BRACKET

Top Set

Bottom Set

Growth Bracket

Adjustment

holes

Ulti-Mate

Base

Six (6) T-nutted

mounting holes

Center Panel

Curved

Back

Mounting

Screws

ATTACHING/ADJUSTING THE

FIXED GROWTH BRACKET

Attaching the Growth Bracket

NOTE: The growth bracket attaches to the Child/Junior

Size Curved Back only.

1. Remove the growth bracket and attaching hardware

from packaging.

2. Unzip center panel of the back cover, exposing the

six (6) T-nutted mounting holes.

NOTE: Make sure the growth bracket is positioned cor-

rectly. The flat portion of the growth bracket provides

depth adjustment for the Ulti-Mate Base. The angled

portion of the growth bracket provides height adjustment

for the Curved Back. See FIGURE 1.

3. Install four (4) of the mounting screws through the

holes in the growth bracket and into the back shell.

Securely tighten.

NOTE: On the curved back, the standard attachment

points are the top and bottom sets of holes. Refer to the

FIGURE 2-ATTACHMENT POINTS in this instruction

sheet for optional attachment points.

4. Install four (4) of the mounting screws through the

holes in the growth bracket and into the underside of

the Ulti-Mate Base. Securely tighten.

NOTE: On the Ulti-Mate Base, the standard attachment

points are the front and back sets of holes. Refer to the

FIGURE 2-ATTACHMENT POINTS in this instruction

sheet for optional attachment points.

5. If adjustment is required, refer to ADJUSTING THE

GROWTH BRACKET in this instruction sheet.

Adjusting the Growth Bracket

(FIGURE 1)

ADJUSTING THE BACK HEIGHT.

1. If necessary, unzip center panel of the back cover.

2. Remove the four (4) mounting screws that secure

the growth bracket to the back.

3. Adjust the back up or down until the desired mount-

ing position is obtained.

4. Reinstall the four (4) mounting screws through the

growth bracket and into the back shell. Securely

tighten. Refer to the FIGURE 2- ATTACHMENT

POINTS

in this instruction sheet for standard and

optional attachment points.

5. Zip center panel of back cover closed.

ADJUSTING THE ULTI-MATE BASE

DEPTH.

1. Remove the four (4) mounting screws that secure

the growth bracket to the Ulti-Mate Base.

2. Adjust the seat forward or back until the desired

mounting position is obtained.

3. Reinstall the four (4) mounting screws through the

growth bracket and into the seat. Securely tighten.

Refer to the FIGURE 2 -ATTACHMENT POINTS In

this instruction sheet for standard and optional at-

tachment points.

Growth Bracket

Assembly, Installation and Operating Instructions

CURVED BACK

FIGURE 2 - ATTACHMENT POINTS

ULTI-MATE BASE

Standard

Rear of Base

Front of Base

Rear of Base

Option 1 Option 2

Rear of Base

Front of Base Front of Base

Bottom of Back Bottom of Back

Option 1 Option 2

Bottom of Back

Top of Back Top of Back

Standard

Top of Back ATTACHING / ADJUSTING THE

ADJUSTABLE ANGLE GROWTH

BRACKET (FIGURE 3)

Attaching the Adjustable Angle Growth

Bracket

NOTE: The growth bracket attaches to the child/junior

sized curved back ONLY.

1. Remove the adjustable angle growth bracket and

attaching hardware from the packaging.

2. Unzip the center panel of the back cover, exposing

the six (6) T-nutted mounting holes.

NOTE: Make sure that the growth bracket is positioned

correctly. The flat portion of the adjustable angle bracket

growth bracket provides depth adjustment for the Ulti-

mate base. The angled portion of the adjustable angle

bracket height adjustment for the curved back

(FIGURE 2).

3. Install four (4) of the mounting screws through the

slots in the adjustable angle growth bracket and into

the underside of the Ulti-mate base. Securely tighten.

NOTE: On the Ulti-mate base, the standard attachment

points are the front and rear four (4) holes. Refer to the

FIGURE 2 - ATTACHMENT POINTS

in this instruction

sheet for optional attachment points.

4. Install two (2) of the mounting screws through the

slots on the adjustable angle growth bracket and

into the back shell. Securely tighten.

NOTE: On the curved back, the standard attachment

points are the MIDDLE set of holes. Refer to the

FIGURE 2 - ATTACHMENT POINTS

in this instruction

sheet for optional attachment points.

5. If adjustment is required, refer to ADJUSTING

THE GROWTH BRACKET in this instruction

sheet.

Adjusting the Growth Bracket

ADJUSTING THE BACK HEIGHT.

1. If necessary, unzip center panel of the back

cover.

2. Loosen the two (2) mounting screws that se-

cure the growth bracket to the back.

3. Adjust the back up or down until the desired

mounting position is obtained.

4. Securely tighten the two (2) mounting screws.

ADJUSTING THE ANGLE OF THE BACK

(FIGURE 4).

NOTE: The adjustable angle growth bracket is infinitely

angle adjustable. The back-to-seat angle is set by the

location of the mounting points for the back in relation to

the base and by changing the hole positions of the ad-

justable angle back hooks.

1. Remove the two (2) attaching screws and nuts on

the adjustable angle back hooks.

2. Recline the back to the desired angle.

3. Align one (1) round hole and one (1) slotted hole on

the back L-bracket with two (2) of the holes on the

hook portion.

4. Reinstall the two (2) screws and nuts and securely

tighten.

5. If more adjustment is needed, the adjustment screws

can be completely removed, and the bracket set to

a NEW T-nutted hole location. Refer to the

FIGURE2-ATTACHMENTPOINTS

in this instruc-

tion sheet for optional attachment points.

6. Zip center panel of back cover closed.

ADJUSTING THE ULTI-MATE BASE

DEPTH.

1. If necessary, unzip center panel of the back cover.

2. Loosen the four (4) mounting screws that secure

the growth bracket to the Ulti-Mate Base.

3. Adjust the seat forward or back until the desired

mounting position is obtained.

4. Securely tighten the two (2) mounting screws.

5. If more adjustment is needed, the adjustment screws

can be completely removed, and the bracket set to

a NEW T-nutted hole location. Refer to the

FIGURE2-ATTACHMENTPOINTS

in this instruc-

tion sheet for optional attachment points.

6. Zip center panel of back cover closed.

FIGURE 3 - ATTACHING / ADJUSTING THE

ADJUSTABLE ANGLE GROWTH

BRACKET

FIGURE 4 - ADJUSTING THE ANGLE OF

THE BACK

Bottom Mounting

Screws

Top Mounting

Screws

Attaching Screws

Nuts

L-Bracket

Hook Portion

LIMITED WARRANTY

PLEASENOTE:THEWARRANTYBELOWHASBEENDRAFTED TO COMPLYWITHFEDERALLAW APPLICABLETO

PRODUCTSMANUFACTUREDAFTERJULY4,1975.

This warranty is extended only to the original purchaser/user of our products.

This warranty gives you specific legal rights and you may also have other legal rights which vary from

statetostate.

Invacare warrants its product to be free from defects in materials and workmanship for the

period of two (2) years of use by original purchaser. If within such warranty period any such

product shall be proven to be defective, such product shall be repaired or replaced, at Invacare's

option. This warranty does not include any labor or shipping charges incurred in replacement part

installation or repair of any such product. Invacare's sole obligation and your exclusive remedy under

thiswarranty shall be limitedto such repairand/or replacement.

For warranty service, please contact the dealer from whom you purchased your Invacare

product. In the event you do not receive satisfactory warranty service, please write directly to

Invacare at the address on the next page. Provide dealer's name, address, model number, date of

purchase, indicate nature of the defect and, if the product is serialized, indicate the serial number.

Invacare Corporation will issue a return authorization. The defective unit or parts must be returned for

warranty inspection using the serial number, when applicable, as identification within thirty (30) days of

return authorization date. DO NOT return products to our factory without our prior consent. C.O.D.

shipments will be refused; please prepay shipping charges.

LIMITATIONSANDEXCLUSIONS:THEWARRANTYSHALLNOTAPPLYTOPROBLEMSARISINGFROMNORMAL

WEARORFAILURETOADHERETOTHEENCLOSEDINSTRUCTIONS.INADDITION,THEFOREGOINGWARRANTY

SHALLNOTAPPLYTOSERIALNUMBEREDPRODUCTSIFTHESERIALNUMBERHASBEENREMOVEDORDEFACED;

PRODUCTS SUBJECTEDTONEGLIGENCE,ACCIDENT,IMPROPEROPERATION,MAINTENANCEORSTORAGE;

ORPRODUCTSMODIFIEDWITHOUTINVACARE'SEXPRESSWRITTENCONSENTINCLUDING,BUTNOTLIMITED

TO:MODIFICATIONTHROUGHTHEUSEOFUNAUTHORIZEDPARTSORATTACHMENTS:PRODUCTSDAMAGED

BYREASONOFREPAIRSMADETOANYCOMPONENTWITHOUTTHESPECIFICCONSENTOFINVACARE;PROD-

UCTSDAMAGEDBYCIRCUMSTANCESBEYONDINVACARE'SCONTROL;PRODUCTSREPAIREDBYANYONE

OTHER THAN ANAUTHORIZED INVACARE DEALER, SUCH EVALUATION SHALL BE SOLELY DETERMINED BY

INVACARE.

THEFOREGOINGWARRANTYISEXCLUSIVEANDINLIEUOFALLOTHEREXPRESSWARRANTIES,IFANY,INCLUD-

ING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

IT SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESSED WARRANTY PROVIDED HEREIN AND THE

REMEDYFORVIOLATIONSOFANYIMPLIEDWARRANTYSHALLBELIMITED TO REPAIR OR REPLACEMENT OF

THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN. INVACARE SHALL NOT BE LIABLE

FORANYCONSEQUENTIALORINCIDENTALDAMAGESWHATSOEVER.

THISWARRANTYSHALLBEEXTENDEDTOCOMPLYWITHSTATE/PROVINCIALLAWSANDREQUIREMENTS.

Invacare Corporation www.invacare.com

USA Canada

One Invacare Way 5970 Chedworth Way Invacare and "Yes, you can" are trademarks of Invacare

lyria, Ohio USA Mississauga, Ontario Corporation.

800-333-6900 905-890-8838 Form No. 96-324 Part No. 1068857 Rev A (1) 7/00

Inhaltsverzeichnis

Andere Invacare Mobilitätshilfe Handbücher

Invacare

Invacare Neck Support Handbuch

Invacare

Invacare Rollites 65100 Bedienungsanleitung

Invacare

Invacare Fixed Released Rail/Cane Clamps Bedienungsanleitung

Invacare

Invacare Lynx L-3 Bedienungsanleitung

Invacare

Invacare Court-Side Glides 6281JR Montageanleitung

Invacare

Invacare Dolomite Alpha Series Bedienungsanleitung

Invacare

Invacare Tracer SX5 Recliner Gebrauchsanweisung

Invacare

Invacare Lima H263 Bedienungsanleitung

Invacare

Invacare 1085144 Bedienungsanleitung

Invacare

Invacare 1305L Montageanleitung

Invacare

Invacare Adjustable Back Upholstery Handbuch

Invacare

Invacare 65109 Montageanleitung

Invacare

Invacare Aquatec Trans Bedienungsanleitung

Invacare

Invacare Thumb Saver 1109379 Bedienungsanleitung

Invacare

Invacare Top End Transformer Bedienungsanleitung

Invacare

Invacare 65510 Montageanleitung

Invacare

Invacare OrbIt Bedienungsanleitung

Invacare

Invacare Esprit Action Bedienungsanleitung

Invacare

Invacare P402 Aventia Bedienungsanleitung

Invacare

Invacare 1048085 Montageanleitung

Invacare

Invacare Dolomite Maxi+ Series Bedienungsanleitung

Invacare

Invacare Aquatec Marine Bedienungsanleitung

Invacare

Invacare Quick Release Caster Bedienungsanleitung

Invacare

Invacare Adult Lap Belt Bedienungsanleitung

Beliebte Mobilitätshilfe Handbücher anderer Marken

Alber

Alber Scalamobil iQ Bedienungsanleitung

Ferno

Ferno CCT-PX Bedienungsanleitung

HEPRO

HEPRO Gripo Bedienungsanleitung

Otto Bock

Otto Bock Pheon 3R62 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M11090 Bedienungsanleitung

Medline

Medline MDS86835DSHEC Installationsanleitung

Guldmann

Guldmann Twin Turner II Bedienungsanleitung

Drive

Drive ROOMBA Bedienungsanleitung

Gate

Gate Balder Bedienungsanleitung

Decon wheel

Decon wheel TNS Notos Bedienungsanleitung

ExoAtlet

ExoAtlet ExoAtlet-II Bedienungsanleitung

Rhythm Healthcare

Rhythm Healthcare B3800F Bedienungsanleitung

AMF-BRUNS

AMF-BRUNS PROTEKTOR Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Bedienungsanleitung

Rhythm Healthcare

Rhythm Healthcare C500U Bedienungsanleitung

Lumex

Lumex RJ4200A Bedienungsanleitung

Rebotec

Rebotec Jumbo Bedienungsanleitung

Rehaforum MEDICAL

Rehaforum MEDICAL PR50548 Bedienungsanleitung