IOGear MiniView GCS1772 Bedienungsanleitung

MiniView™

2/4-Port Multi-Function USB 2.0 KVM Switch

User Manual (GCS1772 / GCS1774)

Thank you for purchasing one of the most feature-rich KVM with USB peripheral sharing, audio, and built-in

Ethernet switch. You can save money and space by eliminating the need for multiple monitors, keyboards, mice,

and USB peripheral devices such as printers, scanners, and more. Up to 127 USB devices can be daisy

chained from this KVMP switch. Sharing speakers and a microphone also offers extra value and convenience

for the users. To top it off, the built-in Ethernet switch allows you to easily network and share Internet with your

computers.

USB and KVM technology together makes cross-platform management easy. A single USB console can control

a PC and a MAC workstation, and share peripherals and audio between the computers.

We hope you enjoy using your new IOGEAR USB KVMP switch, yet another first-rate connectivity solution from

IOGEAR!

IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft

Corporation. IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple

Computer, Inc. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any

kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change

without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this document.

Welcome

Table of Contents

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Package Contents

Overview

Features

System Requirements

Introduction

Installation

Basic Operation

Hotkey Operation

Keyboard Emulation

Ethernet Switch

Firmware Upgrade

Appendix – Troubleshooting

Specification

Technical Support

Radio & TV Interference Statement

Limited Warranty

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Package Contents

This package contains:

1 x GCS1772 or GCS1774 KVM Switch

2 x Custom 6’ KVM cables (for GCS1772)

4 x Custom 6’ KVM cables (for GCS1774)

1 x Firmware upgrade cable

1 x Power adapter

1 x User manual

1 x Quick start guide

Check to make sure that all the components are present and that nothing was damaged in shipping. If you

encounter a problem, contact your dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any

damage to the unit, and/or any of the devices that connect to it.

Overview

IOGEAR’s Symphony multi-function KVM Switch represents the new wave in KVM technology. The GCS1774

allows you to control four computers using a single VGA monitor, USB keyboard and mouse. In addition, it has

a built-in USB 2.0 hub, Ethernet 10/100 switch, and Audio sharing capabilities.

With its built-in USB 2.0 High Speed hub, slow transfer rates are a thing of the past. Fully compatible with USB

2.0 standards, this KVM allows you to share your USB peripherals and transfer data at up to 480 Mbps. In

addition, the audio ports allow you to connect one set of speakers and microphone, and share them among your

computers.

To complement your KVM setup, IOGEAR’s Symphony KVM sports a full-featured Ethernet 10/100 switch. This

built-in Ethernet switch allows you to easily add the computers in your KVM setup to your Ethernet network.

Among its many features, it supports auto-sensing, 10/100 Mbps speed, and is fully compliant with 802.3

networking standard.

Features

• Multi-function USB KVM switch integrates a USB 2.0 hub, Ethernet switch, and Audio

• Controls multiple computers with a single VGA monitor, USB keyboard and mouse

• Built-in USB 2.0 peripheral sharing to share printers, scanners, hard drives, etc., with data transfer rates

of up to 480 Mbps.

• Built-in Ethernet switch to expand your existing broadband network

• Share one set of speakers with all your computers

• Independent switching of KVM, USB peripherals, and audio focus

• Port selection via Hotkeys and front push-buttons

• Auto scan mode for monitoring all computers

• Power on detection – automatically switches to the first powered on port

• Superior video quality - up to 2048 x 1536

• Firmware upgradeable

• Easy installation – no software required

• Keyboard and mouse emulation for error-free boot up

• Hot pluggable – add or remove computers without powering down the switch

• Compatible with multiple operating platforms (PC, Mac, and Sun)

• All cables included

System Requirements

Console

• VGA or SVGA monitor

• USB mouse

• USB keyboard

Computer

• VGA or SVGA port

• USB port for keyboard/mouse cable

• USB 2.0 port for USB hub cable

• Supports Windows 98SE/ME/2000/XP; Mac OS 8.6 or higher; Solaris; Linux

Audio

• Requires powered speaker system

Front View

2. Ports LEDs

The Ports LEDs are built into the port selection

switches. The upper ones are the KVM port LEDs; the

lower ones are the USB LEDs.

1. Port selection buttons

•Switch console only - Press selection button for

less than two (2) seconds

to bring only the KVM

focus to the computer attached to its

corresponding port

•Switch everything - Press selection button for

longer than four (4) seconds

to bring KVM, Audio,

and USB Hub focus to the computer attached to

its corresponding port.

•Press and hold port selection switches 1 and 2

for more than two seconds to start Auto Scan

Mode.

KVM LEDs

•Lights DIM ORANGE to indicate that the

computer attached to the corresponding port is

up and running (On Line)

Introduction

•Lights BRIGHT ORANGE to indicate that the

computer attached to its corresponding port is

the one that has the KVM focus (Selected)

•Flashes to indicate that the computer attached to

its corresponding port is being accessed under

Auto Scan mode.

USB LED

•Lights DIM GREEN to indicate that there is a

USB cable connection to the computer attached

to its corresponding port. Does not light if there

is no USB connection to the computer

•Changes to BRIGHT GREEN to indicate that the

computer attached to its corresponding port is

the one that has access to the USB peripherals.

3. Ethernet LEDs

The Ethernet LEDs light to indicate data transmission

status of their corresponding ports on the built-in

Ethernet switch:

4. USB Hub

USB peripherals (printers, scanners, hard drives, etc.)

can plug into these ports

Introduction

Back View

1. Ethernet port

Connect CAT 5 LAN cables to these ports.

2. Console Audio jack

The cables from your microphone and speakers plug

in here. Each jack is color coded and marked with an

appropriate icon.

3. Firmware upgrade port

The included Firmware Upgrade cable that transfers

the firmware upgrade data from the administrator’s

computer to the KVM plugs into this connector. See

Firmware Upgrade section for more details.

to these ports.

4. Power Jack

The power adapters plugs into this jack.

Introduction

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IOGear Schalten Handbücher

IOGear

IOGear M1323-a Bedienungsanleitung

IOGear

IOGear GCS1716 Bedienungsanleitung

IOGear

IOGear GUB231 Bedienungsanleitung

IOGear

IOGear HUB-C+ Bedienungsanleitung

IOGear

IOGear MiniView GCS78 Bedienungsanleitung

IOGear

IOGear GCS661U Bedienungsanleitung

IOGear

IOGear GHSW8441 Bedienungsanleitung

IOGear

IOGear GCS1412TAA4C Bedienungsanleitung

IOGear

IOGear GCS1808i Bedienungsanleitung

IOGear

IOGear GCS602 Bedienungsanleitung

IOGear

IOGear GUWH104 Bedienungsanleitung

IOGear

IOGear GCS22U Bedienungsanleitung

IOGear

IOGear M1123 Bedienungsanleitung

IOGear

IOGear GUB201 Bedienungsanleitung

IOGear

IOGear MiniView II GCS124U Bedienungsanleitung

IOGear

IOGear GCS2HU Bedienungsanleitung

IOGear

IOGear GUWH104KIT Bedienungsanleitung

IOGear

IOGear MiniView GCS632U Bedienungsanleitung

IOGear

IOGear GCS1644 Bedienungsanleitung

IOGear

IOGear GCS182 Bedienungsanleitung

IOGear

IOGear GUH304 Bedienungsanleitung

IOGear

IOGear MicroHub GUH274W3 Bedienungsanleitung

IOGear

IOGear KeyMander Nexus GCS1337 Bedienungsanleitung

IOGear

IOGear MiniView G-CS102U Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch