IPA 9060 Bedienungsanleitung

OPERATOR’S MANUAL

MOBILE TIRE

PRESSURE EQUALIZER

Innovative Products of America®Incorporated

845-679-4500 •888-786-7899

234 Tinker Street, Woodstock, NY 12498 •www.ipatools.com

be reproduced, displayed, modied or distributed without the express prior written permission

of the copyright holder. For permission, contact [email protected].

#9060

(OEM) Original Equipment Manufacturer USA

My name is Peter Vinci and I am the president of IPA®. I would like to thank you for

your interest in IPA®’s product line and share my commitment to you, our products

and our policies. In today’s world, we have all experienced the lack of service and

consideration demonstrated by many companies after you buy their products. They

say whatever they can to make the sale, and then it’s like pulling teeth to get any ser-

vice response out of them. I know this myself rsthand and because of this, I want to

be sure that your experience with IPA® meets your expectations and that IPA®never

disappoints you with our service or customer response.

To prove my commitment to you, if for any reason, you are not happy with one of our

products or more importantly, with the response from our customer service or any

member of the IPA®team, I invite you to contact me directly via my email, peter@

ipatools.com or call me at 888-786-7899. Your satisfaction is more important to me

than the sale itself. We will not be in business for long if we don’t make you com-

pletely happy with our products and service. I want IPA®to be different and be known

for its quality and service.

With that said, please take a look at our product line. You will see innovative rst time

products that were created to help you do your job faster and better than before.

I would also like to invite you to critique our products. If you can think of a better way

to make them or changes that will make them work better, please contact me directly

and I will be sure to look into it. If you have an innovation and would like some feed-

back, give me a call.

From all of us at IPA®, we thank you for taking the time to review our product line and

wish you and your family the very best of everything.

Peter Vinci

President

IPA®

www.ipatools.com

Toll Free: 888-786-7899

Phone: 845-679-4500

Fax: 845-679-4600

LETTER FROM THE PRESIDENT OF IPA®

IMPORTANT SAFETY INSTRUCTIONS

IT IS IMPORTANT TO READ, UNDERSTAND AND FOLLOW ALL SAFETY

MESSAGES & INSTRUCTIONS PRINTED IN THIS MANUAL AND ON THE

EQUIPMENT BEFORE OPERATING. IF SAFETY INFORMATION IS NOT HEEDED,

RESULTS IN DEATH OR SERIOUS INJURY TO THE OPERATOR OR BYSTAND-

ERS MAY OCCUR.

DANGER indicates a hazardous situation, if not avoided, will result in death or seri-

ous injury. The possible hazards are shown in the adjoining symbols or explained in

the text.

WARNING indicates a hazardous situation, if not avoided, could result in death or

serious injury. The possible hazards are shown in the adjoining symbols or explained

in the text.

CAUTION indicates a hazardous situation, if not avoided, may result in minor or

major injury. The possible hazards are shown in the adjoining symbols or explained in

the text.

POTENTIAL EXPLOSIVE AIR HAZARD Pneumatic pressures

used with this equipment can cause explosive failures on damaged

equipment.

POTENTIAL EYE HAZARD Wear OSHA approved safety glasses.

High air pressures create hazardous situations for eyes.

WARNING

When applying air to tires, adhere to common safety practices to avoid

dangerous tire blow outs.

• DONOToverinatetires

• Maximuminlet160PSI

• Donotadjustregulatorpastthetiremanufacturer’smaximumPSIrating

NOTE:TheinationtimesprovidedbytheMobileTirePressureEqualizerare

directly related to shop air CFM capability, shop air hose ID, and average

startingPSIoftire(s)tobeinated.

DESCRIPTION OF COMPONENTS

TheMobileTirePressureEqualizerismadewithonlyqualitycomponents.

Gauges: Two 3.5 in. glycerin lled, temperature compensated, within 1% accuracy

Regulators: Two high-ow adjustable regulators

Fittings: All internal and external ttings are optimized for maximum air volume

Hoses: Five color-coded 3/8 in. hoses

Body: 20 gauge powder-coated steel

Tires: Pneumatic (4 PSI) with steel axle

Handle: Telescoping heavy duty design

TheMobileTirePressureEqualizer is designed to be the most accurate analog tire

ination machine possible. The utilization of a single gauge arrangement avoids

“tolerance stacking” when comparing air pressures of two or more tires. This ensures

an accurate, consistent result every time. The MobileTirePressureEqualizer

features two regulators, two gauges and ve different color hoses. The black hose is

intended for the front steer tire on the tractor/truck/van and is controlled by dedicat-

ed toggle switches, gauge and regulator. The red, yellow, blue and gray hoses are

intended for use on the drive tires on tandem axle arrangements. The four colored

hoses are each controlled by a dedicated toggle switch and are plumbed into the

right hand side gauge. The control panel provides the recommended wheel designa-

tion for each hose to aid your shop in accurate and consistent data logging.

IPA®MOBILE TIRE PRESSURE EQUALIZER

Fig. 1: Equalizer Diagram

Air Chuck

Holster

(4 Screws

Provided) Wheel

Foot, Axle and Tire

(See Assembly

Instructions)

Left and Right

Hose Hangers

(4 Screws and

2 Brackets

Provided)

Drive Axle

Gauge

Valves

Handle

Air On/Off

Shop Air In

Drive Axle

Regulator

Front Steer

Axle Regulator

Five Color-

Coded

Hoses

Front Steer

Axle Gauge

INCLUDED: Wheel, Axle, Foot, Front, Air Chuck Holster, Left and Right Hose

Hangers, 5 Color-Coded Air Hoses (Black, Gray, Blue Yellow, Red)

AXLE AND WHEEL INSTALLATION

1. Insert axle (Fig. 2-A) into left and right axle bores (Fig. 2-B) at rear underside of

the MobileTirePressureEqualizer.

2. Slide one spacer (Fig. 2-C) onto each side of the axle (Fig. 2-A).

3. Install one wheel (Fig. 2-D) onto each side of the axle (Fig. 2-A) with valve stem

facing away from the MobileTirePressureEqualizer.

4. Insert one E-clip (Fig. 2/3-E) into the groove (Fig. 3-F) in the axle end in front of

the wheel to each side.

5. CHECK TIRE PRESSURE – MUST NOT EXCEED 8 PSI.

(Optimum pressure is 4 PSI.)

Fig. 2: Axle and Wheel Installation

UNDERSIDE

FRONT

FOOT INSTALLATION

• Remove nuts (Fig. 4-B) and washers (Fig. 4-C) from the 2 studs(Fig. 4-D) at

bottom side of the unit.

• Install the foot (Fig. 4-A) over the 2 studs (Fig. 4-D) with the 90 degree bend

(right angle) facing forward.

• Slide one washer (Fig. 4-C) onto each

stud (Fig. 4-D).

• Install and tighten one nut (Fig. 4-B)

onto each stud (Fig. 4-D).

Fig. 3: E-Clip Installation

Fig. 4: Foot Installation

NOTE: Install the Foot at the bottom

of the unit with 45° angle side towards

the back of the unit.

GAUGE SPECIFICATIONS

Temperature compensated: The ICD (internal compensating device) compensates

the gauge (to 150F) for changes in internal case pressure caused by uctuations in

ambient temperature. (Especially critical in lower pressure and vacuum gauges.)

Performance Data:

• Accuracy ±1% Full Scale Grade 1A

• Design ANSI/ASME B40.1

• Operating Temp. -40 to 150F

Temperature Error: Additional error when temperature changes from reference

temperature of 68F (20C) +-0.4% for every 18F (10C) rising or falling as a percentage

of Span.

TIRE PRESSURE CHECK

1. Turn all switches to the CLOSED position.

2. Connect each air chuck to corresponding wheel.

3. Open one toggle at a time to read the tire’s corresponding air pressure.

4. Repeat steps 1 and 3 for each tire.

INFLATION AND EQUALIZATION INSTRUCTIONS

1. Make sure all switches/valves are in closed position.

2. Connect clean, dry shop air to MobileTirePressureEqualizer.

3. Open shop air valve.

4. Adjust regulator(s) to desired PSI.

5. Place all toggle switches in open position.

NOTE: TheinationtimesprovidedbytheMobileTirePressureEqualizerare

directly related to the following factors – shop air CFM capability, shop air hose

ID,andaveragestartingPSIoftire(s)tobeinated.

6. Wait approximately three to ve minutes, then note air pressure on gauge(s). The

gauge reects the average air pressure of all tires within its circuit.

7. Once air pressure on the gauge(s) reects the desired air pressure, wait one

additional minute to ensure full equalization of air pressure.

STOWING HOSES AND AIR CHUCKS

The MobileTirePressureEqualizer has been equipped with several options for

stowing hoses. When rolled up properly, all hoses can be stowed inside the lower

storage compartment. This type of storage is intended for transport or longer term

storage. Usage of the front mounted holsters may be ideal, even when stowing

hoses. During daily use, the air chucks should be lowered into the front holsters, and

the bulk of the hose should be coiled up and hung by the side hangers. You may also

choose to leave the hoses on the shop oor and insert the air chucks into the front

holster between jobs.

PASS FAIL

ROUTINE MAINTENANCE

• The MobileTirePressureEqualizershould be kept in a temperature controlled

environment. Only clean dry shop air should be used. Wipe down and clean the

hoses and face panel regularly.

• The pneumatic tires should be inated to 4 PSI.

• It is recommended that the air gauges are checked every six months to ensure

they have maintained accuracy. To have the air gauges factory calibrated,

call 845-679-4500.

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

iPA 9060 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken