IPshop IP0051 Bedienungsanleitung

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 1 of 20

IP0051 – SIP/IAX based VoIP Phone

User Guide v. 1.1

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 2 of 20

Content

1. Technical Parameter and Hardware Specifications ……………………………………….. 3

1.1 Technical Parameter ………………………………………………………………………. 3

1.2 Hardware Specifications ………………………………………………………………….. 3

2. Packing ……………………………………………………………………………………. 3

3. Safety Information ………………………………………………………………………... 4

4. Installation ………………………………………………………………………………… 5

5. Keypad and LED Description …………………………………………………………….. 6

5.1 Keypad description ………………………………………………………………………... 6

5.1.1 Number Key Description …………………………………………………………………. 6

5.1.2 Function Key Description ………………………………………………………………… 7

5.1.3 Softkey Description ……………………………………………………………………….. 8

5.2 LED status display explanations ………………………………………………………….. 9

6. Configuration via Keypad ………………………………………………………………… 9

6.1 Network config …………………………………………………………………………… 9

6.2 VOIP config ………………………………………………………………………………. 11

7. Configuration via WEB …………………………………………………………………… 11

7.1 Network Configuration …………………………………………………………………… 12

7.2 SIP Configuration ………………………………………………………………………… 13

7.3 IAX2 Registration ………………………………………………………………………… 15

7.4 Function Key ……………………………………………………………………………… 15

7.4.1 LINE ………………………………………………………………………………………. 16

7.4.2 Memory Key ……………………………………………………………………………… 16

7.4.3 Key Event …………………………………………………………………………………. 17

7.4.4 DTMF ……………………………………………………………………………………... 17

8. Basic Call Functions ……………………………………………………………………… 17

8.1 Making calls ………………………………………………………………………………. 17

8.2 Answering calls …………………………………………………………………………… 18

8.3 HOLD ……………………………………………………………………………………... 18

8.3.1 Call waiting ……………………………………………………………………………….. 18

8.3.2 Call holding ……………………………………………………………………………….. 18

8.4 Forward …………………………………………………………………………………… 18

8.5 Blind transfer ……………………………………………………………………………… 18

8.6 Attend Transfer …………………………………………………………………………… 19

8.7 Three Way Call …………………………………………………………………………… 19

8.8 SMS ………………………………………………………………………………………. 19

8.9 Customized Ringtones ……………………………………………………………………. 19

9 Software Upgrade …………………………………………………………………………. 19

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 3 of 20

1. Technical Parameter and Hardware Specifications

1.1 Technical Parameter

Support Protocol:

Support SIP (RFC3261, RFC2543)

Support IAX2

Support Voice codec: G711A/u, G729, and G723.1

Support G.168 echo cancellation standard, compliant 96ms with speaker mode.

Support Jitter Buffer, VAD, CNG, SIP Domain name register, point-to-point Call

Support RTP and RTCP voice communication

Support the Inbound/Outbound transmission; SIP info, DTMF Relay, RFC2833

Support many countries' standard ring

NAT transversal: Support STUN, CITRON, AVS Mode

Support SIP domain, SIPAuthentication (none, basic, MD5), Domain Name parse

Support 5 SIP servers and 1 IAX2 account synchronously, can call in and out by either proxy

Support SIP application, including SIP call forward/transfer/holding/waiting

Network Features:

Support two models: Bridge and Router, integrate two ports router function.

Support basic NAT and NAPT.

Support PPPoE for xDSL, and support off hook auto dial.

Support DHCP Client for WAN;

Support DHCP server for LAN;

Support DNS relay on LAN port and can provide DNS service for LAN Network equipment.

Support DNS SRV on WAN port

Support SNTP Client, can auto-obtain time from internet

Use advanced DSP tech to insure high quality voice

Use advanced jitter buffer tech to prevent the delaying and losing for package information

Support Network Tools, including ping, race route, and telnet client.

Support three modes to configure WAN port IP, they are: static, DHCP, and PPPoE.

Provide firewall control for small LAN.

Provide optional communication priority level for small LAN.

Support VPN—L2TP and Openvpn(SSL) protocol

Support Secondly Layer QoS (802.1p)

Advanced Function:

Support headset

Support 128*64 LCD

Support Power over Ethernet (POE) function

3 Interactive soft key, with more humanized operating prompt.

Support 5 SIP servers synchronously.

Support local voice record, message and server message.

Support sending and receiving short message

Support message wait indication.

Support user defined ring tone.

Support L2TP client.

Support call pickup, join call, auto-redial.

Support 5 programmable keys, 5 PSTN keys and 5 SIP keys, and it can be connected with the

expansion board

which can display more numbers' online status.

Support presence, BLF, Pust to talk

Support dial switchboard and extension number at one time, directly get through the ext. later.

Support phone book, and can set different rings according to different incoming callers.

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 4 of 20

Call waiting, call transfer, three ways call, and multi-call forward

Caller ID display, ban calling out, setting no-disturb, dial number

automatically while picking up the telephone,

set VIP numbers.

Set the black name list and confine numbers

Support point-point calling directly.

Support flexible methods of receiving numbers.

Support silence suppression and silence detection.

Support noise background simulation.

Support echoes suppression and auto gain.

1.2 Hardware Specifications

Item IP0051

Standard AC Adapter Input:100-240V Output:5V 1.5A or PoE(802.3af, optional)

Interface WAN 10/100Base- T RJ-45 for LAN

LAN 10/100Base- T RJ-45 for PC

LCD size 128 * 64 full-dot matrix LCD

Operation Temperature 0～40℃

Operation Humidity 10～65%

Main Chipset MIPS32(150M), DSP(100M）

SDRAM 16M

Flash 4M

2 Packing

Please check whether the packing contains the following or not.

The basic unit with handset

One cable

Standard 5V/1.5A power supply

IP0051 extension board (optional for wholesales)

3 Safety Information

You have two options for providing the IP0051 with power:

●Power over the Ethernet (IEE 802.3af compatible)

●An external power supply (5V/1.5A)

Warn: Non-factory power supply may cause the phone damage.

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 5 of 20

4 Installation

●First connect one end of the handset cable to the handset, and connect the other end to RJ11 port

on the phone’s left and bottom side.

●Plug the Ethernet (network) cable into the RJ45 connector labeled WAN, and the other end is

connected with internet or LAN.

●If you want to use labeled LAN port, use another Ethernet cable to connect PC with the phone’s

LAN port.

●If you are using an external power supply, get the standard 5V/1.5A power supply and connect

it to the phone’s power port; If you are using POE, just connect the Ethernet cable to the WAN

port, and the other end of cable is connected with the POE device.

●If you want to use a headset, connect the earphone(excluded in our packing) with the phone.

Please be sure the quality of the headset or the voice quality may be badly affected.

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 6 of 20

5 Keypad and LED Description

5.1 Keypad description

The numeric keypad with the keys 0 to 9, * , and # is used to enter digits and lettters. Depending

on the operating mode, different actions can be performed (see the table below):

5.1.1 Number Key Description

Key Digits Lower case Upper case

1 . - ? ! / : @ ‘ ’（）+%

1 . - ? ! / : @‘ ’（）+%

abc2

ABC2

def3

DEF3

ghi4

GHI4

jkl5

JKL5

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 7 of 20

mno6

MNO6

pqrs7

PQRS7

tuv8

TUV8

wxyz9

WXYZ9

*“*”“．”

Eg: 192*168*1*110 “*”“．”

Eg: 192*168*1*110

(SPACE)_0

#End the number and send;

# can also be used to

change and switch input

method(ABC, abc,123)

End the number and send;

# can also be used to

change and switch input

method(ABC, abc,123)

5.1.2 Function Key Description

KEY Description

Adjust volume (lower/higher); in standby mode for ring tone volume adjustment, in

hands-free mode for speaker volume and in off-hook mode for headphone volume

adjustment.

Mute Microphone (on/off); When Mute function is on, LED light turns red.

Press this key to answer the call by headset.

Server’s record function. In the call status, press this button and the phone will send

a serial of pre-configed DTMF to registering server. Then server begin to record.

Press this button again, server will turn off the record. It needs server’s support.

When the phone get a new voice message, the MESSAGE light will flashes. Users

can press PLAY button and the phone will dial the special number to play the

message automatically.

Callist to display the Received calls, Missed calls, Dialed calls

Phonebook

Main menu

In stand-by mode, press this key to check Missed calls.

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 8 of 20

KEY Description

Press this key to check phone’s IP address in standby mode.

Check dialed call record in standby mode; adjust the volume in off-hook mode and

move the cursor to the left side in input mode.

Press this key to check SIP1-SIP5 registeration status in standby mode, adjust

volume in off-hook mode and move the cursor to the right side in input mode.

LED for MWI (Message waiting indication) ; When the phone get a new voice

message,the MESSAGE light will flashes.

RLS to home state

Establish 3-way conference.

In call status, press TRANSFER+number+# can make Blind transfer; Press

TRANSFER+number+Send(softkey2) can make Attend transfer.

Call hold / unhold; In call status, firstly press HOLD to hold the call; and press

HOLD again to unhold the call.

Press this button to send the number; In standby mode to Redial.

Speaker; In standby mode, press this button to enter hands-free mode; When there

comes the call, press this key to answer the call in hands-free mode.

Dynamic group function keys; In different situations, 3 softkeys including functions

such as enter, save, quit, del , edit, option, send, redial, split, divert and so on.

F1-F5; User-defined programmable keys;

They default as LINE1-LINE5. Right side LED

color indicates different status of LINE1to LINE5.

5.1.3 Softkey Description

Softkey is especially designed to improve the phone’s convenient and friendly operations.

For simple prompt keys, users can check it easily; Let’s mainly introduce the function keys below:

Function keys Descriptions

SMS In standby mode, press softkey1 to check and send the message.

SDial In standby mode, press softkey2 to edit and check the speed dial config.

DND In standby mode, press softkey3 to enable/disable DND(don’t disturb).

Divert When there comes the call, press this key and input the number you want to transfer

then the call will be transferred directly.

Reject Press this key to reject the incoming call.

Reset When LINE1 is in call hold status, press this key to redial the LINE2 so that LINE1

can be holded and user can dial the LINE2 again.

Retrv When LINE1 is in call hold status, press this key to quit the call hold and turn back

to LINE1 talk status.

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 9 of 20

Function keys Descriptions

Conf Press this key to make 3-way conference call; this key functions the sameas

CONFERENCE on the keypad.

Switch Press this key to switch the line you want to hold or unhold.

Split In 3-way conference state, press Split to end it, bu can be available to keep the

communication with the other two separately.

End In 3-way conference state, press End to end all communications with the other two at

the same time.

Option While checking phonebook and call record, press Option to enjoy further more

operations.

5.2 LED status display explanations

●MUTE LED: when MUTE is on, LED displays red if there is incoming call or in the call status.

●Network LED: LED is dark means no connection on WAN port; LED flashes green light means

there exist network flow.

●POE LED: When Power over Ethernet function turns on, LED is bright with light.

●Power LED: It brights means power supply is available.

●Memory LED: It can display different color and tell the presence status. Red color means the

ext. is offline, green means the ext. is free and available, while the flashing green light means the

ext. is busy or in the call status. More info please check 7.4.2 Memory Key.

●Message LED: It will flashes when there is voice mail from the server.

●LINE LED: Failed registration, LED is green and flashes occasionally.

When comes the call and it rings, LED will frequently flash green light.

In HOLD mode, LED will frequently flash green light.

In call status, LED is on with green light.

6 Configuration via Keypad

6.1 Network config

The phone defaults to obtain IP address via DHCP.

If DHCP mode isn’t supported from your netwrok environment, please congif static IP address

according to the following instructions:

Press MENU key and select “Advanced” as the picture shows.

Enter password 123 and select “Network”. Then you can select the net mode according your

network connection model. Let’s take Static IP config for an example.

IP0051 User Guide ver. 1.1

5 SIP + 1 IAX page 10 of 20

Press to select DHCP or Static mode.

Select “Static”, and you can config IP address as the following instructions shows:

Press “Edit” key to edit IP address. You can use left/right key to move the cursor and insert the

character to input IP address. Never forget to press “Save” key to finish and save the config.

Config Netmask, Default Gateway and DNS by following the aboved steps.

After the network is configured, we now begin to config VoIP account.

Inhaltsverzeichnis

Andere IPshop IP-Telefon Handbücher

IPshop

IPshop WIP0020 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung