Iridium EDGE Bedienungsanleitung

IridiumEdge™

Demo Kit Quick Installation Guide

Prior to using the Iridium Edge™ read and understand the Iridium Edge

User Manual including the safety warnings and information.

Failure to do so could result in serious injury or death.

INTRODUCTION

Thank you for purchasing the Iridium Edge Demo Kit! This kit allows

prospective customers to evaluate the Iridium Edge and Iridium’s

network services before developing applications.

The Iridium Edge Demo Kit includes an Iridium Edge device, cabling,

power supplies and six (6) months of demonstration airtime, and

access to a Demonstration App for iPhone® which can be found

on the Apple iOS App StoreSM.

Iridium partner Global Satellite Engineering (GSE) provides an Iridium

enabled Mapping Portal as part of this demo. Demo Kit users are not

required to use this portal and are welcome to explore or evaluate

other options. Iridium can provide a list of other partners who have

Iridium-enabled mapping platforms.

If you have any questions concerning Iridium Edge or the Demo Kit

during the evaluation period, please contact Iridium’s support team

at [email protected].

When an evaluation is complete, users should contact Iridium at

[email protected] to discuss next steps to integrate Iridium into

their applications. Demo Kit users that qualify as a direct Iridium VAR

can work directly with Iridium to obtain development documentation and

purchase additional Iridium Edge products and/or airtime. Alternatively,

Iridium will refer users to existing Iridium partners who can support their

development and provide billing/provisioning platforms to assist their

integration with Iridium. In both cases, the user can continue to use

the Iridium Edge device purchased with the Demo Kit.

Iridium will automatically deactivate the Iridium Edge at the end

of the evaluation period if no alternative arrangements are made.

Continued use will require users to contact an existing Iridium partner

to purchase network services.

REGULATORY COMPLIANCE

In most cases, the Iridium Edge requires country certication before it

is used. Iridium has obtained certication for the Iridium Edge in key

regions. If you have any questions or concerns regarding regulatory

compliance, contact Iridium or the Iridium Service Provider that sold

you the Iridium Edge Demo Kit.

INSTALLATION COMPONENTS & PARTS LIST:

1. Iridium Edge Demo Kit includes the following parts:

AIridium Edge

BIridium Transceiver Cable

(iPhone™ to DB9)

CBreakout Cable

DAutomotive Power Adapter

(Cigarette Adapter Plug)

EAC Adapter with

International Plugs

FSerial to USB Converter

(Optional; for advanced use)

GPlug to Leads

(Optional; for advanced use)

2. Iridium Edge Demo Kit includes airtime

·25 Kb per month (over 2,000 location reports)

· Valid for 6 months after rst activation, no more than

1 year after purchase of the Demo Kit

3. User Supplied Materials Required for Evaluation using a vehicle

·An iPhone 5 or greater with a Lightning™ connector is

required. The Demo Kit does not support Android devices

·Materials to safely secure the Iridium Edge to a vehicle

·A vehicle with a 12V cigarette plug

4. Optional Iridium Edge Demo Kit items

Some items included in the Demo Kit are for advanced use and will

not be needed by all evaluators

·Serial to USB Converter. This item is for users wishing to connect

the Iridium Edge to a PC using a serial emulation program.

Users can also use this accessory to develop or trouble shoot an

Iridium Edge application once the evaluation is complete. Detail

serial port parameters can be found in the Iridium Edge user

documentation available on iridium.com.

·Plugs to Leads. This item is for users allowing them to power the

Iridium Edge from an alternate DC power supply instead of using

the included AC adapter or Automotive Power Adapter.

* After disconnecting the Transceiver Cable, wait at least 30 seconds

before reconnecting. Otherwise, iOS may not correctly recognize

the Transceiver Cable.

STEP 1: INSTALL THE APP

The Demo Kit App requires a fully charged

iPhone with iOS 10.0 or higher. Download the

“Iridium Edge Demo App” from the App Store.

Open the Iridium Edge Demo App and take the tour

to familiarize yourself with the general operation.

(The tour is only shown when the app is rst launched.)

STEP 2: CONNECT IRIDIUM EDGE

Open the Demo Kit and make connections as shown below:

Connect the Iridium Edge

Transceiver Cable*B

to the iPhone.

Connect the CBreakout

Cable to the Iridium Edge

Transceiver Cable. C+ B

Take the AIridium Edge

unit out of its box and connect

it to the Breakout Cable. A

+ C

Connect EDC Adaptor to the

Breakout cable E

+ Cand then

plug it into a wall outlet with the

appropriate international plugs.

STEP 3: VERIFY APP CONNECTION

In the Iridium Edge Demo App, navigate

to the Device Screen and conrm that

Device Status indicates “Connected”

and that an IMEI number is displayed.

(The IMEI is a 15-digit number on the

bottom of the Iridium Edge device, and

is used to recognize the device on the

Iridium network.)

If the Device status does not indicate

“Connected”, double check all cable

connections and ensure that power is

present. If the App still does not show

the Device is connected, continue to the

Trouble Shooting Section at the end

of this document.

STEP 4: PROVISION IRIDIUM EDGE

To operate properly, the Iridium Edge device must be provisioned. Use

the “Check Now” button on the app to start the process. Alternatively,

access www.iridiumedgedemo.com to manually provision the device.

Select “Create a New Account” and enter elds specied in Step #1.

While not required, it is recommended that your username is also your

email address. Write down and record all credentials.

In Step #4, the “Basic” for the routing options should be selected.

Under “Choose Icon”, select the icon you would like to display

the location of the Iridium Edge when position is reported through

the demo app.

Finally, select “Add Iridium Edge”. A new account will be created

provided that the IMEI number:

·is for an Iridium Edge demo device

·hasn’t been used previously to create a Mapping portal account

·is not already activated on the Iridium gateway

STEP 4: PROVISION IRIDIUM EDGE (Continued)

Step #2 and Step #3 describe how to connect the Iridium Edge Demo

App to the Iridium Edge. If not prelled, enter the IMEI of the unit

along with any name you want to give the Iridium Edge unit.

STEP 6:

CONFIGURE APP REPORTING

On the “Location” page, conrm

that your current position is displayed

with a blue dot.

Select a Report Pace of 2 minutes and

press the “Start” button to enable the

phone to send regular location-based

reports. If your position is not shown,

ensure Location Services in your

phone setting is enabled for the app.

The “Transmit Timer” counts down

to the next report transmission.

Using the app with GPS Reporting

enabled allows the Iridium Edge to

receive service requests from Iridium,

as well as transmit GPS reports. When

GPS Reporting is enabled, the Demo

App continues to run even when the iPhone is left idle or when

other Apps are selected; thus allowing it to service requests

from the Iridium network and transmit the GPS reports.

STEP 5: VERIFY PROVISIONING

With the Iridium Edge device connected

to the Iridium Edge Demo App, select

the “Check Provisioning” button on the

Device page to conrm provisioning.

(This step requires a data connection

and does not use the Iridium satellite.)

STEP 7: INSTALL ON VEHICLE

Read the Quick Installation Guide, including the Safety Warnings

that are located in the Iridium Edge shipping box.

Before removing the red cover from the double sided tape on the

Iridium Edge and afxing the device to your vehicle, be aware that

tape mounting is intended to be permanent and later removal will

damage a vehicle’s nish.

Park the vehicle in an open area with 360 degrees visibility of the

sky without any obstruction from objects such as buildings, trees

or large vehicles.

The Iridium Edge should be mounted at on a vehicle, facing

upwards. Secure the breakout cable inside the vehicle, taking

care to keep a minimum length of <10cm (`4 in) of cable outside.

Be sure to secure Iridium Edge so as to not cause damage

to persons or property. If you have any concerns about the

adequacy of the mounting for the Iridium Edge, seek advice

from an installation technician or other qualied individual.

After ensuring power is available inside

the vehicle, connect the “Automotive

Power Adapter” to the breakout cable

and insert into car power port or cigarette

lighter socket.

STEP 8: SEND AND RECEIVE SATELLITE MESSAGES

Conrm all cables are properly connected. Refer to Step 3

“Verify App Connection”

On the Device page, conrm that signal indicator shows at least three

bars, ideally 4 or 5 bars. If less than three bars are visible for more

than sixty seconds, conrm good visibility to the sky in all directions.

With an adequate signal level, the Iridium Edge Demo App should

start reporting at regular intervals.

Go to the Chat page, type a test message and press “Send”.

Wait till the message is timestamped and transmitted. These

messages can be read and replied to on the demo portal.

Drive the vehicle at a slow speed (<40km/h, 25mi/h) to ensure the

Iridium Edge remains safely mounted to the vehicle. Drive vehicle

for a suitable duration to allow the App to send the expected number

of messages at two-minute intervals. Observe all driving laws and

safety guidelines in your jurisdiction.

Upon completion, disconnect all cables and power.

STEP 9: CONFIRM SATELLITE PERFORMANCE

With a browser, log into the Mapping Portal (iridiumedgedemo.com)

with the same credentials used to create the account.

In order to send messages

to the Iridium Edge, select the

“Send Message” command from

the pulldown list by the mail envelope

and enter the desired message text.

Once the “Send Message” button

is pressed, the Mapping Portal

updates the display to show that the

“Message was Successfully Sent”

to the Iridium gateway. Messages

will appear on the Iridium Edge Demo

App once the device successfully

connects to the network.

See all previous incoming messages

and the status of the outgoing text

messages by selecting the “Mail

Envelope” on the left of the pulldown

arrow. The Incoming tab lists all the

text messages from the Iridium Edge.

The Outgoing tab lists all the text

messages to the Iridium Edge.

The Alerts tab is not required for the evaluation.

In the Outgoing tab, the Sent status is “Delivered” if the Iridium Edge

acknowledged receiving the message. Otherwise, the Sent status is

“Submitted” meaning the message is at the Iridium Gateway and not

yet transmitted to the Iridium Edge. This window is not automatically

refreshed if the Iridium Edge receives the message. Update the status

by using the “Refresh” button.

Andere Handbücher für EDGE

Inhaltsverzeichnis

Andere Iridium Marine-GPS-System Handbücher

Iridium

Iridium Pilot Bedienungsanleitung

Iridium

Iridium 9500 Bedienungsanleitung

Iridium

Iridium Pilot Bedienungsanleitung

Iridium

Iridium EXTREME Bedienungsanleitung

Iridium

Iridium GO! Bedienungsanleitung

Iridium

Iridium 9555 Bedienungsanleitung

Iridium

Iridium EXTREME Bedienungsanleitung

Iridium

Iridium Extreme PTT Bedienungsanleitung

Iridium

Iridium 9555 Bedienungsanleitung

Iridium

Iridium 9505 Bedienungsanleitung

Iridium

Iridium EXTREME Bedienungsanleitung

Iridium

Iridium 9555 Bedienungsanleitung

Iridium

Iridium 9555 Bedienungsanleitung

Iridium

Iridium 9505A Bedienungsanleitung

Iridium

Iridium 9555 Montageanleitung

Iridium

Iridium 9575 Programmierhandbuch

Iridium

Iridium extreme 9575 Bedienungsanleitung

Iridium

Iridium 9555 Bedienungsanleitung

Iridium

Iridium 9555 Gebrauchsanweisung

Iridium

Iridium 9575 Bedienungsanleitung

Iridium

Iridium SAILOR SC4150 Bedienungsanleitung

Iridium

Iridium 9505 Produktinformationsblatt

Iridium

Iridium 9555 Bedienungsanleitung

Iridium

Iridium 9522-P Bedienungsanleitung

Beliebte Marine-GPS-System Handbücher anderer Marken

JRC

JRC JHS-183 Bedienungsanleitung

Thuraya

Thuraya IP Voyager Bedienungsanleitung

Furuno

Furuno GP-1610CF Bedienungsanleitung

Raytheon

Raytheon NautoPilot NP 5100 Bedienungsanleitung

Garmin

Garmin GPSMAP 8008 MFD Bedienungsanleitung

Furuno

Furuno GP-1650WDF Bedienungsanleitung

Beam

Beam Terra 800 Bedienungsanleitung

Sailmon

Sailmon E4 Bedienungsanleitung

AUTOHELM

AUTOHELM ST50 PLUS Bedienungsanleitung

ASTRO

ASTRO X-5 twin B Bedienungsanleitung

Garmin

Garmin GPS 16 Series Referenzhandbuch

Satcube

Satcube Ku Bedienungsanleitung

Thuraya

Thuraya ATLAS IP+ Bedienungsanleitung

Radio Zeeland DMP

Radio Zeeland DMP Sigma 120 Bedienungsanleitung

METRACKCO

METRACKCO SVT600/T1/T3 Bedienungsanleitung

Garmin

Garmin GPSMAP 190-01120-00 Bedienungsanleitung

Thuraya

Thuraya SatSleeve Bedienungsanleitung

Humminbird

Humminbird 532162-1_B Bedienungsanleitung