IRoom FixDock mini Bedienungsanleitung

 xDock mini

Installation instructions

The ﬁ xDock backbox.............................................. Page 2

Scope of delivery, Important information............. Page 3

Mounting ................................................................. Page 3

List of contents

Speciﬁ cations, Information .........................................Page 4

Warranty ........................................................................Page 5

Please read these operating instructions and adhe-

re to the content and recommendations they contain

before installing, starting up and operating the ﬁ xDock.

Bitte lesen Sie vor Installation, Inbetriebnahme und Be-

dienung der iRoom ﬁ xDock die Bedienungsanleitung

und folgen Sie den Anweisungen und Empfehlungen.

Installationsanleitung

ﬁ xDock for/für:

iPad mini iPad mini 2

iPad mini 3 iPad mini 4

General information

The f ixDock can be installed both vertically

and horizontally.

It is important that the wall mounting surface

is level and smooth, so the backbox can be

 xed without deformation.

During installation the protective card has to

be placed into the backbox.

Description of function

The  xDock may only be used with the  ush-

mounted backbox. Operation without the

backbox will void the warranty. Missuse of the

backbox is prohibited.

Mounting in Cavity walls

1. Attach the aluminum frame (2) to the backbox (3) and bolt

them together using the included mounting screws (1)

2. Prepare a recess in the wall

(W/H/D: 176,0 / 275,0 / 90,0 mm - 6,9“ / 10.8“ / 3.5“)

3. Fix the cavity wall mounting brackets (5) inside the cavity

wall (in a distance of 275 mm - 10.8‘‘) using screws or

double-sided tape

4. Screw the cavity-wall mounting clips (6) to the backbox.

5. Break out knockouts on the backbox (3) for leading in

cables and pipes.

6. Leed in the power leads through the knockouts in the back

box . Use a suitable cable grip sleeve.

7. Place the backbox (3) in the recess. Do not deform the

backbox.

8. Screw the cavity-wall mounting clips (6) tight. Ensure a

straight,  ush wall and distortion-free installation of the

 ush box. Otherwise it may cause mechanical problems.

Mounting in Masonry

1. Prepare a recess in the wall

(W/H/D: 176,0 / 275,0 / 90,0 mm - 6,9“ / 10.8“ / 3.5“)

2. Attach the plaster work protection lid (4) to the backbox (3)

and bolt them together with the included mounting screws

(1)

3. Break out knockouts at the backbox (3) for leading in

cables and pipes.

4. Leed in the power leads through the knockouts in the back

box . Use a suitable cable grip sleeve.

5. Place the backbox (3) in the recess and  x it. Do not

deform the backbox. Consider thickness of plaster / wall

 nishing!

6. Plaster in the backbox (3) and ensure a straight,  ush wall

and distortion-free installation of the back box. Otherwise it

may cause mechanical problems.

7. After  nishing plasterwork and wall  nishing remove the

plaster frame (4) and attach the aluminum frame (2)!

Installation instructions

Recess dimensions backbox

(W/H/T): 176,0 / 2755,0 / 90,0 mm ........ 6.9“ / 10.8“ / 3.5“

For instructions of installing the back box, please refer to page 2.

1. Prepare a connector in the back box to accommodate the original tablet power adapter

2. Connect the tablet to tablet power supply

3. Fix the tablet with the enclosed moutnig rings.

4. Push the xDock into the aluminium frame. Make sure you do not damage the power leads.

Ensure a proper locking of the magnetic mounting system.

5. Switch on main power supply.

6. To remove the dock from the aluminium frame use the enclosed sucker!

Scope of delivery

xDock mini (1x) - xDock backbox (1x) - aluminium frame (1x) - mounting screw (4x) - cavity wall installation brackets (2)

plasterwork protection lid (1) - expander ring (2x) - installation instructions (1x) - sucker (1x)

Mounting

All connection and installation work must be conducted by certied electricians in compliance with the general rules and directives for

electrical installations.

The xDock has a smooth and shiny surface which is prone to scratches. Handle with care to avoid damage. Do not clean with liquids

or uids. We recommend wearing soft cotton wool gloves during installation.

• Select a suitable place to mount the device

• Do not mount or use the xDock in wet or moist environments

• The place chosen to mount the device must provide enough recess depth to allow use of the backbox and the entry of the leads.

• Mount the device in a place that enables reception of a suitably strong Wi-Fi signal so that the tablet can also be used when it is

docked.

Important information

Installation instructions

Product illustration

Product illustrations are exemplary illustra-

tions and can deviate from supplied products

Product illustration

exploded view

Installation instructions

Product illustration

Product illustrations are exemplary illustra-

tions and can deviate from supplied products

Product illustration

bezel with tablet, rear view,

mounting bands attached

Power Supply

(USB/Lightning/...)

rope clip

Please pay attention to correct

positioning of the rope clips.

Dimensions fixDock (W/H/T):.................................... 176,0 / 275,0 / 90,0 mm .......... 6,9“ / 10.8“ / 3.5“

Cut out dimensions installation box (W/H/T):........... 194,0 / 284,0 / 90,0 mm .......... 7.6“ / 11.2“ / 3.5“

Power supply:.................................................................. Original Power supply from tablet (not included)

Accessories:...................................................................................................... Security Kit (not included)

fixDock Security Kit

(not included and should be purchased separately)

Speci cations

Protection against theft

 xDock DOES NOT GUARANTEE ANY PROTECTION against theft. Unauthorised forceful removal of an tablet cannot be

prevented. no liability in case of theft of the tablet shall accept. To protect your tablet, use  xDock Security Kit.

Safety instructions

• Protect the device from  uids to avoid damage caused by  re or electric shocks!

• The device must not be subject to maintenance by users! Installation and deinstallation must be conducted by certi ed

electrical technicians!

• Do not put any foreign objects into the device!

• Should any  uids or objects enter or fall into the device, or should the device become damaged, disconnect the device

from the power supply immediately!

Important information

Installation instructions

Warranty

Guarantee

The guarantee period shall run for two (2) years from the date of purchase made by the original end customer, unless the device has

been repaired or replaced due to the invocation of guarantee rights. In such case the guarantee shall remain valid until the expiry of

the original guarantee period or six (6) months from the date of repair/replacement – whichever period expires rst.

Claims for defects and claim validation

Should your xDock fail or cease to function as desired, please contact your dealer and provide the original invoice, the serial

number and a description of the error. The dealer will arrange for the device to be inspected by the manufacturer or a technician

authorised by the manufacturer. The inspector can then conrm a defect has been identied within the guarantee period, has been

caused by defective materials or manufacturing, and is not subject to exclusion from the guarantee.

Exclusion from guarantee coverage

The following damages and sources of damage are excluded from the guarantee:

• Acts of God;

• Misuse, including (but not limited to) failure to comply with assembly, mounting or operating instructions;

• Incorrect operation;

• Connection to an unsuitable power supply;

• Repairs and attempted repairs conducted by unauthorised individuals;

• Use of the device in connection with products from other sources;

• Devices whose manufacturer serial number has been changed, deleted, removed or made illegible;

• Upgrading of devices above and beyond the specications, features or functions listed in the operating manual

Limits to liability

The above guarantee portrays the entire scope of liability applicable to manufacturer. Hence, the manufacturer shall decline any

further claims for liability for loss or damage (except in proven cases of gross negligence) resulting from the purchase, acquisition,

ownership, possession, sale or use, of this device.

Under no circumstances the manufacturer accept any liability for subsequent consequential damages, delays, unsuitable or incorrect

information or advice, and violation of copyright. The rights of the purchaser as regards defects shall not be affected.

Various conditions

Absolutely nobody, including all sales and distribution partners, dealers, agents and sales representatives, shall have any

right whatsoever to take on responsibility for guarantee rights or to alter them in any way on behalf of the manufacturer.

The purchaser shall take sole responsibility for ensuring the device is suitable for the purpose for which it is to be used.

Installation instructions

Visit our website:

www.iRoomsiDock.com

equate to any form of guarantee. All products mentioned (Apple iPad and Samsung Galaxy Tab in particular) remain the property of the respective

manufacturer and are protected by international copyright and patent laws.

iRoom GmbH

Paracelsusstrasse 4

A-5110 Obernorf

Austria

Andere Handbücher für fixDock mini

Inhaltsverzeichnis

Andere iRoom Rack & Stand Handbücher

iRoom

iRoom miniDock Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung

iRoom fixDock mini Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken