Itek ITAIOBB27IH51WB Bedienungsanleitung
User Manual
All In One PC
ITAIOBB27IH51WB
Content
All In One PC Brief Introduction……………………………………………………ENG−2
All In One PC Parts Guide………………………………………………………………..ENG−5
General Guide
Safety instructions
This article provides information about thevarious components in the All In One
computer and how to use it. The main chapters ofthis article are as follows:
The following safety instructions can prolong the service life of the All In One computer. Please follow all
precautions and instructions. Ifyou encounter any problems, other than those described in this article,
please contact qualified personnel. Do not use damaged power cords, accessories, orother peripheral
devices. Do not allow strong solvents (such as thinner, benzene, or otherchemical substances) to occupy
or approach the surface of the All In One computer.
Note for users
Please payattention to the precautions andwarnings in this article, they can ensure thatyou
complete certain operations smoothly and safely.The importance of these precautions varies, as
described below:
Note:Tips and information for special situations.
Tips: Tips and useful information for completing tasks.
Important! Important information that must be followed in order to prevent damage to data and
components orpersonal injury.
Warn! Important information that must be followed for safe operation.
The text contained in [ ] or < > represents the keys on the keyboard; do not actuallytype < > or [ ]
and the characters in parentheses.
1. Introduction to All In One computers
Introduce All In One computers and related documents.
2. Guided tourof each part of the computer
Provides information about thevarious components in the
All In One computer.
< >
[ ]
ENG-2
All In One PC Brief Introduction
2
13
Power Connector
Preparation before use
Connect the power adapter
The following is just a briefdescription of the preparations before using the All In One computer. For more
information on using the All In One computer, please refer to the subsequent pictures.
ENG-3
All In One PC Brief Introduction
Assembly
Open the packing box and take out the All In One machine;
Turn the All In One machine upside down, and the assembly is complete;
Place the machine flat on the table, and fix the base to the machine with screws;
The power switch is used to turn on and off the power of the All In One computer, or to put the All In One
computer into sleep or hibernation state. The actual function ofthe power switch can be customized in the
following position inWindows: Desktop>"Settings"> "Control Panel"> "System and Security"> "PowerOptions".
ENG-4
Fixing screw position
All In One PC Brief Introduction
1
3
2
Back component
Please refer to the figure below to identify the components on the back of the All In One computer.
Power Switch
The power switch is used to turn on and off the powerof the integrated computer, or put the All In
One computer into sleep or hibernation state. The actual function ofthe power switch can be
customized in the "Power Options" of theWindows Control Panel.
ENG-5
USB (Universal Serial Bus) allows multiple devices to be connected to a computerat the same
time, and some of the peripheral devices serve as additional docking stations or hubs. USB
supports hot-plugging of devices, so you can connect and disconnect most peripheral devices
without restarting the computer.
All In One PC Parts Guide
3
USB2.0 Port
1 42
42
1
3
Front Side Components
Display Screen
Used to display the output content of the computer.
Please refer to the figure below to identify the components on the front of the All In One computer.
ENG-6
All In One PC Parts Guide
1
1
Le Component
Please refer to the figure below to identify the components on the le side of the All In One computer.
ENG-7
All In One PC Parts Guide
Right Component
Please refer to the figure below to identify the components on the right side of the All In One computer.
ENG-8
All In One PC Parts Guide
Inhaltsverzeichnis
Sprachen:
Andere Itek Desktop Handbücher
