iWantit iW200 Bedienungsanleitung
USB Power Adapter
Quick Start Guide
iW200
Before using this adapter, please read the instructions below:
1. Choose an appropraite input plug (British-type,
European-type, American-type or Australian-type)
and slide it onto the adapter.
2. Connect one end of the USB cable to the adapter.
3. Connect the other end of the USB cable to the iPod.
4. Plug the adapter into a 100-240V mains socket.
5. Unplug the adapter from the mains socket when
not in use.
6. To detach the input plug from the adapter, press
down the button at the back of the adapter and
slide the input plug out.
Note:
• For indoor use only.
• Always insert the USB device in the correct direction. Failure to do so may result
in damage to the USB device and this product.
• Do not remove the USB device whilst it is being accessed.
• Only use with products designed to be powered or charged via a USB port.
• Electrical interference and electrostatic discharges may cause the USB device to
malfunction and suer damage, resulting in data loss.
• It is strongly recommended that any important data is backed up on a PC to
protect against corruption, data loss or device malfunction. Please note that
our company shall not accept any liability for damage or loss of stored data.
Technical Specication
Input Voltage: 100-240V ~ 60/50Hz
Output Voltage: Output: DC 5V 1000mA, 5VA (Max)
This symbol on the product or in the instructions means that your electrical
and electronic equipment should be disposed at the end of its life separately
from your household waste. There are separate collection systems for recycling
in the EU. For more information, please contact the local authority or your
retailer where you purchased the products
Inhaltsverzeichnis
Andere iWantit Adapter Handbücher
