Jabra EASYGO Bedienungsanleitung

USER MANUAL

Jabra EASYGO

english

JABRA EASYGO

CONTENTS

THANKYOU....................................................2

ABOUTYOURJABRAEASYGO...................................2

WHATYOURHEADSETDOES ...................................3

GETTINGSTARTED..............................................4

CHARGEYOURHEADSET .......................................4

TURNING YOUR HEADSET ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . . 5

PAIRINGITWITHYOURPHONE .................................5

WEARINGSTYLE................................................6

HOWTO .......................................................7

USING JABRA EASYGO WITH TWO MOBILE PHONES . . . . . . . . . . . . . 8

TROUBLESHOOTING&FAQ.....................................9

NEEDMOREHELP?............................................10

TAKING CARE OF YOUR HEADSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

GLOSSARY....................................................11

english

JABRA EASYGO

THANK YOU

Thank you for purchasing the Jabra EASYGO Bluetooth® wireless

technology headset. We hope you enjoy it! This instruction manual

will get you started and ready to make the most of your headset.

ABOUT YOUR JABRA EASYGO

A Answer/end button

B On/o button

C StatusDisplayTM With battery indicator and Bluetooth®

connection indicator

D Charging socket

E Volume up/volume down

F Jabra Comfort EargelTM

G Earhook

english

JABRA EASYGO

WHAT YOUR HEADSET DOES

Your Jabra EASYGO lets you do all this:

- Answer calls

- End calls

- Reject calls*

- Voice dialling*

- Last number redialling*

- Call waiting*

- Put call on hold*

- Mute

- Multiuse™ - being connected to two Bluetooth® devices at the

same time

Specications

- Talk time 6 hours

- Standby time 8 days

- Bluetooth® specication version 2.1 with EDR and eSCO

- Weight 8 gram

- Operating range up to 10 meters (approximately 33 feet)

- Supported Bluetooth® proles: HFP, HSP

- Internal rechargeable battery charged by wall charger

- Always see your battery and connection status on the

Jabra StatusDisplay™

- Digital sound enhancement via DSP technology

- Noise reduction on transmitted and received audio

- Noise dependent volume control*

- Automatic volume adjustment on receive audio

- Acoustic shock protection

- e-SCO for enhanced audio quality

- 128 bit encryption

* Phone dependent

english

JABRA EASYGO

GETTING STARTED

Follow these three steps before using your headset:

1. Charge your headset

2. Activate Bluetooth® on your mobile phone (refer to the manual for

your Mobile phone)

3. Pair your headset to your mobile phone

The Jabra EASYGO is easy to operate. The answer/end button on

the headset performs dierent functions depending on how long

you press it.

Instruction Duration of press

Tap Press briey

Double Tap 2 quickly repeated taps

Press Approx: 1 second

Press and hold Approx: 5 seconds

CHARGE YOUR HEADSET

Make sure that your headset is fully charged for two hours before

you start using it. Use the AC power supply to charge from a

power socket. When the battery indicator has a solid red light,

your headset is charging. When the headset is fully charged

the battery indicator turns solid green for five minutes and is

then turned off.

Use only the charger provided in the box - do not use chargers

from any other devices as this may damage your headset.

Please note: The lifetime of the battery will be signicantly reduced

if your device is left uncharged for a long period. We therefore

recommend that you recharge your device at least once a month.

english

JABRA EASYGO

TURNING YOUR HEADSET ON AND OFF

- Slide the on/off button towards the symbol “I” to turn the

headset ON. When you do so both indicators will ash on the

Jabra StatusDisplay™.

- Slide the on/o button towards the symbol “O” to turn the

headset o.

PAIRING IT WITH YOUR PHONE

Headsets are connected to phones using a procedure called

‘pairing’. By following a few simple steps, a phone can be paired

with a headset in a matter of minutes.

1 Put the headset in pairing mode

- When you turn on your Jabra EASYGO for the rst time, the

headset will automatically start up in pairing mode – i.e. it is

discoverable for your phone. When the headset is in pairing

mode the Bluetooth® status indication on the StatusDisplay™ is

ashing.

2 Set your Bluetooth® phone to ‘discover’ the EASYGO

- Follow your phone’s instruction guide. First make sure that

Bluetooth® is activated on your mobile phone. Then set your

phone to discover new devices. This usually involves going

to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and

selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.*

3 Your phone will nd the Jabra EASYGO

- Your phone will nd the headset under name “Jabra EASYGO”.

Your phone then asks if you want to pair with the headset.

Accept by pressing ‘Yes’ or ‘OK’ on the phone. You may be

asked to confirm with a passkey or PIN. Then use 0000

(4 zeros). Your phone will conrm when pairing is complete

and the Bluetooth® status indication on the StatusDisplay™ will

shift from ashing light to steady light and the headset voice

guidance will say “connected”.

* Phone dependent

english

JABRA EASYGO

CONNECTIVITY

SELECT

MobilSurf

BLUETOOTH

Infrared port

Wap options

Synchronization

Networks

DEVICES FOUND

Jabra EASYGO

Passkey:

****

HANDSFREE

SELECT

Jabra EASYGO

added.

The handsfree is

now ready for use

SELECT

Manual pairing mode

If you wish to use the headset with a dierent phone, or if the

pairing process was interrupted, you can manually set the headset

to pairing mode.

Make sure the headset is on. Press and hold the answer/end button

for approximately 5 seconds until the Bluetooth® icon turns from

a steady light to a ashing light. Then repeat steps 2 and 3 in the

above pairing guide.

Connecting with your phone

Pairing is only needed the rst time a headset and phone are

used together. When the headset and phone have been paired

once, they will automatically connect when the headset is on and

Bluetooth® is activated on the phone. The headset can be used

when it is “connected” to the phone. If the devices are paired, but

do not immediately connect, tap the answer/end button. When

your headset is connected the Bluetooth® connection icon in the

STATUSDISPLAY™ WILL BE CONSTANT ON FOR 3 SECONDS and

the headset voice guidance will say “connected”.

WEARING STYLE

The Jabra EASYGO is ready to be worn with or without the ear hook.

The ear hook can be removed and the headset can be used with

the Ultimate-t Eargels™.

The Ultimate-t Eargels™ can be used for both left and right wearing.

The Ultimate-t Eargels™ come in two dierent styles to t any ear.

You can also twist the eargel slightly to optimize the t and comfort.

For optimal performance, wear the Jabra EASYGO and your mobile

phone on the same side of your body or within line of sight. You will

get better performance when there are no obstructions between

your headset and your mobile phone.

english

JABRA EASYGO

HOW TO

Answer a call

- Tap the answer/end button on your headset to answer a call.

End a call

- Tap the answer/end button to end an active call.

Reject a call*

- Press the answer/end button when the phone rings to reject an

incoming call. Depending on your phone settings, the person

who called you will either be forwarded to your voice mail or

will hear a busy signal.

Make a call

- When you make a call from your mobile phone, the call will

(subject to phone settings) automatically transfer to your

headset. If your phone does not allow this feature, tap on the

Jabra EASYGO’s answer/end button to transfer the call to the

headset.

Activate voice dialling*

- Press the answer/end button. For best results, record the voice

dialling tag through your headset. Please consult user manual

of your phone for more information about using this feature.

Redial last number*

- Double tap the answer/end button when the headset is on and

not used.

Adjust sound and volume*

- Tap the volume up or down to adjust the volume.

Mute/un-mute

- To mute, press both volume up and down at the same time.

A low beep alert plays during a muted call.

- To un-mute, tap either of the volume buttons.

* Phone dependent

english

JABRA EASYGO

Call waiting and placing a call on hold*

- This lets you put a call on hold during a conversation and

answer a waiting call.

- Press the answer/end button once to put the active call on

hold and answer the waiting call.

- Press the answer/end button to switch between the two calls.

- Tap the answer/end button to end the active conversation.

HOW THE STATUSDISPLAY™ WORKS

Bluetooth®

Indicator

Indicates if your headset is connected to your

phone

- Solid light means headset is connected to your

phone

- Flashing light means headset is in ‘pairing mode’

and ready to be connected to a new phone

Battery

Indicator

Indicates battery level and if headset is turned ON

- Green light indicates that the headset has more

than 30 minutes of talk time remaining

- Red light indicates that the headset has less

than 30 minutes of talk time remaining

To save battery the Jabra StatusDisplay™ is turned o after 3 seconds.

Get an instant status from the Jabra StatusDisplay™ by a tap on any

button on the headset when you are not on a call.

HOW THE VOICE GUIDANCE WORKS

When your headset has established a connection to your phone (or

other Bluetooth® device) the voice guidance will say “connected”.

When your headset has less than 30 minutes talk time remaining

the voice guidance will say “low battery”.

USING JABRA EASYGO WITH TWO MOBILE PHONES

Jabra EASYGO is capable of having two mobile phones (or

Bluetooth® devices) connected to the headset at the same time.

This will give you the freedom of having only one headset to

operate both your mobile phones.

* Phone dependent

english

JABRA EASYGO

In order to use the headset with two mobile phone please make

sure you have ”paired” the Jabra EASYGO with both phones. See

the section “PAIRING IT WITH YOUR PHONE” for instructions.

Once you have “paired” your headset with two phones simply

make sure your headset is on, and that Bluetooth® is enabled on

the phones and the headset will then automatically connect to

both phones.

Please note that Last Number Redial will dial the number from

the last outgoing call, independent of the mobile phone, and the

Voice Dialling function will only work on the last paired mobile

phone.

TROUBLESHOOTING & FAQ

I hear crackling noises

- Bluetooth® is a radio technology, which means it is sensitive to

objects between the headset and the connected device. It is

designed for the headset and the connected device to be used

within 10 meters (33 feet) of each other, with no major objects

in the way (walls, etc.).

I cannot hear anything in my headset

- Increase the volume in the headset.

- Ensure that the headset is paired to a device that is playing.

- Make sure your phone is connected to the headset by tapping

the Answer/End button.

I am having pairing problems

- You may have deleted your headset pairing connection in your

mobile phone. Follow the pairing instructions.

I want to reset the headset

It is possible to reset the headset. Turn the headset ON. Then

’Press and hold’ the volume down and answer/end buttons at

the same time for approx. 5 seconds until the battery icon and

Bluetooth® icon flash 5 times simultaneously - then the pairing

list is reset.

- Turn the headset OFF . The next time you power on, the headset

will go into pairing mode as the rst time you powered your

new EASYGO on.

Andere Handbücher für EASYGO

Inhaltsverzeichnis

Andere Jabra Headset Handbücher

Jabra

Jabra Talk 2 Bedienungsanleitung

Jabra

Jabra EASYCALL Bedienungsanleitung

Jabra

Jabra BIZ 2400 II Bedienungsanleitung

Jabra

Jabra BT620S - MANUAL 2 Bedienungsanleitung

Jabra

Jabra GN2100 - DATASHEET FOR WIDEBAND IP TELEPHONY Bedienungsanleitung

Jabra

Jabra BT2010 - ANNEXE 746 Bedienungsanleitung

Jabra

Jabra PRO 920 Installationsanleitung

Jabra

Jabra GN9330e - USB - Headset Bedienungsanleitung

Jabra

Jabra Pro 9450 Mono Bedienungsanleitung

Jabra

Jabra GN2100 Bedienungsanleitung

Jabra

Jabra 9200 Series Bedienungsanleitung

Jabra

Jabra Motion UC MS Bedienungsanleitung

Jabra

Jabra GO 660 Bedienungsanleitung

Jabra

Jabra Evolve 75e UC Bedienungsanleitung

Jabra

Jabra GN9330e - USB - Headset Installationsanleitung

Jabra

Jabra Motion Office MS Bedienungsanleitung

Jabra

Jabra EXTREME2 Bedienungsanleitung

Jabra

Jabra EXTREME Gebrauchsanweisung

Jabra

Jabra Engage 75 Bedienungsanleitung

Jabra

Jabra PRO 920 Bedienungsanleitung

Jabra

Jabra M5390 Bedienungsanleitung

Jabra

Jabra GN9120 Flex Bedienungsanleitung

Jabra

Jabra Evolve 65e UC Bedienungsanleitung

Jabra

Jabra GN2100 IP Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung

Plantronics

Plantronics VOYAGER 520 Bedienungsanleitung

Blueant

Blueant X5i Bedienungsanleitung