Jabra Engage 55 - USB-A MS Stereo with
Charging Stand
How do I use conference mode with the Jabra Link 400?
Conference mode lets you connect up to three additional headsets with
one Jabra Link 400.
To connect a headset for conference mode, follow these steps.
1. Ensure the additional headset is turned off. Turn off the headset by
pressing and holding (4 seconds) the Call button.
2. Press and hold (4 seconds) the Call button.
3. Press and hold (1 second) the button on the Jabra Link 400 DECT
adapter to pair with the headset.
4. A voice prompt will play in the primary headset. Press the Call button
on the primary headset to accept the additional headset to the
conference call. The audio will now be shared between the headsets.
By default, the additional headset will be muted.
5. Repeat these steps for each additional headset.
To end the call for all headsets, press the Call button on the primary
headset.
Additional headsets can leave conference mode by pressing the Call
button on the headset. The conference mode will continue for all other
headsets.
You can configure conference mode settings using Jabra Direct.
