Janam XG series Bedienungsanleitung
XG Series
Quick Start Guide™
040212XGcom.7
Purpose-Built Technology.®
Janam XG Series Quick Start Guide
XG Series Quick Start Guide
Copyright 2012 Janam Technologies LLC. All rights reserved.
XG Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names
may be trademarks or registered trademarks of their respective owners.
Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide. Janam
Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through the use of
this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by deletion of data as
a result of malfunction, dead battery or repairs. To protect against data loss, be sure to make backup copies (on other
media) of all important data.
Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact
Janam. For a copy of the Product User Guide, visit the Resource Center at www.janam.com
Important: Please read the End User License Agreement for this product before using the device or the
accompanying software program(s). Using the device or any part of the software indicates that you accept the terms
of the End User License Agreement.
1
Janam XG Series Quick Start Guide
To help you get started with your XG Series mobile computer, this guide features:
-Hardware Overview
-Getting Started
-Regulatory Information
For additional product details, visit www.janam.com.
For software updates and information, visit www.microsoft.com.
Content and Additional Resources
2
Janam XG Series Quick Start Guide
Hardware Overview
1. Power
2. Right Function Key
3. Microphone
4. Front Indicator LED Lights
5. LCD Screen
6. Navigation Keys
7. Left Function Key
8. Escape/Clear Key
9. Indicator LED Light
10. Syncing/Charging Connector
11. Space Key
12. Green Control Shift Key
13. Enter Key
14. Blue Function Shift Key
15. Backspace Key
16. Orange Function Shift Key
17. Indicator LED Light
3
5
8
9
64
7
12
1
2
3
10
11
13
15
16
14
17
Please Note: There are several keypad congurations.
For other keypad layouts, please visit www.janam.com
Janam XG Series Quick Start Guide
Hardware Overview
1. Scan Window
2. Scan Trigger Button
3. Handle/Battery Chamber
4a. Base of Battery
4b. Battery Release Plunger
5. Lanyard Connector
6. Speaker
7. Memory Card Door
8. Memory Card Door Screws
9. Rear Indicator Lights (Tail Lights)
10. Syncing/Charging Connector
2
5
1
4a
3
9
6
10
5
78
4
4b
Janam XG Series Quick Start Guide
Getting Started
A. INSTALLING THE BATTERY
1. Insert the top of battery into chamber opening and gently slide battery into battery chamber (Figure 1).
Do not force past point of resistance.
2. Turn the battery so that the base of the battery is perpendicular to the device handle (Figure 2).
This aligns the battery notches with the battery chamber which is required to insert the battery.
3. Once the battery is properly aligned with the handle, press the battery into the battery chamber.
4. Rotate the battery base clockwise until the base of the battery is parallel with the device. The battery release plunger
will click and lock the battery into place (Figure 3).
B. REMOVING THE BATTERY
1. To remove the battery, fully press the battery release plunger and hold while rotating the battery counter-clockwise until
it stops (battery base will be perpendicular to device handle).
2. Grip the battery base and pull battery from battery chamber.
5
BATTERY
Figure 1
Perpendicular
Figure 2 Battery
Release
Plunger
Parallel
Figure 3
Base of
Battery
Janam XG Series Quick Start Guide
Getting Started
C. CHARGING THE BATTERY
Important Note: The backup battery, which allows the main battery to be hot-swappable, must charge at a low current.
Initial charge-time for the backup battery, therefore, is 72 hours. This initial charge-time is required prior to rst use or
after a full drain of the backup battery. Please see the Product User Guide for additional details.
To charge the battery using the USB Cable or Serial Cable:
1. Connect the power supply to the USB or serial cable.
2. Connect snap-on end of USB or serial cable to syncing/charging connector at the bottom of device (Hardware
Overview #10) making sure the JANAM logo on the connector faces front.
3. Insert appropriate AC adapter and plug in the power supply. Use only easily accessible wall outlets that are
easily reached with the length of supplied power cable.
To charge the battery using the Single-Slot or Four-Slot Cradle:
1. Connect the power supply to the cradle.
2. Connect the line cord to the power supply.
3. Insert appropriate AC adapter and plug in the power supply. Use only easily accessible wall outlets that are
easily reached with the length of supplied power cable.
4. Place the device in cradle. The LED will illuminate to conrm connection (orange indicates charging, green
indicates fully charged and red indicates fault).
5. The battery is fully charged in approximately 5 hours.
6. For Single-Slot cradle only: Charge a spare battery by placing the battery in the spare battery well with
connectors lined up. An LED will illuminate to conrm connection.
6
Janam XG Series Quick Start Guide
D. CALIBRATING THE SCREEN
The rst time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen
instructions using the stylus to tap the exact center of each target.
Note: If your XG Series device came pre-loaded with a custom software application, the Welcome Utility may not appear.
E. LCD BACKLIGHT ADJUSTMENT
To adjust LCD backlight, tap the following sequence: Start > Settings > Control Panel > Display > Backlight > Advanced,
then adjust on-screen slider with stylus or use the navigation arrow keys.
Getting Started
7
Janam XG Series Quick Start Guide 8
Regulatory Information
Regulatory Information
Regulatory reference number: Model numbers XG100, XG105
All devices are designed to comply with local rules and regulations to the countries they are shipped. Any
changes or modications made to Janam products without Janam’s approval could void the user’s authority
to operate the equipment. Only use Janam approved or recommended batteries and accessories. Use of
alternative batteries or accessories will invalidate approval given to the device and may be dangerous.
Laser Caution Label
The laser caution label appears on the back of the product as shown below.
Power Supply
Use only Janam approved power supply model number EA10302.
Janam XG Series Quick Start Guide 9
RF Exposure Guidelines
This device was tested for typical body-worn operations. To maintain compliance with FCC and Canada RF exposure
compliance requirements, use only Janam approved hand strap and accessories for this product.
To comply with FCC RF exposure compliance requirements, the following antenna installation and device congurations
must be satised:
1) Users are not permitted to make changes to or modify the system in any way, and
2) Connecting external antenna to the card is prohibited. This device and antenna must not be co-located or operated
with any other antenna or transmitter.
Radio Frequency Interference Requirements
United States
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
For further information contact:
Janam Technologies LLC
100 Crossways Park West, Suite 105
Woodbury, NY 11797 USA
Any changes or modications made to this device that are not expressly approved by Janam may void the user’s authority
to operate the equipment.
Inhaltsverzeichnis
Andere Janam Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
