Jarv Nmotion BTHL-201 Bedienungsanleitung
Jarv Nmoon BTHL-201
Bluetooth Stereo Earbuds
Users Guide
Features:
• Bluetooth wireless technology
• Comfortable lightweight in-ear design with detachable sports ear
hooks for added support
• High Denion Stereo Sound with Noise Reducon
• Rechargeable baery with Up to 5 Hours of Talk/Music me
• Stream Audio from any Bluetooth Device
• Built-In Noise Canceling Microphone for taking calls
• Control unit has built in Volume, Play, Pause and Answer funconality
• Tangle Free cable
Package Contents:
• Jarv Nmoon BTHL-201
Bluetooth Stereo Earbuds
• Micro USB Charging Cable
• 3 sets of ear bud ps
(S,M,L)
• 2 detachable sport ear
hooks
• 2 stabilizers
• Carry pouch
• Users Guide
Thank you for choosing Jarv
Bluetooth Stereo Earphones!
A Body Nmoon tends to stay in Moon
Control Unit:
• Micro USB Charging port
• Volume +/Previous Track
• Power/Play/Pause/Pair
• Volume – / Next Track
• Pairing/Power LED Indicator
• Microphone
Led Indicator Guide
Status Indicator
Power On Flashing Blue Light
Power O No Light
Charging Red Light
Charging Complete Blue Light
Pairing Mode Red And Blue Light ash alternately
Low Power Flashing Red Light
Geng Started
To use your Jarv NMoon Bluetooth Stereo headset, please follow the
steps below:
1. Ensure your Bluetooth headset is fully charged.
2. Pair your Bluetooth headset with a Bluetooth-enabled device prior
to use. (See Pairing your Headset instrucons)
Charging Your Headset
Your Nmoon headset comes with a built-in rechargeable baery and
a Micro USB charging cable.
Your Nmoon headset can be charged either directly from an AC
power supply (not included) or through your PC. Charge fully before
use. The baery indicator will turn red when charging and turn blue
once charging is complete. Inial charging me is approximately 2-3
hours.
Pairing Your Headset
In order to use your Jarv Nmoon Bluetooth Stereo Earbuds with a
Bluetooth-enabled device, you will rst need to pair the two.
1. Place the headset and the mobile phone where they are easily
viewable and no more than one meter apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is turned o (Very important)
4. Press the Pairing buon (middle buon with phone icon) for
5 seconds unl the red and blue light ash alternately which
indicates that you are in Pairing Mode.
5. Acvate your mobile phone’s Bluetooth pairing funcon.
6. Set the mobile phone to search for Bluetooth devices within range
and select “Nmoon BTHL-201” from the list of devices shown.
7. If you are prompted for a Passcode enter “0000” and press “ok” to
pair the headset with your mobile phone. (Note: If the Bluetooth
version of your phone is 2.1, there is no need to enter the passcode
when pairing.)
8. Now you can use your Bluetooth headset to listen to music, and
make and receive phone calls. Some mobile phones will connect
automacally to the Jarv Nmoon Bluetooth Earbuds when
restarted.
Powering On the Headset
Press and hold down the Power buon for 3 seconds to turn the unit
on and o.
Wearing Your Headset
The Le / Right indicator is located on the inside of the Earbuds.
Using Your Headset
Answering a Call
When you receive a call, the ring tone will be heard through the
headset. Press the Power buon once to accept the call, or answer
the call normally via your mobile phone.
Rejecng a Call
Press the Power buon for 2 seconds to reject the incoming call.
Ending a Call
Press the Power buon once to end the call or hang up on your
mobile phone.
Adjusng the Volume
Hold down the Volume + to increase volume or Volume – to decrease
volume. You will hear a beep when you reach the maximum or
minimum volume level. (You can also adjust the volume on your
handset or device).
Play/Pause Music
When the Bluetooth headset is connected with your mobile phone,
press the Power buon once to play music. Press Pause buon
quickly to pause music. (Aenon: your mobile phone must support
A2DP prole.)
Previous Track
Press the “Volume +” key to select the previous track.
Next Track
Press the “Volume -” key to select the next track.
Connecon With The Last Paired Device
When powered on, the headset will automacally connect with
the last successfully paired device. If the connecon is successful,
it enters standby mode. If the devices fail to connect within 5
minutes aer the pairing has been iniated, the headset will turn o
automacally.
Inhaltsverzeichnis
Andere Jarv Kopfhörer Handbücher
Jarv
Jarv NMotion SPORT TWS Bedienungsanleitung
Jarv
Jarv Mach 1 BTHL-750 Bedienungsanleitung
Jarv
Jarv Active Motion JRV-TW900-BLK Bedienungsanleitung
Jarv
Jarv Wave Sport PRO JRV-TW700 Bedienungsanleitung
Jarv
Jarv Flight BT-650 Bedienungsanleitung
Jarv
Jarv BTHL-101 Bedienungsanleitung
Jarv
Jarv NMOTION Bedienungsanleitung
Jarv
Jarv Joggerz Pro Sports BT501 Bedienungsanleitung
Jarv
Jarv JRV-TW800 Bedienungsanleitung
Jarv
Jarv Joggerz BT-301 Bedienungsanleitung
