Jaycar Electronics AC1714 Bedienungsanleitung
4 x 2HDMI Matrix
Switcher Splitter – AC1714
User manual
1
Introduction
This is a high performance HDMI Matrix with 4 x HDMI inputs & 2 x HDMI outputs. It allows any 4
connected source (Blue-Ray player, HD DVD player, console, etc.) to be shown on the any of the two
displays simultaneously, and supports 4K×2K, 3D, 12-bit Deep Color. With its 3Gbps bandwidth and
the additional features of the latest HDMI standards you can be sure of great HDMI distribution.
Features
1. HDMI 1.4a video format support up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
2. 3D video support including Frame packing for all 3D formats up to a 297MHz TMDS clock.
3. Supports deep color up to 48-bit per pixel.
4. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
5. Supports the reception of any audio data conforming to the HDMI specification 1.4 such ad
L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR
6. Supports EDID control via EDID Selector.
2
Package
1. HDMI Matrix ------------------------------------------------------------------------------------ 1PCS
2. 5V1A DC Power Supply adaptor ------------------------------------------------------------- 1PCS
3. Operation Manual ------------------------------------------------------------------------------- 1PCS
4. Remote controller---------------------------------------------------------------------------------1PCS
Specifications
1. Frequency Bandwidth 2.97Gbps
2. Input Ports 4 x HDMI Female input ports
3. Output Ports 2 x HDMI Female output ports
4. Power Supply DC 5V 1A
5. ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
6. Dimensions (mm) 85(W) X 192 (D) X 26 (H)
3
Operation controls and Functions
Front Panel
1. ON/OFF: Power on/off switch.
2. POWER LED:This red LED illuminate when the device is connected to power & switched on.
3. IR IN: Remote control receiver.
4. OUTPUT A:Press this button to select input sources to HDMI OUT A，and the LED will
indicate the corresponding input source.
5. OUTPUT B:Press this button to select input sources to HDMI OUT B，and the LED will
indicate the corresponding input source.
4
6. EDID Selector: Select HDMI output signal format use the EDID Selector.
Number EDID Selector Video / Audio Format Number EDID Selector Video / Audio Format
1 0000 1080p / Stereo Audio 2.0 10 1001 4K2K / Stereo Audio 2.0
2 0001 1080p / Dolby/DTS 5.1 11 1010 4K2K / Dolby/DTS 5.1
3 0010 1080p / HD Audio 7.1 12 1011 4K2K / HD Audio 7.1
4 0011 1080p / Stereo Audio 2.0 13 1100 Reserve
5 0100 1080p / Dolby/DTS 5.1 14 1101 Reserve
6 0101 1080p / HD Audio 7.1 15 1110 Reserve
7 0110 3D / Stereo Audio 2.0 16 1111 Auto mode (Default)
8 0111 3D / Dolby/DTS 5.1
9 1000 3D / HD Audio 7.1
5
Rear Panel
1. HDMI OUTPUT: These sockets connect to a HDTV or monitor using HDMI cable.
2. HDMI INPUT:These sockets connect to HDMI source’s output, i.e. from DVD player, game
console, etc
3. DC IN: Plug the 5V DC power supply into the unit and connect the adaptor to AC wall outlet.
6
Application Example
7
Remote control
OUTPUT A: Press IN1\IN2\IN3\IN4 button to select input source to HDMI
OUTPUT A, and the LED will indicate the corresponding input source. Press
button OUTPUT A will cycle from input IN1\IN2\IN3\IN4.
OUTPUT B: Press IN1\IN2\IN3\IN4 button to select input source to HDMI
OUTPUT B, and the LED will indicate the corresponding input source. Press
button OUTPUT B will cycle from input IN1\IN2\IN3\IN4.
IMPORTANT:
- Never attempt to open, repair or modify any part of this unit or its accessories.
- Never get any part of the device or its accessories wet.
- Failure to adhere to these points will result in a void of warranty.
Inhaltsverzeichnis
Andere Jaycar Electronics Medienkonverter Handbücher
