JB Systems Sunbar Combi Bedienungsanleitung

ENGLISH USER MANUAL

JB SYSTEMS®1/10 SUNBAR COMBI

OPERATION MANUAL

Thank you for buying this JB SYSTEMS®product. To take full advantage of all possibilities and for your own

safety, please read these operating instructions very carefully before you start using this unit.

FEATURES

•This 2in1 bar combines narrow white beams and wide color beams in one single unit!

•7x 3W warm white LEDs with individual pixel control + 7x 9W RGB Leds.

•The perfect tool for DJs and clubs but also for use one stage!

•Different control options:

•Full DMX-control via 1, 4, 11, 12 or 17 channels.

•Many different integrated automatic programs.

•Sound activated mode with internal microphone.

•Master/slave mode for bigger setups

•Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE ! (Briteq®code: 4645)

BEFORE USE

•Before you start using this unit, please check if there’s no transportation damage. Should there be any, do

not use the device and consult your dealer first.

•Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary

for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused

by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects

or problems caused by disregarding this user manual.

•Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user

manual.

Check the contents:

Check if the packing contains the following items:

•Operating instructions

•SUNBAR COMBI

•Mains cable

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove

the top cover. No user-serviceable parts inside. Refer servicing

to qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the

use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence

of important operation and maintenance (servicing) instructions in the literature accompanying

this appliance.

This symbol means: indoor use only.

This symbol means: Read instructions.

This symbol determines: the minimum distance from lighted objects. The minimum distance

between light-output and the illuminated surface must be more than 0.1 meter.

The device is not suitable for direct mounting on normally flammable surfaces. (suitable only for

mounting on non-combustible surfaces)

ENGLISH USER MANUAL

JB SYSTEMS®2/10 SUNBAR COMBI

•To protect the environment, please try to recycle the packing material as much as possible.

•To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance or may even cause damages.

•This unit is for indoor use only.

•Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign

object enters the unit, immediately disconnect the mains power.

•Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture

must be fixed at least 50cm from surrounding walls.

•Don’t cover any ventilation openings as this may result in overheating.

•Prevent use in dusty environments and clean the unit regularly.

•Keep the unit away from children.

•Inexperienced persons should not operate this device.

•Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.

•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

•Allow the device about 10 minutes to cool down before to start servicing.

•Always unplug the unit when it is not used for a longer time or before to start servicing.

•The electrical installation should be carried out by qualified persons only, according to the regulations for

electrical and mechanical safety in your country.

•Check that the available voltage is not higher than the one stated on the unit.

•The power cord should always be in perfect condition. Switch the unit immediately off when the power cord

is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

•Never let the power-cord come into contact with other cables!

•This fixture must be earthed in order to comply with safety regulations.

•Don’t connect the unit to any dimmer pack.

•Always use an appropriate and certified safety cable when installing the unit.

•In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside.

•Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same

type and electrical specifications!

•In the event of serious operating problems, stop using the fixture and contact your dealer immediately.

•The housing and the lenses must be replaced if they are visibly damaged.

•Please use the original packing when the device is to be transported.

•Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering

from epilepsy.

CAUTION: Do not stare at operating lamp.

May be harmful to the eyes.

ENGLISH USER MANUAL

JB SYSTEMS®3/10 SUNBAR COMBI

DESCRIPTION:

1. SAFETY EYE: used to attach a safety cable when the unit is rigged, see paragraph “overhead rigging”

2. MAINS INPUT: connect the included mains cable here. You can also use any power cord with a

PowerCon connector.

3. DMX INPUT: 3pin male XLR-connector used to connect the projector with the DMX controller or with the

previous unit in the DMX chain.

4. M-DMX INPUT: Please note that this USB-connector is NOT used for updates or to connect the unit to a

PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the

(optional) WTR-DMX DONGLE from BRITEQ®and you will get wireless DMX! Moreover you will be able

to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX

function with all connected units! No extra settings to be made in the setup menu, just follow the

procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ®. The separate

WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645)

5. MICROPHONE: is used to trigger the sound controlled functions and programs

6. DISPLAY shows the various menus and the selected functions.

7. DMX OUTPUT: 3pin female XLR-connector used to connect the projector with the next unit in the DMX

chain.

8. MAINS OUTPUT: you can use this output to power the mains input of the next unit in the DMX chain (for

easier linking up to 10A). You can also use a Combi Cable to link power and DMX signal with one cable

9. FUSE HOLDER: Important: Always replace the fuse by a model with exactly the same specifications !

10. GROUND CONNECTOR: if extra grounding is required, the connection can be done here

11. MENU button: used to browse the different functions in the menu

12. UP button:to increase the values shown on the display.

13. DOWN button: to lower the values shown on the display.

14. ENTER button: used to confirm your choice or to enter the setup mode of a function

OVERHEAD RIGGING

•Important: The installation must be carried out by qualified service personal only. Improper

installation can result in serious injuries and/or damage to property. Overhead rigging requires

extensive experience! Working load limits should be respected, certified installation materials

should be used, the installed device should be inspected regularly for safety.

•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

•The device should be installed out of reach of people and outside areas where persons may walk by or be

seated.

•Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s

weight.

•Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit.

This secondary safety attachment should be installed in a way that no part of the installation can drop

more than 20cm if the main attachment fails.

•The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!

•Don’t cover any ventilation openings as this may result in overheating.

•The operator has to make sure that the safety-relating and machine-technical installations are approved by

an expert before using them for the first time. The installations should be inspected every year by a skilled

person to be sure that safety is still optimal.

ENGLISH USER MANUAL

JB SYSTEMS®4/10 SUNBAR COMBI

HOW TO SET UP AND CONTROL THE UNIT

You can operate the unit in several ways:

1) FIXED MANUAL STANDALONE MODE:

•Press the [MENU] button until the display shows [MAn].

•Press the [ENTER] button to enter the setup. The display shows [MAnu].

•Press the [ENTER] button to enter the setup.

•Use the [UP] and [DOWN] buttons to set the intensity for the white beams from [000] = off, to [255] =

Full on

•Press the [ENTER] button. [S***] (S followed by numbers) appears on the display

•Use the [UP] and [DOWN] buttons to set the strobe speed:

o[S000] = no strobe, to [S098] = Full speed strobe

o[S099] = Full ON

o[S100] = Sound controlled strobe

•Press the [ENTER] button to confirm.

•Use the [UP] and [DOWN] buttons to set the intensity for the RED color from [000] = off, to [255] = Full

•Press the [ENTER] button to confirm.

•Use the [UP] and [DOWN] buttons to set the intensity for the GREEN color from [000] = off, to [255] =

Full on

•Press the [ENTER] button to confirm.

•Use the [UP] and [DOWN] buttons to set the intensity for the BLUE color from [000] = off, to [255] = Full

•Press the [ENTER] button to confirm.

•Use the [UP] and [DOWN] buttons to set the strobe speed for the RGB led’s:

o[S000] = no strobe, to [S098] = Full speed strobe

o[S099] = Full ON

o[S100] = Sound controlled strobe

•Press the [ENTER] button to confirm

2) FULL AUTOMATIC STANDALONE MODE:

The effect automatically runs a preprogrammed sequence. Select this mode when only 1 unit is used

(standalone) or when the unit is placed as the first (master) unit in a chain with several units in

Master/Slave mode (see below).

Automatic show mode: this is how to select one of the preprogrammed shows

•Press the [MENU] button until the display shows [Aut].

•Press the [ENTER] button to enter the setup.

•Use the [UP] and [DOWN] buttons to choose the type of automatic show you would like to use:

o[CoL] = RGB Shows: select fixed colors, color fade or color chases

o[bEA] = White Beam shows: select one of the beam patterns or full on

o[Mi H] = Mixed shows: select one of the combined color + white beam shows

•Press [ENTER] to enter the setting options for this mode

•Use the [UP] and [DOWN] buttons to select one of the automatic shows

•Press the [ENTER] button to confirm.

•Use the [UP] and [DOWN] buttons to select the speed of the program (S.01 to S.99)

•Press the [ENTER] button to confirm.

3) SOUND CONTROLLED STANDALONE MODE:

The Sunbar runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1

unit is used (standalone) or when the Sunbar is placed as the first (master) unit in a chain with several

units.

•Press the [MENU] button until the display shows [Sou].

•Press the [ENTER] button to enter the setup.

•Use the [UP] and [DOWN] buttons to choose the type of automatic show you would like to use:

o[CoL] = RGB Shows: select fixed colors, color fade or color chases

o[bEA] = White Beam shows: select one of the beam patterns or full on

o[Mi H] = Mixed shows: select one of the combined color + white beam shows

ENGLISH USER MANUAL

JB SYSTEMS®5/10 SUNBAR COMBI

•Press [ENTER] to enter the setting options for this mode

•Use the [UP] and [DOWN] buttons to select one of the automatic shows

•Press the [ENTER] button to confirm.

•Use the [UP] and [DOWN] buttons to set the sensitivity of the microphone (u.01 to u.99)

•Press the [ENTER] button to confirm.

4) MASTER/SLAVE STANDALONE MODE:

When you have several SUNBAR COMBI units and you want them to all work synchronously, you can

work in the so called master/slave mode. To do this, just daisy-chain all the units (see drawing below)

•Select the desired settings for the manual, automatic or sound controlled program in this MASTER unit.

(this is the first unit in the chain, that has no controller connected to it)

•Now put all the other units in slave mode. Once this is done, the “slave” units will follow the orders of the

Master unit, so they work in perfect synchronicity.

To set a unit in slave mode:

•Press the [MENU] button until the display shows [SLA].

•Press the [ENTER] button to enter this mode.

•[SLAV] will appear on the display

•Press the [ENTER] button to confirm the slave mode.

5) CONTROLLED VIA DMX:

The unit can be controlled by any standard DMX-controller in 5 different DMX-modes: 1, 4, 11, 12 and 17

channels

•Connect the DMX input of the Sunbar to the DMX output of the previous unit in the chain or directly to

the DMX-output of your controller.

•Press the [MENU] button until the display shows: [dMH].

•Press the [ENTER] button to enter this option

•The actual DMX address is shown on the display.

•Press the [ENTER] button again

•The channel mode is shown on the display

•Use the [UP/DOWN] buttons to select the desired DMX-mode. (1Ch, 4Ch, 11Ch, 12Ch or 17Ch). See

the DMX charts below

•Press the [ENTER] button to confirm your choice.

•Now you can use the [UP/DOWN] buttons to set the DMX address. [dxxx]

•Press the [ENTER] button to confirm your choice.

Some more information on DMX512:

The DMX-protocol is a widely used high speed signal to control intelligent light

equipment. You need to “daisy chain” your DMX controller and all the connected light

effects with a good quality XLR M/F balanced cable. To prevent strange behavior of

the light effects, due to interferences, you must use a 90Ω to 120Ω terminator at the

end of the chain. Never use Y-splitter cables, this simply won’t work!

Each effect in the chain needs to have its proper starting address so it knows which commands from the

controller it has to decode.

ENGLISH USER MANUAL

JB SYSTEMS®6/10 SUNBAR COMBI

DMX Chart for the 1 channel DMX-Mode

Channel

Value

Function

CH 1

000-009

Black-Out

010-072

Color Fade (slow to fast)

073-132

Beam Show (slow to fast)

133-195

Mix Show 3 (slow to fast)

196-215

Sound Color Show

216-235

Sound Beam Show

236-255

Sound Mix Show

DMX Chart for the 4 channel DMX-Mode

Channel

Value

Function

CH 1

000-009

Black-Out

COLOR Selection

010-031

Red

032-054

Green

055-077

Yellow

078-100

Blue

101-123

Pink

124-146

Cyan

147-169

White

170-192

Pattern 1

193-215

Pattern 2

216-238

Pattern 3

239-255

Pattern 4

CH 2

000-243

Speed (slow to fast)

Color Pattern Speed

244-255

Music controlled

CH 3

000-009

Black-Out

WHITE

Pattern Selection

010-022

Pattern 1

023-035

Pattern 2

036-048

Pattern 3

049-061

Pattern 4

062-074

Pattern 5

075-087

Pattern 6

088-100

Pattern 7

101-113

Pattern 8

114-126

Pattern 9

127-139

Pattern 10

140-152

Pattern 11

153-165

Pattern 12

166-178

Pattern 13

179-191

Pattern 14

192-204

Pattern 15

205-217

Pattern 16

218-230

Pattern 17

231-255

Random Pattern

CH 4

000-243

Speed (slow to fast)

Beam Pattern Speed

244-255

Music controlled

ENGLISH USER MANUAL

JB SYSTEMS®7/10 SUNBAR COMBI

DMX Chart for the 11 channel DMX-Mode

Channel

Value

Function

CH 1

000-255

Red

Manual Color Control

CH 2

000-255

Green

CH 3

000-255

Blue

CH 4

000-255

Dimmer

CH 5

000-009

NO strobe

010-083

Strobe

084-163

Random Strobe

164-243

On-Off effect

244-255

Sound Controlled

CH 6

000-255

Beam Dimmer

Beam Control

CH 7

000-009

NO strobe

010-083

Strobe

084-163

Random Strobe

164-243

On-Off effect

244-255

Sound Controlled

CH 8

000-009

Manual Control (CH1-CH5)

COLOR

Pattern Selection

010-031

Red

032-054

Green

055-077

Yellow

078-100

Blue

101-123

Pink

124-146

Cyan

147-169

White

170-192

Pattern 1

193-215

Pattern 2

216-238

Pattern 3

239-255

Pattern 4

CH 9

000-243

Speed (slow to fast)

Color Pattern Speed

244-255

Music controlled

CH 10

000-009

Black-Out

WHITE

Pattern Selection

010-022

Pattern 1

023-035

Pattern 2

036-048

Pattern 3

049-061

Pattern 4

062-074

Pattern 5

075-087

Pattern 6

088-100

Pattern 7

101-113

Pattern 8

114-126

Pattern 9

127-139

Pattern 10

140-152

Pattern 11

153-165

Pattern 12

166-178

Pattern 13

179-191

Pattern 14

192-204

Pattern 15

205-217

Pattern 16

218-230

Pattern 17

231-255

Random Pattern

CH 11

000-243

Speed (slow to fast)

Beam Pattern Speed

244-255

Music controlled

ENGLISH USER MANUAL

JB SYSTEMS®8/10 SUNBAR COMBI

DMX Chart for the 12 channel DMX-Mode

Channel

Value

Function

CH 1

000-255

Red

RGB

CH 2

000-255

Green

CH 3

000-255

Blue

CH 4

000-255

Dimmer

CH 5

000-009

NO strobe

010-083

Strobe

084-163

Random Strobe

164-243

On-Off effect

244-255

Sound Controlled

CH 6

000-255

Dimmer LED 1

WHITE Beams

CH 7

000-255

Dimmer LED 2

CH 8

000-255

Dimmer LED 3

CH 9

000-255

Dimmer LED 4

CH 10

000-255

Dimmer LED 5

CH 11

000-255

Dimmer LED 6

CH 12

000-255

Dimmer LED 7

DMX Chart for the 17 channel DMX-Mode

Channel

Value

Function

CH 1

000-255

Red

Manual Color Control

CH 2

000-255

Green

CH 3

000-255

Blue

CH 4

000-255

Dimmer

CH 5

000-009

NO strobe

010-083

Strobe

084-163

Random Strobe

164-243

On-Off effect

244-255

Sound Controlled

CH 6

000-255

Dimmer LED 1

Beam Control

CH 7

000-255

Dimmer LED 2

CH 8

000-255

Dimmer LED 3

CH 9

000-255

Dimmer LED 4

CH 10

000-255

Dimmer LED 5

CH 11

000-255

Dimmer LED 6

CH 12

000-255

Dimmer LED 7

CH 13

000-009

NO strobe

010-083

Strobe

084-163

Random Strobe

164-243

On-Off effect

244-255

Sound Controlled

CH 14

000-009

Manual Control (CH1-CH5)

COLOR

Pattern Selection

010-031

Red

032-054

Green

055-077

Yellow

078-100

Blue

101-123

Pink

124-146

Cyan

147-169

White

170-192

Pattern 1

Inhaltsverzeichnis

Andere JB Systems DJ-Equipment Handbücher

JB Systems

JB Systems USB DERBY Bedienungsanleitung

JB Systems

JB Systems MIX6 USB Bedienungsanleitung

JB Systems

JB Systems SPYDER-RGB LASER Bedienungsanleitung

JB Systems

JB Systems LED Rave Bedienungsanleitung

JB Systems

JB Systems COB-4BAR Bedienungsanleitung

JB Systems

JB Systems YETI Installationshandbuch

JB Systems

JB Systems UV-400 Bedienungsanleitung

JB Systems

JB Systems CD 100 Bedienungsanleitung

JB Systems

JB Systems beat 6 mk2 Bedienungsanleitung

JB Systems

JB Systems INTRUDER Bedienungsanleitung

JB Systems

JB Systems SPACE-4 Mk2 LASER Bedienungsanleitung

JB Systems

JB Systems BL-B18 Bedienungsanleitung

JB Systems

JB Systems mix 3 USB Bedienungsanleitung

JB Systems

JB Systems DJ-kontrol 2 Bedienungsanleitung

JB Systems

JB Systems MCD 200 Bedienungsanleitung

JB Systems

JB Systems STRIKER Bedienungsanleitung

JB Systems

JB Systems LIVESET 2 Bedienungsanleitung

JB Systems

JB Systems PlanoSpot 7TC Bedienungsanleitung

JB Systems

JB Systems USB MUSHROOM Bedienungsanleitung

JB Systems

JB Systems MCD 150 Bedienungsanleitung

JB Systems

JB Systems Sunbar White Bedienungsanleitung

JB Systems

JB Systems RAVE SPOT Bedienungsanleitung

JB Systems

JB Systems Led Globe Bedienungsanleitung

JB Systems

JB Systems PARTY BEAMS Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung