JB Systems CMX 24 Bedienungsanleitung

User’s Guide

Mode d’emploi

Gebruiksaanwijzing

Bedienungsanleitung

Instrucciones para el uso

CMX 24 2

ENGLISH

Introduction

Congratulations on purchasing your new scene setter.

It is a microprocessor controlled system that is fully DMX-512 and

MIDI compatible. The scene setter is a 24 channel DMX-512 and

standard MIDI controller. 48 sets of programs can be programmed

in 4 pages with a total of maximum 4500 steps.

We strongly recommend that you take the time to read this manual

completly before you attempt to use the controller. We are sure

that it’s the most advanced unit for its price and it will provide you

easy operation and tremendous control power.

Technical Specifications

Power Input ....................... DC 12V-18V 500mA

DMX Output ....................... 3 pin female XLR

Midi Single ......................... 5 pin DIN

Fuse (internal).................... F 0,5A / 250V / 5x20mm

Dimensions ........................ 482 x 264 x 85 mm

Adaptor.............................. AC~230V 50 Hz, DC 12V, 500mA

......................................... AC~120V 60 Hz, DC 12V, 500mA

Weight............................... 4,8 Kg

CMX 243

FRONT PANEL

1. PRESET A LEDS

2. CHANNEL SLIDERS 1-12

These sliders will adjust the output of channel 1-12 from 0% to

100% or from 0 to 255.

3. FLASH keys 1-12

Activates the maximum output level of the selected channel.

4. PRESET B LEDS

5. SCENE LEDS

6. CHANNEL SLIDERS 13-24

These sliders will adjust the output of channel 13-24 from 0%

to 100% or from 0 to 255.

7. FLASH keys 13-24

Activates the maximum output level of the selected channel.

8. MASTER A Slider

Adjusts the output level of Master A.

9. BLIND key

When you select this key in CHASE//SCENES mode, the output

of each channel can only be controlled by de sliders or by the

FLASH keys.

10. MASTER B slider

Adjusts the output level of Master B.

11. HOME toets

When you select this key in CHASE//SCENES mode, the output

level will return from manual control (by sliders or flash keys)

to program control.

12. FADE TIME Slider

Adjusts the fade time.

13. TAP SYNC

In AUTO CHASE press it twice to define the speed of the

CHASER.

14. SPEED Slider

Adjusts the speed of the CHASER.

CMX 24 4

Controller description

CMX 245

15. FULL ON KEY

Activates the maximum output level of all channels and

disables BLACK OUT.

16. AUDIO LEVEL Slider

Adjusts the sensitivity of the audio signal.

17. BLACK OUT ey

18. STEP key

Press it once to move the program one step further.

19. AUDIO key

Press this key to go to audio control.

20. HOLD key

Press and hold the key and all output levels will remain the

same.

21. PARK

This key allows you to select SINGLE CHASE or MIX CHASE (in

CHASE//SCENES mode).

22. REC EXIT

When the Led lights up, KILL Mode is activated. When you

press a Flash key, all output levels will go to ‘0’ except the

selected channel.

23. RECORD key

Press this key to record the step in the program.

24. PAGE key

Press this key to select a Scene program in a certain page.

25. MODE SELECT

This key allows you to select CHASE//SCENES, Double Preset

or Single Preset.

26. DARK key

Press this key to pause the whole output, including Full On and

Flash.

27. ALL REV

This key allows you to change the direction of all Scene

programs.

28. 0% or 0-255 key

CMX 24 6

Press this key to select 0% or 0-255 on the display.

29. REV ONE

When you press this key and then press on one of the Preset B

keys, the direction of the selected Scene program is reversed.

30. CHASE REV

This key changes the direction of the Scene program that is

controlled by the Speed slider.

31. BEAT REV

This key changes the direction of the Scene program that is

controlled by a Beat.

REAR PANEL

1. POWER INPUT

DC 12-18V, 500 mA Min.

2. MIDI THRU

Used to transmit MIDI data received through the MIDI IN

connector.

3. MIDI OUT

Transmits data from the CMX-24 itself.

4. MIDI IN

Used to receive Midi data from an external source.

5. DMX OUT

DMX Output.

6. DMX POLARITY SELECT

Selects the polarity of the DMX output.

CMX 247

7. AUDIO INPUT

Line audio input 100mV—1Vpp.

8. REMOTE CONTROL

Full on and Black out remote control connection using 1/4"

Stereo Jack.

OPERATING INSTRUCTIONS

1. ENABLE RECORD

1) Press and hold the Record key.

2) Press Flash1, Flash 5, Flash 6 and Flash 8 in sequence.

3) Release Record, the led is lighting, recording is ready.

2. ERASE ALL PROGRAMS

1) Press and hold the Record key.

2) Press Flash 1, Flash 3, Flash 2, Flash 3 in sequence.

3) Release Record.

3. CLEAR MEMORY

1) Press the Record key and press the REC CLEAR key.

2) Release Record and Rec Clear at the same time.

4a. Record SCENE program

• Enable Record (see N° 1)

• Press MODE SELECT until the green led is on. (1-24 single/

preset park)

• Choose a page (1, 2, 3 or 4)

• Bring both MASTER faders fully up (A=open, B=closed)

• Prepare your scene, adjusting faders 1 to 24

• Press RECORD: the scene is memorised but has no number

yet

• Bring both MASTER faders fully down (A=closed, B=open)

• Press and hold RECORD

• Choose a Scene number (1 to 12) by pressing one of the

bottom FLASH buttons

• Release the RECORD button

• The SCENE is recorded

CMX 24 8

• To exit the recording mode:

1. Press RECORD, then press EXIT

2. Release both buttons at the same time.

4b. Record CHASE program

•Enable Record (see N°1)

•Press MODE SELECT until the green led is on. (1-24 single/

preset park)

•Choose a page (1, 2, 3 or 4)

•Bring both MASTER faders fully up (A=open, B=closed)

•Prepare your first scene, adjusting faders 1 to 24

•Press RECORD: the first scene is memorised

•Prepare your second scene, adjusting faders 1 to 24

•Press RECORD: the second scene is memorised

•Keep on doing this until all your chase scenes are

memorised

•Bring both MASTER faders fully down (A=closed, B=open)

•Press and hold RECORD

•Choose a Chase number (1 to 12) by pressing one of the

bottom FLASH buttons

•Release the RECORD button

•The CHASE is recorded

•To exit the recording mode:

1. Press RECORD, then press EXIT

2. Release both buttons at the same time

5. DELETE A PROGRAM

1) Press the Page key to select the desired Page Led.

2) Press the Record key and hold it, then press twice on the

Flash 16 key.

3) Release the Record key.

6. ENABLE SCENE EDIT

1) Press the Page key to select a page.

2) Press Mode Select to select Chase//Scenes.

3) Press Edit and the desired Scene Flash key.

4) Release both keys, the selected Scene Led lights up and all

the others are out. Now editing is enabled.

CMX 249

Example: Enter Scene program n°11 in Edit mode.

1) Press the Page key and select Page 1 (Led).

2) Press Mode Select and select Chase//Scenes (Led).

3) Press Edit and Flash 23.

4) Release both keys.

7. EXIT EDIT MODE

1) Press Record then press Exit.

2) Release both keys at the same time.

8. DELETE A STEP

1) In Edit Mode: press Step to start the program until you

reach the step that you want to delete.

2) Press Delete, the step is deleted.

9. ADD A STEP

1) In Edit mode: record the step that you want to add.

2) Press Step to start the program until you reach the step

where you want to insert the new step (before).

3) Press insert.

10. MODIFY A STEP

1) In Edit Mode: press Step to start the program until you

reach the step that you want to modify.

2) Press Up or Down and on the desired Flash key.

You can read the output level on the display.

3) When the level is adjusted, release the Flash key.

11. CHANGE THE DIMMER DISPLAY

1) Press and hold the Record key and press the 0% or the

0-255 key.

12. SELECT AND ACTIVATE A PROGRAM

1) Press the Mode Select key to select Chase//Scenes Led.

2) Select a Page.

3) Move Master B slider to max. position.

4) Move the slider of the desired scene to its min. position

and then move it up again. The program is selected and

activated.

13. ACTIVATE A PROGRAM WITH A REGULAR BEAT

1) Press Audio. The audio led must be off.

2) Press the Park key and select MIX mode (Led on).

3) Select a program.

4) Adjust the Speed slider or press twice on Tap Sync to

define the beat.

5) Press Rec Speed and the desired Flash key.

The program will run with the programmed beat.

14. ACTIVATE A PROGRAM WITH THE SPEED SLIDER

1) Press Audio. The audio led must be off.

2) Press the Park key and select MIX mode (Led on).

3) Select a program.

4) Move the Speed slider to Show mode position.

5) Press Rec Speed and the desired Flash key.

Example: Run Scene program n°14 with a speed of 1 step per

second and adjust it so it can be controlled with the Speed slider.

1) Press Mode Select and select Chase//Scenes (Led).

2) Press Audio (Led off).

3) Press the Park key and select the MIX mode (Led).

4) Move all sliders to minimum position.

5) Move Master B to maximum position.

6) Select Page 1 (Page 2 Led).

7) Move slider of channel 14 to maximum position.

8) Adjust the Speed slider until 1:00 appears on the display and

the Speed led lights up.

9) Press Rec Speed and Flash 14. Release both keys. Scene pro-

gram 14 is adjusted to 1 step per second.

10) Move the Speed slider to Show mode position. Press Rec Speed

and Flash 14. Scene program 14 is ready to be controlled by

the Speed slider. Move the Speed slider until 0.10 appears on

the display. Program 14 will run with 10 steps per second.

15. SPEED

A. Slowest Speed (5 min.)

1) Press the Record key and hold it.

2) Press 3 times on the 5th Flash key, release Record.

3) The 5 minutes Led lights up.

CMX 24 10

Andere Handbücher für CMX 24

Inhaltsverzeichnis

Sprachen:

Andere JB Systems Netzwerk-Router Handbücher

JB Systems

JB Systems SCANMASTER SM-1612 Bedienungsanleitung

JB Systems

JB Systems RF-DMX Converter Bedienungsanleitung

JB Systems

JB Systems TUBELED Bedienungsanleitung

JB Systems

JB Systems Scene Master Bedienungsanleitung

JB Systems

JB Systems LM 140 Bedienungsanleitung

JB Systems

JB Systems ScanMaster 1612 Bedienungsanleitung

JB Systems

JB Systems CA-32 Colormix Bedienungsanleitung

JB Systems

JB Systems CMX 24 Bedienungsanleitung

JB Systems

JB Systems Strobe Master BF-04A Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise