Jbc DDE-1B Bedienungsanleitung

English 2

Page

Two-Tool Control Unit

Ref. DDE-B

Español 12

Deutsch 22

中文 32

www.jbctools.com

Packing List

The following items should be included:

Features

Two-Tool

Control Unit .................... 1 unit

Ref. DDE-1B (120V)

DDE-2B (230V)

DDE-9B (100V)

Power Cord ..................... 1 unit

Ref. 0010569 (230V)

0013671 (100/120V)

Manual ...............................1 unit

Ref. 0016160

USB-A connector

2,8” Color TFT screen

Tilt the display

for easy reading

Two-Tool Control Unit

Ref. DDE-B

www.jbctools.com

Connections

Work simultaneously with

up to 2 tools and 1 module

+ 1 pedal for each tool

(Peripherals).

Peripherals

Stand

DDE Control Unit

RJ12 connector

for Robot system

USB-B

connector

Equipotential

connection

Power Socket

Compatibility

* The MNE Nitrogen Flow Regulator is required.

**If you need to connect the MS, MV, MN or FS modules, an adapter is required (Ref. IM2496).

Select the equipment that best suit your soldering or desoldering needs.

Basic working system Peripherals**

Control

Unit Stand Tool Cartridge

Range

MSE-A /

MVE-A MNE-A FSE-A P-005

DDE-B

AD-SD

T210-A C210

T245-A C245

T470-A C245

DN-SE

T210-NA* C210

T245-NA* C245

T470-NA*

AP-SD AP250-A C250

PA-SD PA120-A C120

HT-SD HT420-A C420

DS-SD DS360-A C360

DR-SD DR560-A C560

www.jbctools.com

350ºC

Port

Power

45%

T245

17:14

Selected 350ºC

Port

T245

17:14

Sleep

Tool in the stand

Actual Temp. 180ºC

Delay to hibernation: 29:30 Port

T245

17:14

Hibernation

Actual Temp. 25ºC

3. Hibernation

Operation

The JBC Exclusive Heating System

Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user

can work at a lower temperature and improve the quality of soldering. The tip temperature is further

reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.

1. Work 2. Sleep

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

When the tool is in the stand,

the temperature falls to the

preset sleep temperature.

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

Tools Menu:

· Set temperature limits

· Select temperature levels

Tools Menu:

· Set Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

Tools Menu:

· Set Hibernation delay

(from 0 to 60 min or no

hibernation)

Long time

in the stand

350ºC

Port

Power

45%

Temp. Levels

T245

250 350 380

17:14

Menu Options

Station

Information

Tool

in use

Work Screen

Status bar

Change

port

Displayed if

temperature

levels are

activated

Station Tools Counters

ResetGraphicsPeripherals

Press INFO for each parameter description. USB flash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

System notifications (Status Bar)

Power

indicator

The DDE offers an intuitive user interface which provides quick access to station parameters.

Original PIN: 0105

www.jbctools.com

Port 1 - T245

450

400

350

300

250

150

100

200

Power Temp

17:14

By pressing Graphics in the main MENU, temperature and power ﬁgures in real

time are displayed for each port. This helps you decide which tip to use to obtain

the best quality solder joints.

Process analysis

Graphics

Temperature

Power (%)

Export graphics

Insert a USB flash drive into the USB-A connector

to save your soldering process in csv format.

See other

port graphic

Soldering Net

Remotely manage and monitor as many stations as your PC can handle.

Functions:

- Set all the station parameters from your PC.

- Organize groups of stations and set all their parameters at the same time.

- Store specific configurations for later uses.

- Analyze the soldering graphics of the stations on your PC and export them.

1. Download the JBC Manager software and the user manual from

www.jbctools.com/manager.html

2. Connect the stations via USB-B connector and the PC will automatically detect them.

3. The notification will be displayed on the station.

any JBC

station

JBC

Manager

software

USB Hub

www.jbctools.com

1. Connect the tool to the station port by means of the CHB-A Converter.

2. Connect your Robot system to the Robot connector (RJ12) of the station.

DB9-RJ12 Adapater available only if necessary (Ref: 0013772).

3. Enable the Robot option in the station settings and the notification will be displayed:

4. Set your Robot’s commands according to the Robot Communication Protocol, available on the

website www.jbctools.com/jbcsoftware-menu-115.html

Manage and monitor the station using a Robotic system.

Working with Robots

Update the station software

1. Download the JBC Update File from

www.jbctools.com/software.html and save

it on a USB flash drive. Preferably one with no

other files.

2. Insert the USB flash drive to the station.

The icon is diplayed while updating.

Control

Unit

Robot

RS-232

connection

JBC

Update File

CHB-A

Converter

Ref. CHB-A

Maintenance

- Use a damp cloth to clean the casing and the

tool. Alcohol can only be used to clean the

metal parts.

- Periodically check that the metal parts of the

tool and stand are clean so that the station

can detect the tool status.

- Maintain tip surface clean and tinned prior to

storage in order to avoid tip oxidation.

Rusty and dirty surfaces reduce heat transfer

to the solder joint.

- Periodically check all cables and tubes.

Fuse holder

Fuse

1. Pull off the fuse holder and remove the

fuse. If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder

and replace it in the station.

- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

Clean periodically

Before carrying out maintenance or storage, always allow the equipment to cool.

- Clean the station screen with a glass cleaner or a damp cloth.

www.jbctools.com

It is imperative to follow safety guidelines to prevent electric shock, injury,

fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station

is turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Avoid the contact of flux with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

Safety

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

jbc DDE-1B Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken