Jbc DDE-B Series Bedienungsanleitung

Two-Tool Control Unit

Ref. DDE-B

Deutsch 30

Español 16

English 2

Page

www.jbctools.com

中文 44

www.jbctools.com

Two-Tool Control Unit

Ref. DDE-B

ww w.j bc to o ls .c o m

Packing List

The following items should be included:

Features

Connections

Work simultaneously with up to 2 tools and 1 module + 1 pedal for each tool (Peripherals).

PeripheralsStand

DDE Control Unit

Tool

To another peripheral

RJ12 connector

for Robot system

USB-B

connector

Equipotential

connection

Power Socket

To Pedal

Ref. P-005

Module cable

Ref. 0012709

Stand cable

Ref. 0011283

Two-Tool

Control Unit .................. 1 unit

Ref. DDE-1B (120V)

DDE-2B (230V)

DDE-9B (100V)

Power Cord ................... 1 unit

Ref. 0010569 (230V)

0013671 (100/120V)

Manual ........................... 1 unit

Ref. 0016160

USB-A connector

2,8” Color TFT screen

Tilt the display

for easy reading

2 3

www.jbctools.com

For a basic working system you need: 1 Stand, 1 Tool and 1 Cartridge or tip.

Ref. DN-SE Ref. AP-SD

Precision

Handle

Ref. T210-A

General

Purpose

Handle

Ref. T245-A

HD Handle

Ref. T470-A

Nitrogen

Handles*

Ref. T210-NA

T245-NA

T470-NA

C250C245

Solder Feed Iron

Ref. AP250-A

Ref. AD-SD

* The MNE

Nitrogen Flow

Regulator is

required to work.

C210

Ref. PA-SD Ref. DS-SDRef. HT-SD Ref. DR-SD

C120 C420 C360

Micro Tweezers

Ref. PA120-A

Thermal Tweezers

Ref. HT420-A

Micro Desoldering Iron

Ref. DS360-A

Desoldering Iron

Ref. DR560-A

C560

Stands

Tools

Cartridges C210 C245

Stands & Tools

For a basic working system you need: 1 Stand, 1 Tool and 1 Cartridge or tip.

4 5

www.jbctools.com

Peripherals

By pressing Peripherals in the main MENU, you can join tool ports with peripherals

which means each tool can work with 1 module and 1 pedal at the same time.

Fume Extractor

Switch

Ref. FSE-A

Pneumatic

Desoldering

Module

Ref. MVE-A

Electric

Desoldering

Module

Ref. MSE-A

Function: Enable/disable the module or make any tool enter Sleep or Hibernation modes.

This pedal will work with any module or tool regardless of the module to which it is connected.

If you do not have a module, you can link up the P-305 Pedal Kit to the tool port.

Pedal

Ref. P-005

Control

Unit

Nitrogen Flow

Regulator

Ref. MNE-A

Compatibility

* The MNE Nitrogen Flow Regulator is required.

Select the equipment that best suit your soldering or desoldering needs.

Basic working system Peripherals**

Control

Unit Stand Tool Cartridge

Range

MSE-A /

MVE-A MNE-A FSE-A P-005

DDE-B

AD-SD

T210-A C210

T245-A C245

T470-A C245

DN-SE

T210-NA*

T245-NA*

T470-NA*

AP-SD AP250-A C130

PA-SD PA120-A C120

HT-SD HT420-A C420

DS-SD DS360-A C360

DR-SD DR560-A C560

Pedal

Ref. P-005

Tool port

connection

Connection Box

Ref. 0012527 +

**If you need to connect the MS, MV, MN or FS modules, an adapter is required (Ref. IM2496).

P-305 Pedal Kit

By using the Connection Box, the P-005

Pedal will work with only the tool port to

which it is connected.

Function:

Makes the tool enter/skip from Sleep mode.

C245

C210

6 7

Port

T245

17:14

350ºC

Port

Power

45%

T245

17:14

Selected 350ºC

Sleep

Tool in the stand

Actual Temp. 180ºC

Delay to hibernation: 29:30

Port

T245

17:14

Hibernation

Actual Temp. 25ºC

350ºC

Port

Power

45%

Temp. Levels

T245

250 350 380

17:14

www.jbctools.com

3. Hibernation

Operation

The JBC Exclusive Heating System

Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user

can work at a lower temperature and improve the quality of soldering. The tip temperature is further

reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.

1. Work 2. Sleep

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

When the tool is in the stand,

the temperature falls to the

preset sleep temperature.

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

Tools Menu:

· Set Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

· Set Hibernation delay

(from 0 to 60 min or no

hibernation)

Tools Menu: Tools Menu:

Long time in

the stand

· Set temperature limits

· Select temperature levels

USB ﬂash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

System notifications (Status Bar)Menu Options

Station

Information

Power

indicator

Tool

in use

Work Screen

Status bar

The DDE offers an intuitive user interface which provides quick access to station parameters.

Change

port

Displayed if

temperature

levels are

activated

Station Tools Counters

ResetGraphicsPeripherals

Press INFO for each parameter description.

8 9

Port 1 - T245

450

400

350

300

250

150

100

200

Power Temp

17:14

www.jbctools.com

By pressing Graphics in the main MENU, temperature and power ﬁgures in real

time are displayed for each port. This helps you decide which tip to use to obtain

the best quality solder joints.

Process analysis

Export graphics

Insert a USB ﬂash drive into the USB-A

connector to save your soldering process in

csv format.

Graphics

Temperature

Power (%)

See other

port graphic

Soldering Net

Remotely manage and monitor as many stations as your PC can handle.

Functions:

- Set all the station parameters from your PC.

- Organize groups of stations and set all their parameters at the same time.

- Store specific configurations for later uses.

- Analyze the soldering graphics of the stations on your PC and export them.

1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html

2. Connect the stations via USB-B connector and the PC will automatically detect them.

3. The notification will be displayed on the station.

any JBC

station

JBC

Manager

software

USB Hub

10 11

www.jbctools.com

Clean periodically

Maintenance

1. Connect the tool to the station port by means of the CHB-A Converter.

2. Connect your Robot system to the Robot connector (RJ12) of the station.

DB9-RJ12 Adapater available only if necessary (Ref: 0013772).

3. Enable the Robot option in the station settings and the notification will be displayed:

4. Set your Robot’s commands according to the Robot Communication Protocol, available on the

website www.jbctools.com/jbcsoftware-menu-115.html.

Manage and monitor the station using a Robotic system.

Working with Robots

Update the station software

1. Download the JBC Update File from

www.jbctools.com/software.html and save

it on a USB flash drive. Preferably one with

no other files.

JBC

Update File

Before carrying out maintenance or storage, always allow the equipment to cool.

- Clean the station screen with a glass cleaner

or a damp cloth.

1. Pull off the fuse holder and remove the

fuse. If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder

and replace it in the station.

- Use a damp cloth to clean the casing and

the tool. Alcohol can only be used to clean

the metal parts.

- Periodically check that the metal parts of

the tool and stand are clean so that the

station can detect the tool status.

Fuse holder

- Maintain tip surface clean and tinned prior

to storage in order to avoid tip oxidation.

Rusty and dirty surfaces reduce heat

transfer to the solder joint.

- Periodically check all cables and tubes.

2. Insert the USB ﬂash drive to the station.

The icon is diplayed while updating.

Fuse

- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

Control

Unit

Robot CHB-A

Converter

Ref. CHB-A

RS-232

connection

12 13

www.jbctools.com

Safety

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station is

turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

DDE-1B 120V 50/60Hz. Input fuse: 4A. Output: 23.5V

DDE-2B 230V 50/60Hz. Input fuse: 2A. Output: 23.5V

DDE-9B 100V 50/60Hz. Input fuse: 5A. Output: 23.5V

- Weight: 4.3 Kg (9.3 lb)

- Dimensions: 148 x 120 x 232 mm

- Output Peak Power: 150W per tool

- Temperature Range: 90-450 °C (90-840 ºF)

- Idle Temp. Stability (still air) ±1.5 ºC (±3 ºF)

- Tip to ground resistance: <2 ohms

- Tip to ground voltage: <2mV RMS

- Ambient Operating Temperature: 10-40 ºC (50-104 ºF)

- USB-A / USB-B / Peripherals connectors

- RJ12 connector for Robot

Complies with CE standards

ESD protected housing “skin effect”

Specifications

14 15

www.jbctools.com

Conector USB-A

Pantalla color TFT de 2,8”

Incline la pantalla

para una mejor

lectura

Composición

Los siguientes artículos deben estar incluidos:

Características

Conexiones

Trabaje simultáneamente con hasta 2 herramientas y 1 módulo + 1 pedal para cada una (periféricos).

PeriféricosSoporte

Unidad de Control

Herramienta

A otro periférico

Conector RJ12 para

sistemas de robot

Conector USB-B

Toma de red

Al Pedal

Ref. P-005

Cable del módulo

Ref. 0012709

Two-Tool Control Unit

Ref. DDE-B

ww w.j bc to o ls .c o m

Two-Tool Control Unit

Unidad de control de 2

herramientas ............ 1 unidad

Ref. DDE-1B (120V)

DDE-2B (230V)

DDE-9B (100V)

Power Cord

Cable de red ............. 1 unidad

Ref. 0010569 (230V)

0013671 (100/120V)

Manual ..................... 1 unidad

Ref. 0016160

16 17

Conexión equipotencial

www.jbctools.com

Ref. DN-SE Ref. AP-SD

Mango para

aplicaciones de

precisión

Ref. T210-A

Mango para

aplicaciones

generales

Ref. T245-A

Mango HD

Ref. T470-A

Mangos con aporte

de nitrógeno*

Ref. T210-NA

T245-NA

T470-NA

C250C245

Soldador con

aportación de

estaño

Ref. AP250-A

Ref. AD-SD

* Se requiere

el Regulador

de Caudal de

Nitrógeno MNE.

C210

Ref. PA-SD Ref. DS-SDRef. HT-SD Ref. DR-SD

C120 C420 C360

Micro Pinza

Ref. PA120-A

Pinza para usos

generales

Ref. HT420-A

Micro Desoldador

Ref. DS360-A

Desoldador

Ref. DR560-A

C560

Soportes

Herramientas

Cartuchos

o puntas

C210 C245

Soportes y Herramientas

Para un sistema básico de trabajo usted necesita: 1 soporte, 1 herramienta y 1 cartucho o punta.

18 19

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

jbc DDE-B Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken