Jbc NAU Bedienungsanleitung

INSTRUCTION MANUAL

NAU

Nano Control Unit

Allen Key 1.5 mm ......... 1 unit

Ref. 0009848

Manual ............................ 1 unit

Ref. 0028953

Metal Brush ............................................... 1 unit

Ref. CL2466

Brass Wool ................................................. 1 unit

Ref. CL6210

Nano Control Unit ..................................... 1 unit Cable Collector and Stand .................. 2 units

Ref. CC2002

Packing List

The following items are included:

This manual corresponds to the following references:

- NAE-9C (100V)

- NAE-1C (120V)

- NAE-2C (230V)

Power Cable .................. 1 unit

Ref. 0024092 (100V)

0023715 (120V)

0023714 (230V)

Tip Aligner

* not included, sold separately

Power Socket

Main Switch

Pedal Connectors

To Nano Tool

Nano Handle*

Ref. N T115 - A

Adjustable

Nano Tweezers*

Ref. A N115 - A

Features and Connections

Tool extension cord (1m)*

Ref. A1205

Accessorie:

Process

Screen:

2.8 Color TFT

Cartridge Extractor

Brass wool

Metal brush

Stand:

Intelligent Heat

Management

Cable collector

To Nano Tool

Equipotential

Connector

USB-B

Connector

RJ12

Connector

for Robot

USB-A

Connector

NAU

Control Unit

PORT

ROBOT

PEDAL

NAU

Control Unit

PORT

ROBOT

PEDAL

Tool Stand Assembly

Tool Stand Replacement

Insert the new tool stand (3) and tighten the

screw (4).

Loosen the screw (1) and withdraw the tool

stand (2).

Menu Options

Station Tools Counters

ResetLanguagePeripherals

Set the station

parameters

Set the tool

parameters

Consult / modify the

links of the peripherals

connected to the

station with the port

they are connected to.

Display the hours

worked in each cycle

It is possible to

choose the language

from a list.

Allows you to carry

out an overall station

reset restoring all the

parameters to their

default values.

Station troubleshooting available on the product page at www.jbctools.com

Troubleshooting

350ºC

Port

Power

45%

Temp. Levels

250 350 380

17:14

NT115

Station

Information

Change

port

Power

indicator

Tool

in use

Work Screen

Status Bar

NAS offers an intuitive user interface which provides quick access to station parameters.

Default PIN: 0105

Displayed if

temperature

levels are

activated

Export graphics

Insert a USB flash drive into the

USB-A connector to save your

soldering process in csv format.

Proﬁles

Advanced Functionalities

It provides detailed graphics of tip temperature and power delivery in real time during

solder joint formation for analysis purposes. This helps you decide how to adjust your

process or which tip to use to obtain the best quality soldering.

Graphics

Get greater quality and control in your production.

Manage your whole soldering process remotely in real time.

For more information see www.jbctools.com/webmanager.html.

Designed to avoid thermal shock when soldering Ceramic Chip components like

MLCC, this new and unique feature allows controlling the heating ramp up rate of the

tool to gradually increase the temperature of the component through all the phases of

the soldering process. Up to 25 fully conﬁgurable soldering proﬁles can be stored.

System Notifications

The following icons will be displayed on the screen’s status bar.

Station update

Download the JBC Update File from

www.jbctools.com/software.html

Insert the USB flash drive with the

file downloaded to the station.

Files

Update

USB ﬂash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot. down-

loaded to the station.

Station software update. Press INFO to

start the process.

Warning. Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

JBC Net

NAU

Control Unit

PORT

ROBOT

PEDAL

PORT

PEDAL

17:14

Hibernation

Actual Temp. 25ºC

Port

350ºC

Port

Power

45%

17:14

Selected 350ºC

NT115 NT115

Operation

JBC’s Exclusive Heating System

2. Hibernation1. Work

When the tool is lifted from the holder the tip

will heat up to the selected temperature.

When the tool is in the holder, the power

is cut off and the tool cools down to room

temperature.

Tool Me nu:

· Set temperature limits

· Set temperature levels

Tool Me nu:

· Set Hibernation delay

(from 0 to 60 min or no Hibernation)

This revolutionary technology is able to recover tip temperature extremely quickly.

This allows the user to work at a lower temperature.

As a result, tip life increases by 5.

ROBOT

Chip Components Rework Process using Tweezers*1and Pedal*1

Pedal*1

Ref. P-405

The Adjustable Nano Tweezers is the most effective tool for desoldering chip components but also it

facilitates its rapid placement and soldering by using the P-405 pedal connected to the station.

Connections

Connect pedal P405*1to the same port where the Nano

Tweezers*1are connected.

In the peripherals menu for the Pedal Activation Mode

choose between “pressed” and “released”.

Lift the tweezers from the holder, press and hold the pedal

to activate the tool and desolder the component.

Once the pedal is released the tool enters en Hibernation

Mode and cools down.

Desoldering*2

*1not included, sold separately

2previously Press Mode selected

Adjustable

Nano Tweezers*1

Ref. A N115 - A

Manual Solder Paste

Dispenser*

Ref. DPM-B

Clean the pads with the desoldering tool

DS360*.

For this operation JBCs desoldering station* is

needed.

Apply the solder paste amount needed to

solder the new chip component.

The use of JBC´s DPM Manual Solder Paste

Dispenser* is recommended.

Pad Cleaning

Solder Paste Dispensing

*not included, sold separately

Placing*

Do not press the pedal.

Use the tweezers to position the component on the

previously tinned pad.

Note: The inactive tool prevents the component from

heating up prematurely.

Soldering*

Once in position press and hold the pedal to activate the

tweezers and perform the soldering.

*previously Press Mode selected

Andere Handbücher für NAU

Inhaltsverzeichnis

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

jbc NAU Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken