Jbc CL9885 Bedienungsanleitung

Reference Guide

STANDS

www.jbctools.com

2

STANDS

For HT-A hot tweezers.

HT-SB

Fo r T245-A an d T210-A

soldering handpiece.

For micro hot tweezers.

PA-SB

For solder feed iron.

AP-SB

AP-SB

For desoldering iron.

DR-SB

For micro desoldering iron.

DS-SB

All these stands can be connected to the following JBC stations: DI, DD, DM and RM.

3

CL9885 TIP CLEANING STAND

The most complete cleaning accessory, allowing you to choose between 3 different cleaning methods:

metallic wool, metal brush and sponge. Use the integrated wiper to remove excess solder from the tip, you

can tap the tip on the wiper proﬁle or you can wipe any possible particle stuck to the tip using the slots.

Due to its weight and antislip bumpers, it is totally self contained, portable and ideal 1 for handed use, there

is no need to hold with a hand while you are cleaning the tip

CL0236 WIPER

S0354 SPONGE

CL6210 BRASS WOOL

CL6220 Brushes TT-A Tip TinnerCL6205 Inox wool

OPTIONAL

4

Assembly for AD, AP, PA, HT stands.

Assembly for DR and DS stands.

CABLE COLLECTOR ASSEMBLY

STANDS

5

2 - Insert the cartridge to be used

into the handpiece, push slightly

and remove it from the slot.

With the JBC system, the cartridge can be changed quickly, without turning off the station, so you have multiple soldering

irons in one.

1- Insert the cartridge connected to

the handpiece in a slot and pull

up slightly to release it.

3 - Press the cartridge into the

suitable hole depending on the

tip’s shape.

Important.

It is essential to insert the cartridge till the end for a good connection.

Use the mark as reference. Alignment

CHANGING THE HADPIECE CARTRIDGE

6

CABLE STAND AND SUCTION TUBE EXTENSIONS

Stand cable extension

Ref. A1286

Lenght: 1.5 m

Suction tube

extension kit

Ref. A1287

Lenght: 1.5 m

STANDS

7

WARRANTY

The JBC 2 years warranty, guarantees this equipment against all

manufacturing defects, covering the replacement of defective parts

and all necessary labour.

Warranty does not cover product wear due to use or mis-use.

In order for the warranty to be valid, equipment must be returned,

postage paid, to the dealer where it was purchased enclosing this,

fully ﬁlled in, sheet.

SERIAL Nº

STAMP OF DEALER

DATE OF PURCHASE

0003790-0311

This product should not be

thrown in the garbage.

MORE INFORMATION

www.jbctools.com

Andere Handbücher für CL9885

3

Dieses Handbuch passt für folgende Modelle

5

Inhaltsverzeichnis

Beliebte Zubehör für Elektrowerkzeuge Handbücher anderer Marken

Bosch

Bosch OSC004 Bedienungsanleitung

Rockler

Rockler 57510 Bedienungsanleitung

Bosch

Bosch RA1054 Montageanleitung

Grizzly

Grizzly T10808 Bedienungsanleitung

Kitagawa

Kitagawa SC N Series Bedienungsanleitung

Wolfcraft

Wolfcraft FKS 145 Kurzanleitung

ADAMAS

ADAMAS B32 Bedienungsanleitung

STEINEL PROFESSIONAL

STEINEL PROFESSIONAL 4007841009595 Bedienungsanleitung

Echo

Echo Speed-Feed Universal 400 LH/RH Bedienungsanleitung

SCHUNK

SCHUNK ROTA TB-TBS-EP Gebrauchsanweisung

Schmid

Schmid RAPID Secure XL Bedienungsanleitung

Drill Master

Drill Master 360X Bedienungsanleitung

Toro

Toro 138-5050 Bedienungsanleitung

Bosch

Bosch GTA 3800 Professional Montageanleitung

RG AVAK

RG AVAK MaxDrill Series Bedienungsanleitung

infaco

infaco PW3 Bedienungsanleitung

Gloria

Gloria CUT & BRUSH Bedienungsanleitung

Bench Dogs

Bench Dogs Quad MFT Hinge System Bedienungsanleitung