jbc WS-A Bedienungsanleitung
INSTRUCTION MANUAL
High-Temperature
Wire Stripper
Ref. WS-A
INSTRUCTION MANUAL
www.jbctools.com
1. Packing List ....................................................................................................................... 3
2. Safety ................................................................................................................................ 4
3. Features & Connections ................................................................................................. 5
4. Changing Cartridges ....................................................................................................... 6
5. Cartridge Range ............................................................................................................... 6
6. Adjustable Strip Gauge ................................................................................................... 7
7. Operation ........................................................................................................................... 8-10
8. Control Process ................................................................................................................ 11
9. Maintenance ...................................................................................................................... 12
10. Notes ................................................................................................................................ 13
10. Specifications .................................................................................................................. 14-15
Index
Page
2
Ref. WS-A
INSTRUCTION MANUAL
www.jbctools.com
Manual ............. 1 unit
Ref. 0022824
Packing List
The following items are included:
WS Control Unit ...............1 unit
Ref. WS-1A (120V)
WS-2A (230V)
Stand ..................................1 unit
Ref. WS-SA
High Temperature
Stripper Tweezers.........1 unit
Ref. WS440-A
High-Temperature
Wire Stripper
Ref. WS-A
Metal Brush.......................1 unit
Ref. 0022793
Power Cord ......................1 unit
Ref. 0009417 (100V/120V)
0009401 (230V)
Stand cable ................... 1 unit
R ef. 0 01128 3
Cartridge Holder .............1 unit
Ref. SCH-A
INSTRUCTION MANUAL
www.jbctools.com
3
www.jbctools.com
Safety
Warning
- Do not touch the blade or the metal parts arround.
- Do not allow the blade be close to flammable materials.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- This appliance can be used by children over the age of eight and also persons with reduced physi-
cal, sensory or mental capabilities or lack of experience provided that they have been given adequa-
te supervision or instruction concerning use of the appliance and understand the hazards involved.
- Maintenance must not be carried out by children unless supervised.
- Place the tool on the stand when is not in use.
- Turn off the power when not in use, changing parts or storing.
Caution
- Do not use the Wire Stripper for other applications than wire stripping.
- Do not modify or customize the Wire Stripper.
- Do not hit the blade against workbench to eliminate stripped insulation debris, This behavior
would damage the blade.
- Remove power from the tool by holding the plug, not the wires.
- Be careful with the fumes produced when stripping. We recomend to use our fume extractor.
4
Features & Connections
Power Socket
WS Control Unit
Stand
Ref. WS-SA
Stand cable
Ref. 0 0 1128 3
Equipotential connector
USB Connector
Main switch
Fuse
High-Temperature Wire
Strippers Tweezers
Ref. WS440-A
W440 Cartridges
(Required but not
supplied)
www.jbctools.com
5
26
30
28
AWG
32
36
24
AWG
26
28
WARNING: It is esential to tighten this screw
for the tool to function.
Cartridge electric
connection screw
Alignment
Important: It is esential to insert the cartridge
till the end for a good connection.
Take the mark as reference and check that
both tips of the tweezer match.
Changing Blande Cartridges
Cartridge Range
W440 blade cartridges, due to its design, has a proper centering to ensure a good
functionality. Before tightening the screw, fix the cartridges in working position.
Blade Cartridges alignment
W440-023 W440-025
The WS440-A works with W440 blade cartridges. Find the model that best suits your soldering needs
on www.jbctools.com.
Flat Blade (no holes)
Ref. W440-021
20
24
22
18
(mm)
(0.405)
(0.255)
(0.321)
(0.202)
(0.127)
(0.511)
(mm)
(0.812)
(0.511)
(0.644)
(0.405)
(0.321)
(1.020)
6
Adjustable Strip Gauge
Adjust the strip gauge according to your stripping requirements.
Strip Gauge Knob Strip Gauge
www.jbctools.com
7
Operation
The WS incorporates predeterminated power levels and it also feature a customized working
mode. It allows you to work on wire insulations made of thermoplastics and thermostable
materials such as teflon*, kapton*, silicone, rubber, etc.
Programs included:
Insulation Material Symbol Power Level
Polyvinyl Chloride PVC 6%
Polyethylene PE 7%
Nylon PA 10%
Kynar ² PVDF 16%
Tefzel ¹ ETFE 17%
Teflon ¹
FEP 16%
PFA 21%
PTFE 40%
Ethylene Propylene
Rubber EPM/EPR 44%
Silicone Rubber SI 51%
Kapton ¹ PI 90%
ThermoplasticsThermostable
¹ Registred Trade Marks of DuPont
² Registred Trade Marks of Arkema
8
Selected temp.
560
o
C
Power 75%
Kapton
®
PI
90%
Power 59%
Custom 68%
1. Select Material Mode
How to Operate
After switching on the power, firstly you
have to select the working mode. Press the
screen buttons UP and DOWN to chose
between all the materials.
If you want to work on a customized
mode, press OK and then use the UP and
DOWN buttons to set up your own power
configuration.
2. Custom Mode
Down
Button
Up
Button
OK
Button
www.jbctools.com
9
Power 75%
Kapton
®
PI
90%
Power 35%
Kapton
®
Sleep
90%
PI
Power 0%
Kapton
Hibernation
90%
PI
®
Once you choose any Operation Mode, you are able to begin the working process.
· Set Sleep delay
(from 0 to 9 min or no Sleep)
· Change Hibernation delay
(from 0 to 60 min or no
hibernation)
1. Work 2. Sleep 3. Hibernation
When the tweezer is lifted
from the stand the tip will heat
up to the selected material
configuration.
When the tweezeer is in the
stand, the power falls after a
specified time.
After longer periods of
inactivity, the power is cut off
and the tool cools down to
room temperature.
· Select material power level
10
Inhaltsverzeichnis
Andere jbc Elektrowerkzeuge Handbücher
jbc
jbc NT105 Bedienungsanleitung
jbc
jbc DR5500 Bedienungsanleitung
jbc
jbc MSE-A Bedienungsanleitung
jbc
jbc JT-D Series Bedienungsanleitung
jbc
jbc AT420-A Bedienungsanleitung
jbc
jbc AD 8211 Bedienungsanleitung
jbc
jbc advanced Series Bedienungsanleitung
jbc
jbc DS360 Bedienungsanleitung
jbc
jbc advanced Series Bedienungsanleitung
jbc
jbc DSS-D Bedienungsanleitung
jbc
jbc DR560-A Bedienungsanleitung
jbc
jbc CS-F Series Bedienungsanleitung
jbc
jbc ALE250 Bedienungsanleitung
jbc
jbc DR560-A Bedienungsanleitung
jbc
jbc advanced Series Bedienungsanleitung
jbc
jbc T210 Series Bedienungsanleitung
jbc
jbc TRA245 Bedienungsanleitung
jbc
jbc MD 2960 Bedienungsanleitung
jbc
jbc T210 Series Bedienungsanleitung
jbc
jbc AP250 Bedienungsanleitung
