jcb JCB-SS280 Bedienungsanleitung
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
Safety and operating manual
1/3 Sheet Sander
JCB-SS280
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
The term "power tool" in the
warnings refers to your electric
(corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well
lit.
Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Power tools create
sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2. Electrical safety
a) Power tool plugs must match
the outlet. Never modify the plug
in any way. Do not use any adapter
plugs with grounded power tools.
Unmodified plugs and matching
outlets will reduce risk of electric
shock.
b) Avoid body contact with
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of
electric shock if your body is
grounded.
c) Do not expose power tools
to rain or wet conditions.
Water
entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.
Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of
a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply.
Use of an RCD
reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while
GENERAL POWER TOOL SAFETY WARNINGS
ORIGINAL INSTRUCTIONS
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
operating power tools may result
in serious personal injury.
b) Use personal protective
equipment. Always wear eye
protection.
Protective equipment
such as dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal
injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your
finger on the switch or energising
power tools that have the switch
on invites accidents.
d) Remove any adjusting key or
wrench before turning the power
tool on.
A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
e) Do not overreach. Keep proper
footing and balance at all times.
This enables better control of
the power tool in unexpected
situations.
f) Dress properly. Do not wear
loose clothing or jewellery. Keep
your hair, clothing and gloves
away from moving parts.
Loose
clothes, jewellery or long hair can
be caught in moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
4. Power tool use and care
a) Do not force the power tool.
Use the correct power tool for
your application.
The correct
power tool will do the job better
and safer at the rate for which it
was designed.
b) Do not use the power tool if
the switch does not turn it on and
off.
Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from
the power source and/or the
battery pack from the power tool
before making any adjustments,
changing accessories, or storing
power tools.
Such preventive
safety measures reduce the
risk of starting the power tool
accidentally.
d) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool.
Power
tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
If damaged, have the power
tool repaired before use.
Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and
clean.
Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier
to control.
g) Use the power tool,
accessories and tool bits
etc. in accordance with these
instructions, taking into account
the working conditions and the
work to be performed.
Use of the
power tool for operations different
from those intended could result
in a hazardous situation.
5. Service
a) Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
SYMBOLS
To reduce the risk of injury, user must read
instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
1. ON-OFF SWITCH
2. LOCK-ON BUTTON
3. SOFT GRIP HANDLE
4. CYCLONIC DUST BOX
5. VARIABLE SPEED CONTROL
6. BASE PLATE
7. PAPER PUNCH
8. CLAMP LEVER
9. SANDING PAPER CLAMP
10. MOTOR HOUSING
11. SANDING PAPER (MESH SANDING SHEET)* (See A1.A2)
COMPONENT LIST
*
Not all the accessories illustrated or described are included in standard
delivery.
10
7
9
4
321
5
6
8
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
TECHNICAL DATA
Voltage 230-240V~50Hz
Power input 280W
No load speed 6000-12000/min
Base size 92x187mm
Orbital diameter 2.4mm
Protection class /II
Machine weight 1.8kg
NOISE INFORMATION
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value ah= 5,52m/s²
Uncertainty K =1.5m/s²
A weighted sound pressure LpA: 83dB(A)
A weighted sound power LwA : 94dB(A)
KpA& KwA=3.0dB(A)
Wear ear protection when sound pressure is over: 80dB(A)
- The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another;
- The declared vibration total value may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10oC or less.
Plan your work schedule to spread any high vibration tool use across a number of
days.
ACCESSORIES
We recommend that you purchase your accessories from the same store that
sold you the tool. Use good quality accessories marked with a well-known brand
name. Choose the type according to the work you intend to undertake. Refer to the
accessory packaging for further details. Store personnel can assist you and offer
advice.
Mesh sanding sheet(80 grit) 3
Cyclonic dust box 1
Vacuum adaptor 1
Paper punch 1
JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
NOTE:
Before using the tool,
read the safety and operating
manual carefully.
INTENDED USE
The machine is intended for dry
sanding of wood, plastic, filler and
coated surfaces.
ASSEMBLY
1. FIT THE SANDING PAPER
A) MESH SANDING SHEET (WITH
HOOK & LOOP SYSTEM)(See A1)
The mesh sanding sheet are placed
directly onto the base plate. Before
placing on the mesh sanding sheet,
free the base plate from dust/debris
by lightly tapping against it.
B) SANDING PAPER WITHOUT
HOOK & LOOP SYSTEM (SEE A2)
Lightly lift the clamp lever (8) and
unlatch it.
Slide the sanding paper under the
sand paper clamp lever and reinsert
the clamp lever (8).
Make sure that the sanding paper
faces firmly against the base plate.
Fold the sanding paper around and
clamp the other end in the same
manner.
Sanding paper without holes, e. g.
from rolls or by the meter, can be
punctured with the paper punch for
use with dust extraction.
OPERATING INSTRUCTIONS
A2
11
1
2
A1
11
C5
B1 2
D
E2
E1
Andere Handbücher für JCB-SS280
1
Inhaltsverzeichnis
Andere jcb Sander Handbücher
jcb
jcb JCB-SS360 Installationshandbuch
jcb
jcb JCB-20OS Planungshandbuch
jcb
jcb JCB-BS950 Installationshandbuch
jcb
jcb JCB-SS240 Installationshandbuch
jcb
jcb JCB-ROS330 Installationshandbuch
jcb
jcb JCB-ROS330 Installationshandbuch
jcb
jcb JCB-RO125 Planungshandbuch
jcb
jcb 21-RO125 Bedienungsanleitung
jcb
jcb JCB-SS280 Installationshandbuch
