Jensen JTA-420 Bedienungsanleitung

PORTABLE 3-SPEED STEREO TURNTABLE

WITH BUILT-IN SPEAKERS

USER MANUAL

JTA-420

PLEASE READ THIS USER MANUAL AND

SOFTWARE GUIDE COMPLETELY BEFORE OPERATING THIS

UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE

BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO

PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with these

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments / accessories specified by the manufacturer.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead

symbol, within an equilateral triangel is

intended to alert the user to the presence

of uninsulated dangerous voltage

within the product is endosure that may

be of sufficient magnitude to constitute

risk of electric shock to persons

CAUTION: TO REDUCE THE RISK

OF ELECTRICSHOCK, DO NOT

REMOVE COVER (OR BACK). HO

USER-SERVOCEABLE PARTS

INSIDE. REFERSERVICING TO

QUALIFIED SERVICE PERSONEL.

The exclamation point within an

equilateral triangel is intended to

alert the user to the presence of

important operating and

maintenance (servicing) instructions

in the literature accomoanying the

appliance

11. Unplug this apparatus during lightning storms or when unused for long periods

of time.

12. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

13. This appliance shall not be exposed to dripping or splashing water and that no

object filled with liquids such as vases shall be placed on the apparatus.

14. Do not overload wall outlet. Use only power source as indicated.

15. Do not attempt to dismantle, open or repair this product yourself. If a fault

occurs, seek advice from your local qualified service technician or contact

the distributor via the telephone number at the back of this instruction

manual.

16. Caution marking and nameplate are located on back of product.

PRECAUTION FORE USE

UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.

DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE

MAINS VOLTAGE AND ALL OTHER CONNECTIONS HAVE BEEN MADE.

DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE

OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION.

IMPORTANT NOTES

Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat radiating appliances such as

electric heaters.

Places subject to constant vibration.

Dusty, humid or moist places.

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party

s authority to responsible for compliance could void the user

operate the equipment.

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber 'feet' to prevent the product from

moving when you operate the controls. These 'feet' are made from non-migrating

rubber material specially formulated to avoid leaving any marks or stains on your

furniture. However certain types of oil based furniture polishes, wood

preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave

marks or a rubber residue on the furnit ure. To prevent any damage to your

furniture we strongly recommend that you purchase small self-adhesive felt pads,

available at hardware stores and home improvement centers everywhere, and

apply these pads to the bottom of the rubber 'feet' before you place the product on

fine wooden furniture.

ACCESSORIES INCLUDED

- Application C D

- USB c able

- AUX IN Cable

- User M anual

LOCATION OF CONTROLS

1. Phonograph Lid

2. Phonograph Lid Support Hinge

3. Power On/OFF and Volume Control Rotary Switch

4. Speakers

5. Handle

6. Turntable

7. 45 RPM Record Adaptor

8. Transit Screw

9. Cue Lever

10. 33/45/78RPM Speed Selector

11. Tone Arm Rest/Holder

12. Tone Arm with Stylus

13. USB Port For Computer Connection

14. AUX IN Jack

15. Phonograph/AUX mode selector

16. Line Out Socket (L/R)

17. AC IN jack

13 14 15 16 17

GETTING STARTED

IMPORTANT!!

TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION,

A SILVER TRANSIT SCREW IS LOCATED AT THE UPPER RIGHT OF THE

TURNTABLE PLATFORM.

BEFORE PLAYING, PLEASE USE A SCREW DRIVER TO

TURN THE TRANSIT SCREW IN CLOCKWISE DIRECTION

(SCREW GOING DOWN) COMPLETELY TO UNLOCK THE

TURNTABLE

TO LOCK THE TURNTABLE AGAIN FOR TRANSPOTATION, PLEASE TURN

THE SCREW IN COUNTER-CLOCKWISE DIRECTION.

4. Remove the twist-tie that was used to

secure the tone arm during shipment.

5. Release the tone arm lock lever.

3. Remove the opaque white plastic stylus cover from the

phonograph stylus by sliding it in the direction of the

arrow. Discard the stylus cover.

STEREO PHONOGRAPH OPERATION

Please Note - Before Use

- Remove the stylus protector.

- Make sure that the tone arm is unlocked and free to move

from the tone arm rest prior to operating. Lock the tone arm

again when not in use.

1. Set the PHONO/AUX mode selector lo cated on the back of the unit to PHONO

position.

2. Raise the phonograph lid and securely lock the hinge.

3. Place the record on the platter (use the 45 RPM record adaptor if you are

playing 45 RPM records).

4. Set the speed selector to the proper position for the

record you are playing.

5. Rotate the Power ON/OFF knob to turn on the system.

6. Raise the CUE lever to lift the tone arm off its rest.

Slowly move it over the record, the platter will begin spinning.

7. Use the CUE lever to gently lower the tone arm onto the record in the location

that you want to play.

8. Adjust the volume to a desired level.

9. At the end of record, the tone arm will automatically return to the tone arm rest,

the platter will automatically stop spinning.

10. To stop playing manually, lift the CUE level to lift the tone arm from the record,

manually return the tone arm to its rest and lower the CUE lever.

NOTE:

1). Do not turn or stop the turntable manually. Moving or jarring the Turntable

without securing the Tone Arm clamp could result in damage to the Tone Arm.

2). Some types of 45 & 78 RPM records may have an auto-stop area outside the

preset limit, so the tone arm may automat ically return before the last track

finishes.

AUXILIARY INPUT

This unit provides an auxiliary audio signal input jack for connecting external audio

devices like MP3 players, CD players and older, non-dockable iPods (except iPod

shuffle 3rd gen) so you can listen to your external source through the speakers of

this system.

Cartrige

Stylus Assembly

Inhaltsverzeichnis

Andere Jensen Drehscheibe Handbücher

Jensen

Jensen JTA-410 Bedienungsanleitung

Jensen

Jensen JTA-220 Bedienungsanleitung

Jensen

Jensen JTA-230R Bedienungsanleitung

Jensen

Jensen JTA-475 Bedienungsanleitung

Jensen

Jensen JTA-222 Bedienungsanleitung

Jensen

Jensen JMC-1250 Bedienungsanleitung

Jensen

Jensen JTA-470 Bedienungsanleitung

Jensen

Jensen JTA-232 Bedienungsanleitung

Jensen

Jensen JTA-575 Bedienungsanleitung

Jensen

Jensen JTA-300 Bedienungsanleitung

Jensen

Jensen JTA-215 Bedienungsanleitung

Jensen

Jensen JTA-380 Bedienungsanleitung

Jensen

Jensen JTA-475 Bedienungsanleitung

Jensen

Jensen JDVD1500 Bedienungsanleitung

Jensen

Jensen JTA-325 Bedienungsanleitung

Jensen

Jensen JTA-230 Bedienungsanleitung

Jensen

Jensen JTA-990 Bedienungsanleitung

Jensen

Jensen JTA-245 Bedienungsanleitung

Jensen

Jensen JTA-325BTW Bedienungsanleitung

Jensen

Jensen JTA-450 Bedienungsanleitung

Jensen

Jensen JTA-222 Bedienungsanleitung

Jensen

Jensen JTA-455 Bedienungsanleitung

Jensen

Jensen JTA-220A Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung