JL Audio Stealthbox SB-T-TACDCG3/10TW3 Bedienungsanleitung

INSTALLATION GUIDE

for the

SB-T-TACDCG3/10TW3

SKU# 94654

2016 & Up Toyota Tacoma Double Cab

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox®be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULTY:

ESTIMATED TIME:

1 HOUR

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

Continued on Next Page

OUT

SB-T-TACDCG3/10TW3 INSTR_SKU# 011495

INCLUDED HARDWARE

Continued on Next Page

Page 2 • JL Audio, Inc., 2017

SB-T-TACDCG3/10TW3 INSTR_SKU# 011495

BOM ID Qty SKU Description

1 2 151329 3/4” OD x 3/8” ID x 3/8” Spacer

2 2 153676 L-Bracket

3 2 151137 1/4 - 20 x 1” Hex Bolt

4 4 151098 1/4” Split Lock Washer

5 4 150485 1/4” Flat Washer

6 2 151359 M6-1 x 30mm Hex Head Screw

POWER RECOMMENDATION

JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

Rem. |Oset | Signal

Input Voltage

Low | High

Turn-On Mode

Monoblock Subwoofer Amplifier

CONNECTIONS

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for

both channels of the amplier. JL Audio recommends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.

Continued on Next Page

Page 3 • JL Audio, Inc., 2017

SB-T-TACDCG3/10TW3 INSTR_SKU# 011495

Page 4 • JL Audio, Inc., 2017 Continued on Next Page

STEP 8

Remove the factory bolt from the back of the

storage pocket on each side of the enclosure.

These will not be reinstalled.

STEP 7

Connect the speaker cable to the terminal cup

on the side of the enclosure, and place the

Stealthbox® into position, as shown.

STEP 6

Route speaker cable to the inner side of the

storage pocket.

STEP 5

Locate the small, plastic tab in the center of the

storage pocket floor. Using a razor knife,

carefully remove the tab.

STEP 4

Fold the passenger side seat back down to

access the rear storage pocket.

STEP 3

Remove the two headrests on the passenger

side seat back.

STEP 2

Fold the passenger side seat bottom forward.

STEP 1

Empty the rear seat area.

SB-T-TACDCG3/10TW3 INSTR_SKU# 011495

Page 5 • JL Audio, Inc., 2017

MID/HIGH FREQUENCY DRIVER FITMENT

A variety of JL Audio coaxial and component systems will t in the factory speaker locations of you vehicle.

CONGRATULATIONS!

You have completed the installation for this model! Enjoy your new Stealthbox®!

SB-T-TACDCG3/10TW3 INSTR_SKU# 011495

STEP 12

Fold the seat back up, reinstall the headrests,

and fold the seat bottom back down.

STE P 11

Repeat Steps 9-10 for the opposite side.

Fully tighten the two M6-1 x 30mm Hex Head

Screws in the factory holes first, then fully

tighten the 1/4 - 20 x 1” Hex Bolts in the

enclosure.

STEP 10

Slide a 1/4” Split Lock Washer and a 1/4” Flat

Washer over a 1/4 - 20 x 1” Hex Bolt. Pass

the assembly through the long end of the

L-Bracket, thread the 1/4 - 20 x 1” Hex Bolt into

the threaded insert in the top of the enclosure,

and hand-tighten.

STEP 9

Slide a 1/4” Split Lock Washer and a 1/4” Flat

Washer over an M6-1 x 30mm Hex Head Screw.

Pass the assembly through the short end of

an L-Bracket, then through a 3/4” OD x 3/8”

ID x 3/8” Spacer, thread the M6-1 x 30mm Hex

Screw into the factory hole, and hand-tighten.

All specifications are subject to change without notice. “JL Audio®”and “How we play®” are registered trademarks of JL Audio, Inc.“Ahead of the Curve” and its respective logo are trademarks

of JL Audio, Inc.

(954) 443-1100

www.jlaudio.com

JLA-SKU# 011495 • ver. 11.17.2017 • 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

Location / OEM

Speaker Size

Suggested JL Audio Speaker Models

Coaxial Models Component Models

Front Doors /

6 x 9-inch

C1-690x(1), C1-690tx(1), C2-690tx(1)

C2-650x(1), C5-650x(1)

C1-690(1), C1-650(1),C2-650(1),

C3-650(1), C5-650(1), C7-650cw(1,2)

Rear Doors /

6.5-inch C1-650x, C2-650x, C5-650x C1-650, C2-650, C3-650,

C5-650, C7-650cw(2)

1 - Installation may require adaptor, 2 - Component woofer only

Andere JL Audio Subwoofer Handbücher

JL Audio

JL Audio Stealthbox SB-H-RIDGLNE/10W3v3 Bedienungsanleitung

JL Audio

JL Audio 10W0 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-TUNDC/8W7 Bedienungsanleitung

JL Audio

JL Audio 12TW3 Bedienungsanleitung

JL Audio

JL Audio 12TW1-2 Bedienungsanleitung

JL Audio

JL Audio 18W6 Montageanleitung

JL Audio

JL Audio Stealthbox SB-GM-TRLBLZR/10W3v3 Bedienungsanleitung

JL Audio

JL Audio W7 Bedienungsanleitung

JL Audio

JL Audio 8W0-4 Bedienungsanleitung

JL Audio

JL Audio 10W0v3-4 Bedienungsanleitung

JL Audio

JL Audio 10W7AE Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-SC-XB/12W3v3 Bedienungsanleitung

JL Audio

JL Audio 6W0-4 Bedienungsanleitung

JL Audio

JL Audio M8W5 Bedienungsanleitung

JL Audio

JL Audio 15W3v2-D4 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-H-PIO1K/10TW3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-SLVD4/10TW3 Bedienungsanleitung

JL Audio

JL Audio 15W1-4 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-N-ARMAD/10W6v2 Bedienungsanleitung

JL Audio

JL Audio gotham v2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-4RNR2/10W3v2 Bedienungsanleitung

JL Audio

JL Audio 12WX Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-J-GCHER3/10W1v2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-SLVEXT/10W6v2 Bedienungsanleitung

Beliebte Subwoofer Handbücher anderer Marken

Sony

Sony XS-AW8 Bedienungsanleitung

Sony

Sony XS-L836 Bedienungsanleitung

B&C Speakers

B&C Speakers 15 HPL 76W Bedienungsanleitung

Velodyne

Velodyne DD-18+ Bedienungsanleitung

Sonance

Sonance Cinema Series SUB 10-150 Bedienungsanleitung

Hifonics

Hifonics HW-12 Kurzanleitung

Magnat Audio

Magnat Audio ADR 130 BP Bedienungsanleitung

Blitz

Blitz BZP106 Bedienungsanleitung

Technics

Technics SB-AS500 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-2 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-3 Bedienungsanleitung

Pyle Pro

Pyle Pro PYLE PRO PDW15125 Bedienungsanleitung

REL Acoustics

REL Acoustics Q Series Bedienungsanleitung

L-Acoustics

L-Acoustics KIVA SB15M Kurzanleitung

Pioneer

Pioneer Elite S-W1EX Bedienungsanleitung

B&C Speakers

B&C Speakers Woofer 12 HPL 76 Bedienungsanleitung

KEF

KEF KUBE 200 Bedienungsanleitung

Yamaha

Yamaha SW500 Bedienungsanleitung