JLG 660SJ Bedienungsanleitung

Operation & Safety

Manual Supplement

Original Instructions -

Keep this manual with the machine at all times.

Model

660SJ Electric

31215477

August 8, 2022 - Rev B

WARNING

Operating, servicing and maintaining this vehicle or equipment can expose you to

chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which

are known to the State of California to cause cancer and birth defects or other re-

productive harm. To minimi e exposure, avoid breathing exhaust, do not idle the

engine except as necessary, service your vehicle or equipment in a well-ventilated

area and wear gloves or wash your hands frequently when servicing. For more infor-

mation go to www.P65Warnings.ca.gov.

660SJ Electric 31215477 3

REVISION LOG

DATE REVISION DESCRIPTION

October 1, 2021 AOriginal Issue

August 8, 2022 B Revision

This Page is intentionally left blank

660SJ Electric 31215477

SECTION CONTENTS

Section Subject Page

REVISION LOG .................................................................................. 3

SECTION 1

USER RESPONSIBILITIES, MACHINE PREPARATION, &

INSPECTION ...................................................................................... 7

1.1 Pre-Start Inspection..............................................................7

1.2 Walk-Around Inspection........................................................8

SECTION 2

MACHINE CONTROLS AND INDICATORS.................................... 11

2.1 660SJ Ground Control Station ..... .... ... .... .... .... .... ... .... ..... .... .. 11

2.2 Multifunction Display... ....... ....... ....... ....... ....... ....... ....... ...... 15

2.3 Platform Controls...............................................................19

SECTION 3

MACHINE OPERATION................................................................... 22

3.1 Motor Operation................................................................22

3.2 Battery Charging................................................................22

SECTION 4

GENERAL SPECIFICATIONS & OPERATOR

MAINTENANCE ............................................................................... 2

4.1 Operating Specifications .... ...... ....... ....... ....... ....... ....... ....... . 25

4.2 Operator Maintenance ....... ...... ....... ....... ....... ....... ....... ....... . 27

4.3 Battery Maintenance .......................................................... 37

4.4 Supplemental Information Only Applicable to CE/UKCA

Machines ..........................................................................37

4.5 EC Declaration of Conformity.. ....... ....... ....... ...... ....... ....... .... 38

4.6 UKCA Declaration of Conformity ...... ....... ....... ....... ....... ....... . 39

This Page is intentionally left blank

660SJ Electric 31215477 7

SECTION 1

User Responsibilities, Machine

Preparation, & Inspection

1.1 PRE-START INSPECTION

The Pre-Start Inspection should include each of the following:

1. Cleanliness — Check all surfaces for leakage (oil or battery fluid) or foreign

objects. Report any leakage to the proper maintenance personnel.

2. Structure — Inspect the machine structure for dents, damage, weld or parent

metal cracks or other discrepancies.

Figure 1. Parent Metal Crack Figure 2. Weld Crack

3. Decals and Placards — Check all for cleanliness and legibility. Make sure none of

the decals and placards are missing. Make sure all illegible decals and placards are

cleaned or replaced.

4. Operation and Safety Manuals — Make sure a copy of the Operation and Safety

Manual, AEM Safety Manual (ANSI markets only), and ANSI Manual of

Responsibilities (ANSI markets only) is enclosed in the weather resistant storage

container.

5. Walk-Around Inspection — Perform as instructed.

6. Battery — Charge as required.

7. Hydraulic Oil — Check the hydraulic oil level. Ensure hydraulic oil is added as

required.

8. Accessories/Attachments — Refer to the Accessories section in this manual or

accessory installed upon the machine for specific inspection, operation, and

maintenance instructions.

9. Function Check — Once the Walk-Around Inspection is complete, perform a

functional check of all systems in an area free of overhead and ground level

obstructions. Refer to Section 4, Machine Operation for more specific instructions.

10. Platform Gate — Keep gate and surrounding area clean and unobstructed. Verify

the gate closes properly and is not bent or damaged. Keep gate closed at all times

except when entering/exiting the platform and loading/unloading materials.

11. Lanyard Attach Points — During operation, occupants in the platform must wear

a full body harness with a lanyard attached to an authori ed lanyard anchorage

point. Attach only one (1) lanyard per lanyard anchorage point.

WARNING

If the machine does not operate properly, turn off the machine immediately! Report

the problem to the proper maintenance personnel. Do not operate the machine

until it is declared safe for operation.

1.2 WALK-AROUND INSPECTION

1.2.1 Walk-Around Inspection

Begin the "Walk-Around Inspection" at Item 1, as noted on the diagram. Continue

checking each item in sequence for the conditions listed in the following checklist.

WARNING

To avoid possible injury, be sure machine power is OFF. Do not operate machine

until all malfunctions have been corrected.

User Responsibilities, Machine Preparation, & Inspection

831215477 660SJ Electric

NOT CE

Do not overlook visual inspection of chassis underside. Checking this area may

result in discovery of conditions which could cause extensive machine damage.

INSPECTION NOTE: On all components, make sure there are no loose or missing parts,

that they are securely fastened, and no visible damage, leaks or excessive wear exists in

addition to any other criteria mentioned.

1. Platform Assembly and Gate - Footswitch works properly, not modified, disabled

or blocked. Gate latches and hinges in working condition.

2. SkyGuard - See Inspection Note.

3. Platform Control Console - Switches and levers return to neutral when activated

and released, decals/placards secure and legible, control markings legible.

4. Platform Rotator - See Inspection Note.

5. Jib Assembly and Jib Rotator (If Equipped) - See Inspection Note.

6. Boom Sections/Uprights/Turntable - See Inspection Note.

7. All Hydraulic Cylinders - No visible damage; pivot pins and hydraulic hoses

undamaged, not leaking.

8. Wheel/Tire Assemblies - Properly secured, no missing lug nuts. Inspect for worn

tread, cuts, tears or other discrepancies. Inspect wheels for damage and corrosion.

9. Drive Motor, Brake, and Hub - No evidence of leakage.

10. Tie Rod Ends and Steering Spindles - See Inspection Note.

11. Counterweight - See Inspection Note.

12. Ground Control Console - Switches and levers return to neutral when activated

and released, decals/placards secure and legible, control markings legible.

13. Hood Assemblies - See Inspection Note.

14. Swing Motor - No evidence of damage.

15. Turntable Bearing - Evidence of proper lubrication. No evidence of loose bolts or

looseness between bearing and machine.

16. Hydraulic Pump and Reservoir - See Inspection Note.

17. Battery - Battery cables tight; See Inspection Note.

18. Air Shutoff Valve (ASOV) (If Equipped) - See Inspection Note.

19. Power Track - See Inspection Note.

20. Turntable Lock - Operable.

User Responsibilities, Machine Preparation, & Inspection

660SJ Electric 31215477 9

21. Auxiliary Power Pump- See Inspection Note.

22. Main Control Valve - See Inspection Note.

23. Frame - See Inspection Note.

User Responsibilities, Machine Preparation, & Inspection

10 31215477 660SJ Electric

Andere Handbücher für 660SJ

Inhaltsverzeichnis

Andere JLG Hubarbeitsbühne Handbücher

JLG

JLG 800AJ HC3 Gebrauchs- und Pflegehandbuch

JLG

JLG 80HX Installations- und Benutzerhandbuch

JLG

JLG E600J Gebrauchs- und Pflegehandbuch

JLG

JLG 0300203771 Bedienungsanleitung

JLG

JLG 450A Gebrauchs- und Pflegehandbuch

JLG

JLG GRADALL 544D Betriebsanleitung

JLG

JLG 800A Installations- und Benutzerhandbuch

JLG

JLG X20JPLUS Handbuch

JLG

JLG 3369LE Bedienungsanleitung

JLG

JLG Toucan 8e Installations- und Benutzerhandbuch

JLG

JLG EcoLift 50 Gebrauchs- und Pflegehandbuch

JLG

JLG R4045 Gebrauchs- und Pflegehandbuch

JLG

JLG 1230ES Gebrauchs- und Pflegehandbuch

JLG

JLG Lull 1044C-54 II Series Bedienungsanleitung

JLG

JLG 800A Gebrauchs- und Pflegehandbuch

JLG

JLG 1500SJ Gebrauchs- und Pflegehandbuch

JLG

JLG 330CRT Gebrauchs- und Pflegehandbuch

JLG

JLG RT2669 Gebrauchs- und Pflegehandbuch

JLG

JLG 1500AJP Gebrauchs- und Pflegehandbuch

JLG

JLG 1200SJP Gebrauchs- und Pflegehandbuch

JLG

JLG TOUCAN 1010 I Gebrauchs- und Pflegehandbuch

JLG

JLG 1930ES Gebrauchs- und Pflegehandbuch

JLG

JLG 0200230092 Gebrauchs- und Pflegehandbuch

JLG

JLG TOUCAN DUO Bedienungsanleitung

Beliebte Hubarbeitsbühne Handbücher anderer Marken

Genie

Genie Z-80 Bedienungsanleitung

Genie

Genie Z-45/25 Bedienungsanleitung

Terex

Terex Z80H-7733 Bedienungsanleitung

Terex

Terex Gyro 4020 Bedienungsanleitung

Terex

Terex Genie Z-51/30 J Bedienungsanleitung

LGMG

LGMG T65JE Bedienungsanleitung

Genie

Genie Z-135/70 Bedienungsanleitung

Oshkosh Corporation

Oshkosh Corporation JLG H800AJ Gebrauchs- und Pflegehandbuch

Oshkosh

Oshkosh JLG 1500SJ Installations- und Benutzerhandbuch

Skyjack

Skyjack SJ30AJE Bedienungsanleitung

Oshkosh

Oshkosh JLG 800A Installations- und Benutzerhandbuch

Terex

Terex Genie Z-135/70 Bedienungsanleitung

Skyjack

Skyjack SJ 46AJ Bedienungsanleitung

Molift

Molift Quick Raiser 205 Bedienungsanleitung

Snorkel

Snorkel SL26RTE Kurzanleitung

Terex

Terex Genie Z-135/70 Installations- und Betriebsanleitung

Terex

Terex Genie ZX-135/70 Installations- und Betriebsanleitung

Oshkosh Corporation

Oshkosh Corporation JLG E300A Bedienungsanleitung