John Lewis Giorgio Bed Bedienungsanleitung

Giorgio Bed

MTO

Thank you for purchasing this Giorgio bed. Please read the instructions carefully before use to ensure safe

and satisfactory operation of this product.

King

PRE-ASSEMBLY PREPARATION

Please ensure instructions are read in full before attempting to assemble this product.

Necessary Tools

Please check the pack contents before attempting to assemble this product. A full checklist of components is

given in this leaflet. If any components are missing, please contact customer services on 01244 689949 or email

[email protected].

This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN

LIFTING to avoid personal injury and (or) damage to the product.

This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.

The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.

Read this leaflet in full before commencing assembl

Do not use power tools to assemble.

1/7

Side Caps x 16

Legs x 4

2/7

M5 Allen Key x 1

M4 Allen Key x 1

Wide Side Caps x 16

Centre Caps x 8

Wide Centre Caps x 8

M6 X 25mm Bolt x 2

M6 Spring Washer x 8

M8 Spring Washer x 2

M6 Washer x 8

Fitting and parts checklist

Headboard x 1

Footboard x 1

Side Rails x 2

Slats x 16

Wide Slats x 16

Centre Rail x 1

Pillows x 2

Parts

Fittings

M6 X 40mm Bolt x 8

M8 X 45mm Bolt x 2

Place Legs (7) under the Headboard (1), and Footboard (2). Attach the Legs (7) to both Headboard and

Footboard using M6 x 40mm Bolt (J), M6 Spring Washer (G) and M6 Washer (H). On Footboard,

hand-tighten to loosely secure parts together. Do not Tighten with the M4 Allen Key until you have inserted

the leg’s Bolt to the side rail in the next step. (As per diagram below)

Step by step assembly instructions

M8 Spring Washer

x 2

M8 x 45mm Bolt

x 2

Step One

Step Two

3/7

Fig. 2

Fig. 1

M8x45mm (K)

(L)

LOOSELY SECURE PARTS TOGETHER

IN ORDER FOR CENTRE RAIL

TO FIT IN NEXT STEP

Bracket

Side Rail

AND

Starting with the Headboard (1) attach the Side Rails (3) using the one pre-inserted M8 x 45mm Bolt (K), M8 Spring

Washer (L). Please do not tighten the bolts yet. Now, place Metal Bracket on Side Rails (3) over pre-inserted in the

Footboard (2). Only then can you proceed to insert the M8 x 45mm Bolt (K), M8 Spring Washer (L) in the Other hole

on the Headboard (1). Do not tighten with M5 Allen Key (B) until you have inserted the Centre Rail in the next step.

M6 X 40mm x 6

M6 Spring Washer

x 6 M6 Washer x 6 Legs x 4

H.G. J. 7.

DO NOT TIGHTHEN THE BOLT ON

THE FOOTBOARD UNTIL YOU

HAVE INSERTED THE LEG’S BOLT

AT THE SIDE RAIL

M6 x 40mm (J)

M6 Spring Washer

(G)

M6 Washer (H)

(Footboard)

Bolt inserted

on Outer Hole ONLY

x 2

(HEADBOARD)

M4 (A)

M6 x 40mm (J)

M6 Spring Washer

(G)

M6 Washer (H)

x 2

Bolt inserted

on Outer Hole

ONLY

NOTE: Ensure the Side Rail (3) which has sticker saying ‘HEAD’ is attached on headboard side.

HEAD

M6 X 40mm x 2

M6 Spring Washer

x 2 M6 Washer x 2 M4 Allen Key x 1

H.G. J. A.

4/7

Step Three

Step Four

M4 Allen Key x 1

Lower the Centre Rail (6) into the brackets in the centre of the Headboard (1) and Footboard (2) as shown in Fig.3.

Now secure the Centre Rail (6) using the M6x25mm Bolts (I) and tighten with the M4 Allen Key (A) as shown

in Fig.4. You can now tighten the bolts in the Side Rails from the previous step (Step two) with the M5 Allen Key (B)

so that all the fastenings are secure.

M5 Allen Key x 1

M6 x 25mm x 2

I. A. B.

Centre Rail

And

M4(A)

M6 x 25(I)

And

AFTER INSERTING CENTRE RAIL,

TIGHTEN ALL FIXINGS FULLY

INCLUDING BOLTS AT SIDE RAILS

(FROM STEP TWO)

M8x45mm (K)

(L)

M5(B)

(Footboard)

Bolt inserted

on Outer Hole

ONLY

x 2

M6 x 40mm (J)

M6 Spring Washer

(G)

M6 Washer (H) M4 (A)

From the previous step (Step One), continue to hand-tighten the leg onto the Side Rail (3) to loosely secure the

parts together onto the Footboard (2) using the M6 x 40mm Bolt (J), M6 Spring Washer (G) and M6 Washer (H).

Adjust the leg accordingly, and now you can tighten all the bolts including those from the previous step

(Step One) with the Allen Key M4 (A) so all the fastenings are now tightened. (As per diagram below

AFTER INSERTING SIDE RAIL,

TIGHTEN ALL LEG FIXINGS FULLY

INCLUDING BOLTS AT FOOTBOARD

(FROM STEP ONE)

HEAD

2 Lines

Normal slats

2 Lines

Normal slat

2 Lines

Wide slats

2 Lines

Wide slats

2 Lines

Normal slats

2 Lines

Normal slats

4 Lines

Wide slats

ZONE 2

ZONE 1

ZONE 5

ZONE 7

ZONE 6

ZONE 4

ZONE 3

Diagram 1

(x8)

Side Caps x 16

Wide Centre Caps

x 8

Wide Side Caps

x 16

Wide Slats x 16

Slats x 16

With the curved side facing upwards, insert 2 slats into a centre cap then into 2 side caps on either

end(x16). (Please note the Wide Slats (5) must be inserted with the Wide Centre Caps (E) and Wide

Side Caps (F)). Repeat this process for all slats.

Note: Please see the Diagram 1 below to arrange the slat with the correct system).

Centre Caps x 8

Step Six

5/7

Step Five

Pillows x 2

Rest the pillows (8) onto the headboard (1) until it reaches the wooden shelf on the headboard.

6/7

Step Seven

This bed is now ready to use.

Care and Maintenance

Safety Instructions

If you require any additional information or have any issues with this product please call the customer

services helpline on 01244 689949 or email [email protected].

Never drag furniture when moving it. Always lift it.

Periodically check all fixings to ensure none have come loose and re-tighten where necessary.

Please take care when handling or moving the furniture as careless handling may cause damage or injury.

Furniture can be dangerous if incorrectly installed. Any assembly should be carried out by a competent

adult.

No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.

During assembly, children should be kept away from the product due to possible risk of injury.

Do not use this item if any components are missing or damaged.

It is recommended that care is taken when moving heavy objects to a new location to avoid

personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.

This bed should be cleaned using a soft, damp cloth and dried immediately.

Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently

damage the surface.

Do not use detergents and do not rub as this can cause permanent damage.

Always protect your bed from direct sunlight as this may accelerate the natural ongoing discolouration

process.

Bolts holding together the bed frame should be tightened regularly.

Please retain this information leaflet for future reference.

This product complies with BS EN 1725:1998.

7/7

Inhaltsverzeichnis

Andere John Lewis Inneneinrichtung Handbücher

John Lewis

John Lewis Medan 2 door wardrobe Bedienungsanleitung

John Lewis

John Lewis OXFORD 83501 Bedienungsanleitung

John Lewis

John Lewis BAMBOO GARMENT RAIL 57088001 Bedienungsanleitung

John Lewis

John Lewis Emily Storage Bed Bedienungsanleitung

John Lewis

John Lewis ABACUS 816/00201 Bedienungsanleitung

John Lewis

John Lewis Charlotte 803/15204 Bedienungsanleitung

John Lewis

John Lewis Skye Bedienungsanleitung

John Lewis

John Lewis NOAH 14830 Bedienungsanleitung

John Lewis

John Lewis Mixit Bedienungsanleitung

John Lewis

John Lewis FOUR TIER SHOE RACK Bedienungsanleitung

John Lewis

John Lewis 803/44204 Bedienungsanleitung

John Lewis

John Lewis Amy White Chair Bedienungsanleitung

John Lewis

John Lewis House Bedienungsanleitung

John Lewis

John Lewis Miami 4 Bedienungsanleitung

John Lewis

John Lewis Lorn 83608204 Bedienungsanleitung

John Lewis

John Lewis 570/30835 Bedienungsanleitung

John Lewis

John Lewis 803 11105 Bedienungsanleitung

John Lewis

John Lewis 83606802 Bedienungsanleitung

John Lewis

John Lewis ZigZag Bedienungsanleitung

John Lewis

John Lewis St Ives Bed 810/81001 Bedienungsanleitung

John Lewis

John Lewis 57030808 Bedienungsanleitung

John Lewis

John Lewis Rouen 803/44304 Bedienungsanleitung

John Lewis

John Lewis Marlow Cotbed Bedienungsanleitung

John Lewis

John Lewis WILTON NURSERY COT BED Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung