John Lewis REIGN CRYSTAL PENDANT Bedienungsanleitung

REIGN CRYSTAL PENDANT

USER GUIDE

Caring for

your product

We recommend cleaning with a soft dry cloth.

Do not use abrasive materials as these will damage the finish.

Indoors use only.

Aftercare and

Troubleshooting

Why is the light not working when switched on?

Check your power supply is switched on

Turn off light and check that the bulb is inserted correctly

Check the bulb is still in working order.

Replace bulbs from John Lewis or established brand of the same type

and compatibility

If you experience any unresolvable technical issues with the product,

contact your nearest John Lewis & Partners shop or John Lewis &

Partner Technical Support on 03301 230106.

Specification

Recommended bulb: G9 halogen or G9 LED

Max. power: 3x28W

Bulb not included

Voltage: 220 –240V, 50Hz

IP rating: 20

Weight: 2.85kg

5 year guarantee

At JohnLewis& Partners we test every light to high quality standards so we are

able to offer you a 5 year guarantee.

Recycling

This symbol

indicates that this product should not be treated as normal

household waste and it should be recycled. John Lewis & Partners do not

operate instore take back, but as members of the Distributor Take Back

scheme have funded the development and upgrade of recycling facilities across

the UK. Please take it to your nearest collection facility or for further details

contact your local council or visit www.recycle-more.co.uk.

John Lewis Partnership

171 Victoria Street

London SW1E 5NN

johnlewis.com

Made inChina

Please retain these instructions for future reference.

Introduction

Thank you for purchasing this Reign Crystal

Pendant.

Please read the instructions carefully before

use to ensure safe and satisfactory operation

of this product.

Product assembly

Ensure the mains electricity supply switched off at the

fuse board.

Step 1

If removing an existing fitting, note down all wiring

connections.

Put the centre rod into the top of lampholder base,

and then secure with grub screw using Allen key

(provided)

Warnings

This product is Class I and must be earthed.

This fitting should be fitted in accordance with IEE Regulations and the

Building

Regulations. If in any doubt, or where required by law, consult a competent

person who is registered with an electrical self-certification scheme.

Further information is available online or from your Local Authority.

To prevent electric shock,switch off at the mains supply before installing or

maintaining this fitting. Ensure otherpersons cannot restore the electricity

supply without your knowledge. If you are in any doubt, please consult a

qualified electrician. It is the installer’s responsibility to ensure that the fixings

and plugs used are suitable for the surface you are fixing your product on.

If replacing an existing fitting, make a note of the connections.

Always use the correct type and power bulb. Never exceed the power stated.

When changing a bulb, always switch off at the mains and allow the old bulb

to cool down before handling. Dispose of used bulbs carefully.

The flexible cable on this luminaire, if damaged, shall only be replaced by the

manufacturer or his service agent or a similar qualified person.

Caution! The bulb and surrounding parts can become hot during

use

Step 2

Ensure that the bracket (supplied) is fixed to a wooden

joist in the ceiling using screws (supplied) or use a

suitable fixing to the ceiling which will support the weight

of the fitting.

The weight of the fitting must be supported by the

suspension bracket and not the flexible cable.

Adjust the chain to the required length, ensure the cable

is longer than the chain, feed the flexible cable through

the chain links and into the ceiling cup. Ensure that no

strain is placed on the cable.

Connect cables to terminals as shown below.

Check all wires are tight in the terminal block and no

loose strands are left out.

Cover with insulating tape (not included).

Step 3

Push up ceiling cup and secure with grub screws provided

Parts list

Description

Image

Quantity

Step 4

Attach the correct type and wattage bulb to the

lamp holder (bulb not included).

The maximum power indicated must not be

exceeded.

Insert the crystal rulers into the holes gently as per

illustration.

Switch on the electricity supply at the fuse board.

Andere John Lewis Inneneinrichtung Handbücher

John Lewis

John Lewis Elementary 324 30602 Bedienungsanleitung

John Lewis

John Lewis Zane AW52314-JLP Bedienungsanleitung

John Lewis

John Lewis 049 Bedienungsanleitung

John Lewis

John Lewis BALANCE Wide shelving 862 Bedienungsanleitung

John Lewis

John Lewis Resto Bedstead Bedienungsanleitung

John Lewis

John Lewis BALANCE 862/70101 Bedienerhandbuch

John Lewis

John Lewis Ovum 324 32401 Bedienungsanleitung

John Lewis

John Lewis 82006901 Bedienungsanleitung

John Lewis

John Lewis Duhrer 836 03704 Bedienungsanleitung

John Lewis

John Lewis 816/82301 Bedienungsanleitung

John Lewis

John Lewis Carter Desk White Bedienungsanleitung

John Lewis

John Lewis Apollo 803/41301 Bedienungsanleitung

John Lewis

John Lewis Grace Bed Bedienungsanleitung

John Lewis

John Lewis ABACUS 3 SHELF Bookcase Bedienungsanleitung

John Lewis

John Lewis Victoria 803/67902 Bedienungsanleitung

John Lewis

John Lewis 86203502 Bedienungsanleitung

John Lewis

John Lewis 57040191 Bedienungsanleitung

John Lewis

John Lewis Vienna 862 22406 Bedienungsanleitung

John Lewis

John Lewis SBSKITC Bedienungsanleitung

John Lewis

John Lewis Mixit Bedienungsanleitung

John Lewis

John Lewis Chunky Weave 820 88903 Bedienungsanleitung

John Lewis

John Lewis Morgan Guest Bedstead 800/61601 Bedienungsanleitung

John Lewis

John Lewis Lansbury Antique Brass Bed Bedienungsanleitung

John Lewis

John Lewis 413 92511 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung