Johnson Controls M300MJ-4-20 Bedienungsanleitung

M300MJ-4-20

4-20mA Analog Input Module

BEFORE INSTALLING

This information is included as a quick reference installation guide. Refer to

the control panel installation manual for detailed system information. If the

modules will be installed in an existing operational system, inform the opera-

tor and local authority that the system will be temporarily out of service. Dis-

connect power to the control panel before installing the modules.

NOTICE: This manual should be left with the owner/user of this equipment.

GENERAL DESCRIPTION

The M300MJ-4-20 4-20mA Analog Input Module is intended for use in in-

telligent, two-wire systems, where the individual address of each module is

selected using the built-in rotary switches. This module allows intelligent pan-

els to interface and monitor two-wire or three-wire sensors, that produce a

4-20mA signal output. It transmits the status (normal, open, or alarm) of one

sensor back to the control panel. The M300MJ-4-20 has a panel controlled

LED indicator. Only one sensor can be connected to the M300MJ-4-20.

COMPATIBILITY REQUIREMENTS

To ensure proper operation, this module shall be connected to a compati-

ble Johnson Controls system control panel only (list available from Johnson

Controls). In addition, please refer to Johnson Controls Device Compatibility

document for the list of compatible devices.

FIGURE 1. CONTROLS AND INDICATORS:

C0218-05

SPECIFICATIONS

SLC

Normal Operating Voltage: 15 to 32 VDC

Maximum Current Draw: 9.3 mA (LED on)

Average Operating Current: 1 mA (LED flashing)

External Supply

Normal Operating Voltage: 24 VDC Nominal

Standby Current: 10 mA

Maximum Current: 510 mA

Initiating Device

Maximum Current: 500 mA

Temperature Range: –10°C to 60°C

Humidity: 10% to 95% Non-condensing

Dimensions: 41/2˝ H × 4˝ W × 1

1/4˝ D (Mounts to a 4˝ square by 21/8˝ deep box.)

Accessories: SMB500 Electrical Box

JC-460-007 1 I56-3369-001

I56-3369-001

INSTALLATION AND MAINTENANCE INSTRUCTIONS

MOUNTING

The M300MJ-4-20 mounts directly to 4-inch square electrical boxes (see Fig-

ure 2). The box must have a minimum depth of 21/8inches. Surface mounted

electrical boxes (SMB500) are available from Johnson Controls.

FIGURE 2. MODULE MOUNTING:

C0449-01

WIRING

NOTE: All wiring must conform to applicable local codes, ordinances, and

regulations. This module is intended for powerlimited wiring only.

1. Install module wiring in accordance with the job drawings and appropri-

ate wiring diagrams.

2. Set the address on the module per job drawings.

3. Secure module to electrical box (supplied by installer), Figure 2.

507 E. Michigan Street

Milwaukee, WI 53201

Phone: 414.524.4000

JC-460-007 2 I56-3369-001

Figure 3. 4-20mA Module 3-wire Configuration:

(+)

(–)

(+)

(–)

(+)

(–)

TERMINAL WIRING MUST

BE POWER LIMITED.

TO NEXT

DEVICE

M300MJ-4-20

MODULE SIGNAL LINE CIRCUIT (SLC)

32 VDC MAX.

TWISTED PAIR

IS RECOMMENDED

CONNECT MODULES TO LISTED

COMPATIBLE CONTROL PANELS ONLY.

FROM PANEL

OR PREVIOUS

DEVICE

SLC WIRING

( - )

SENSE

( + )

{

TO 4-20mA

3-WIRE

DEVICE

DO NOT LOOP WIRE UNDER

TERMINALS. BREAK ALL WIRE

RUNS TO PROVIDE SUPERVISION

OF CONNECTIONS.

24 VDC POWER

LIMITED

( + ) ( - )

24 VDC POWER

SUPPLY ISOLATED,

REGULATED, POWER

LIMITED.

TO NEXT

MODULE

C0994-03

Figure 4. 4-20mA Module 2-wire Configuration:

(+)

(–)

(+)

(–)

(+)

(–)

TERMINAL WIRING MUST BE

POWER LIMITED.

DO NOT LOOP WIRE UNDER

TERMINALS. BREAK ALL WIRE

RUNS TO PROVIDE SUPERVISION

OF CONNECTIONS.

M300MJ-4-20

MODULE

TO NEXT

DEVICE

SIGNAL LINE CIRCUIT (SLC)

32 VDC MAX.

TWISTED PAIR

IS RECOMMENDED

CONNECT MODULES TO LISTED

COMPATIBLE CONTROL PANELS ONLY.

FROM PANEL

OR PREVIOUS

DEVICE

SLC WIRING

24 VDC POWER

LIMITED

( + ) ( - )

( – ) SENSE

( + )

{

TO 4-20mA

2-WIRE DEVICE

24 VDC POWER SUPPLY

ISOLATED, REGULATED,

POWER LIMITED.

TO NEXT

MODULE

C0995-03

Andere Johnson Controls E/A-System Handbücher

Johnson Controls

Johnson Controls IOM3733 Bedienungsanleitung

Johnson Controls

Johnson Controls IOM2723 Bedienungsanleitung

Johnson Controls

Johnson Controls Tyco Kantech KT-MOD-IO16 Bedienungsanleitung

Johnson Controls

Johnson Controls IOM1711 Bedienungsanleitung

Johnson Controls

Johnson Controls IOM3721 Bedienungsanleitung

Johnson Controls

Johnson Controls IOM2710 Bedienungsanleitung

Johnson Controls

Johnson Controls IOM4710 Bedienungsanleitung

Johnson Controls

Johnson Controls FX-PCX3731 Bedienungsanleitung

Johnson Controls

Johnson Controls FX-PCX17 Series Bedienungsanleitung

Johnson Controls

Johnson Controls IOM3733 Bedienungsanleitung

Johnson Controls

Johnson Controls IOM3711 Bedienungsanleitung

Johnson Controls

Johnson Controls FX-PCX47 Bedienungsanleitung

Johnson Controls

Johnson Controls FX-PCX4711 Series Bedienungsanleitung

Johnson Controls

Johnson Controls Metasys MS-IOM4711 Series Bedienungsanleitung

Johnson Controls

Johnson Controls FX-PCX2721 Bedienungsanleitung

Johnson Controls

Johnson Controls FT-04A Bedienungsanleitung

Johnson Controls

Johnson Controls FX-PCX37 Bedienungsanleitung

Johnson Controls

Johnson Controls IOM4711 Bedienungsanleitung

Johnson Controls

Johnson Controls FX-PCX1711 Series Bedienungsanleitung

Johnson Controls

Johnson Controls IOM3731-0A Bedienungsanleitung

Johnson Controls

Johnson Controls EasyIO FS Series Bedienungsanleitung

Johnson Controls

Johnson Controls IOM3721 Bedienungsanleitung

Johnson Controls

Johnson Controls MS-IOM1710-0 Bedienungsanleitung

Johnson Controls

Johnson Controls IOM2721 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung