JRC JHS-180 Bedienungsanleitung

Automatic Identification System

Model JHS-180

Operation Manual

(Field Maintenance)

CONTENTS

1.Field Maintenance mode

1.1 Turning On the power for Field Maintenance mode

1.2 Menu Tree of Field Maintenance mode

2. FIELD MAINTENANCE

2.1 SELF TEST

2.2 COMM STATUS

2.3 REPORTING RATE

2.4 SELF TEST LOG

2.5 RANGEALARM LOG

2.6 PORT LOG

2.7 PORT OPTION

2.8 TRX CHECK

2.9 SOFTWARE VER UP

3. INITIALIZE

3.1 SENSOR SETTING

3.2 INT. GPS SETTING

3.3 SHIP STATIC DATA

3.4 TRANSPONDER INIT

3.5ANTENNASELECTION

1.Field Maintenance Mode

1.1 Turning On the power for Field Maintenance mode

JHS-180 can operate “Field Maintenance Mode” for installation and maintenance.

To operate “Field Maintenance Mode”, JHS-180 needs special operation in turning the power on.

The special operation is;

When turn the power on, pressing and holding [PWR] and [MENU] until starting display

“AIS CONTROLLER NOW LOADING ---” appears.

In “Field Maintenance Mode” operation,

-The transponder doesn’t operate automatically TDMAtransmission.

-Two menu item are added to the “Main Menu”.

“Main Menu” in Field Maintenance Mode operation

1.2 Menu Tree of Field Maintenance mode (Power On:[MENU]+[PWR])

Select(1) key

(

Power On

)

[▲]/[▼],[ENT]

Other Ships List

[0]-[9] or [▲]/[▼],[ENT] [0]-[9] or [▲]/[▼],[ENT] [0]-[9] or [▲]/[▼],[ENT]

[MENU] [MENU]key

3.MAIN MENU 1.MESSAGE 1.EDIT AND TX Destination address

Message type

Message editing

Transmission

2.TX TRAY Transmitted Message reading

3.RX TRAY Received Message reading

4.INTERROGATION Address,Req.Info., Tx and Ack

5.LONG RANGE Received Long Range Message

2.DESTINATION 1.DESTINATION

2.WAYPOINT TEXT

3.ETA

4.WAYPOINT

3.NAVIGATION 1.NAVIGATIONAL STATUS

2.PERSONS ON-BOARD

3.TYPE OF SHIP

4.CARGO TYPE

5.DRAUGHT

6.HEIGHT OVER KEEL

4.ALARM SETTING 1.RANGE

2.LOST TARGET

5.GROUP SHIP Registration, Deletion

6.SET UP 1.PASSWORD Password changing

2.CH MANAGEMENT

3.OWN SHIP DATA

4.LONG RANGE RESPONSE

5.CONTRAST

6.NUMBER OF RETRIES

7.MAINTENANCE 1.TRX CONDITION

2.AIS ALARM

3.SENSOR STATUS

User Menu 4.POWER ON/OFF LOG

5.TX ON/OFF LOG

6.SOFTWARE VERSION

8.FIELD MAINTENANCE 1.SELF TEST

2.COMM STATUS

Field Maintenance Menu 3.REPORTING RATE

4.SELF TEST LOG

5.RANGE ALARM LOG

6.PORT LOG Each port sentence log

7.PORT OPTION

8.TRX ADJUST

9.SOFTWARE VERSION UP Transponder version up, Controller version up

0.CONTROLLER INITIALIZE

9.INITIALIZE 1.SENSOR SETTING 1.SENSOR1 (Sentence Select, Baudrate,Parity bit)

2.SENSOR2 (Sentence Select, Baudrate,Parity bit)

3.SENSOR3 (Sentence Select, Baudrate,Parity bit)

4.SENSOR4 (Sentence Select, Baudrate,Parity bit)

5.SENSOR5 (Sentence Select, Baudrate,Parity bit)

2.INTERNAL GPS SETTING 1.INT. GPS POSITION

2.ANTENNA HEIGHT

3.ROUGHLY POSITION

4.UTC

5.TIME DIFFERENCE

3.SHIP STATIC DATA SETTING 1.SHIP NAME

2.MMSI NUMBER

3.IMO NUMBER

4.CALL SIGN

5.GPS ANT. POSITION

6.SENSOR TYPE

4.TRANSPONDER INITIALIZE

5.ANTENNA SELECTION

Other Ship's detail Information

2. FIELD MAINTENANCE

“FIELD MAINTENANCE” menu is displayed by pressing 8 key in the “Main Menu”.

Display of “FIELD MAINTENACE”

2.1 SELF TEST

“SELF TEST” menu is displayed by pressing 1 key in the “FIELD MAINTENANCE” menu.

Display of “SELF TEST” (All result is OK)

Display of “SELF TEST” (All result is fault)

Display of “SELF TEST” (Time out)

Indication of failures in NTE-180 AIS Transponder

Control unit Indication TRX unit Indication

CPU(FLASH ROM) FROM PA PA

CPU(SRAM) SRAM Temperature TEMP

Ext. FLASH ROM EFROM Forward power VF

Serial

Communication

Access

SCA Reverse power VR

Serial I/O SIO

Digital Up Converter DUC

GPS receiver GPS

GPS Information GPS-INFO

2.2 COMM STATUS

“COMM STATUS” menu is displayed by pressing 2 key in the “FIELD MAINTENANCE” menu.

Display of “COMM STAUS”

2.3 REPORTING RATE

“REPORTING RATE” menu is displayed by pressing 3 key in the “FIELD MAINTENANCE” menu.

Display of “REPORTING RATE”

2.4 SELF TEST LOG

“SELF TEST LOG” menu is displayed by pressing 4 key in the “FIELD MAINTENANCE” menu.

Display of “SELF TEST LOG”

Andere Handbücher für JHS-180

Inhaltsverzeichnis

Andere JRC Schiffsausrüstung Handbücher

JRC

JRC JAN-7201S Bedienungsanleitung

JRC

JRC ECDIS Bedienungsanleitung

JRC

JRC JFE-400 Bedienungsanleitung

JRC

JRC JAN-7201 Bedienungsanleitung

JRC

JRC JUE-75C Bedienungsanleitung

JRC

JRC JFC-180BB Bedienungsanleitung

JRC

JRC Alphatron Marine AlphaAnnounce Bedienungsanleitung

JRC

JRC Alphatron SSRS Bedienungsanleitung

JRC

JRC JHS-180 Bedienungsanleitung

JRC

JRC JMR-5400 Series Bedienungsanleitung

JRC

JRC JHS-770S - Bedienungsanleitung

JRC

JRC JLN-205MK2 Bedienungsanleitung

JRC

JRC Alphatron Marine Rudder Feedback Unit HD Bedienungsanleitung

JRC

JRC JFC-130 - Bedienungsanleitung

JRC

JRC NDC-2000 Bedienungsanleitung

JRC

JRC JFE-380 - Bedienungsanleitung

JRC

JRC JFE-582 Bedienungsanleitung

JRC

JRC JHS-182 - Bedienungsanleitung

JRC

JRC JFC-130 - Bedienungsanleitung

JRC

JRC JUE-500 Bedienungsanleitung

JRC

JRC AlphaWind AlphaLine Series Bedienungsanleitung

JRC

JRC JAN-9201S Bedienungsanleitung

JRC

JRC Alphatron Marine AlphaDynaPos Bedienungsanleitung

JRC

JRC JUE-95SA - Bedienungsanleitung

Beliebte Schiffsausrüstung Handbücher anderer Marken

Clarion

Clarion CMS2 Reparaturanleitung

EBS

EBS M7000 Bedienungsanleitung

Kongsberg

Kongsberg M3 Bathy Bedienungsanleitung

NPK

NPK SCS-1002 Bedienungsanleitung

Furuno

Furuno FE-800 Bedienungsanleitung

Harken

Harken 1561 Bedienungsanleitung

Simrad

Simrad DD15 Bedienungsanleitung

Notifier

Notifier FS-BSO Bedienungsanleitung

Raymarine

Raymarine ST40 Bedienungsanleitung

E2S

E2S E2XS112UL Bedienungsanleitung

R2Sonic

R2Sonic 2026 Bedienungsanleitung

COBHAM

COBHAM SAILOR 6000 Bedienungsanleitung

Raymarine

Raymarine Maxiview ST80 Benutzerhandbuch

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Montageanleitung

Raymarine

Raymarine ST60 Tridata Benutzerhandbuch

Sonic

Sonic 2024 Bedienungsanleitung

Quicksilver

Quicksilver 88688A25 Handbuch

Furuno

Furuno Navtex NX-700-A Bedienungsanleitung