Jung MSC 1000 KNX Bedienungsanleitung

KNX module

Art.-No.: MSC 1000 KNX

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

Figure 1: View of front side

Figure 2: View of rear side

(1) Feedthrough for loudspeaker cable

(2) Connection to Smart Display

(3) KNX connection

(4) Connection of pushbutton expansion module

1/3

82577403

J:0082577403 12.06.2012

3 Function

System information

This device is a product of the KNX system and complies with the KNX directives. Detailed

technical knowledge obtained in KNX training courses is a prerequisite to proper

understanding.

The function of this device depends upon the software. Detailed information on loadable

software and attainable functionality as well as the software itself can be obtained from the

manufacturer´s product database. Planning, installation and commissioning of the device are

carried out with the aid of KNX-certified software. The latest versions of product database and

the technical descriptions are available on our website.

Intended use

- Attaching JUNG Smart Control to KNX installations

- Installation indoors in flush-mounted appliance box according to DIN 49073

4 Information for electrically skilled persons

DANGER!

Electrical shock on contact with live parts in the installation environment.

Electrical shocks can be fatal.

Before working on the device, disconnect the power supply and cover up live

parts in the working environment.

4.1 Fitting and electrical connection

Mounting and connecting the device

Figure 3: Installation of KNX module with Smart Control

When the pushbutton expansion module is used: Use 3-gang supporting frame

Supporting frame and frame for Smart Control are installed. Power supply and – when

applicable – connecting cable are connected to the loudspeaker module.

Pushbutton expansion module is installed in the bottom opening. Guide the connecting cable

between supporting frame and intermediate web.

o Connect bus cable with connecting terminal to connection (3).

o Guide the loudspeaker cable through the groove (1) of the communication module

provided.

2/3

82577403

J:0082577403 12.06.2012

KNX module

o Snap communication module onto the back of the Smart Control in the correct position.

o When installing with pushbutton expansion module: Insert connecting cable into connection

(4) of the communication module in the correct position.

o Push the Smart Control with the communication module carefully into the supporting frame

and lock into place. Do not squeeze connecting cables.

4.2 Commissioning

Loading the physical address and application software

Smart Control is installed and connected to KNX module .

The power supply and bus voltage are switched on.

o Press the symbol ‘ on the function page.

The "Settings" page opens.

i A keypad for entering a password appears depending on programming.

o Select the "programming mode" entry.

The device displays the programming mode.

o Assign physical address.

o Load the application software.

5 Appendix

5.1 Technical data

KNX medium TP 1

Commissioning mode S-mode

Rated voltage KNX DC 21 ... 32 V SELV

Power consumption KNX max. 150 mW

Connection mode KNX Standard terminal

5.2 Warranty

We reserve the right to make technical and formal changes to the product in the interest of

technical progress.

We provide a warranty as provided for by law.

Please send the unit postage-free with a description of the defect to our central customer

service office.

ALBRECHT JUNG GMBH & CO. KG

Volmestraße 1

58579 Schalksmühle

Telefon: +49.23 55.8 06-0

Telefax: +49.23 55.8 06-2 04

[email protected]

www.jung.de

Service Center

Kupferstr. 17-19

44532 Lünen

Germany

3/3

82577403

J:0082577403 12.06.2012

KNX module

Inhaltsverzeichnis

Andere Jung Steuereinheit Handbücher

Jung

Jung 4008 TSM Montageanleitung

Jung

Jung 4074 TSM Bedienungsanleitung

Jung

Jung KNX 4192 TSM Bedienungsanleitung

Jung

Jung 2224 TSM Bedienungsanleitung

Jung

Jung KNX RF Series Bedienungsanleitung

Jung

Jung 2072 TSM Bedienungsanleitung

Jung

Jung 3091 TSM Bedienungsanleitung

Jung

Jung 4093 KRM TS D Bedienungsanleitung

Jung

Jung KNX 5071 TSM Bedienungsanleitung

Jung

Jung 4092 TSM Bedienungsanleitung

Jung

Jung KNX 5091 TSM Bedienungsanleitung

Jung

Jung KNX 2114 REG Bedienungsanleitung

Jung

Jung 30XX TSM Series Bedienungsanleitung

Jung

Jung ZLL 5004M Series Bedienungsanleitung

Jung

Jung KNX 42911 ST Bedienungsanleitung

Jung

Jung TK SV STG 60 REG Bedienungsanleitung

Jung

Jung 4091 TSM Bedienungsanleitung

Jung

Jung SM 1608 Bedienungsanleitung

Jung

Jung 4074 TSM Bedienerhandbuch

Jung

Jung KNX 5071 TSM Bedienerhandbuch

Jung

Jung BT 1001 Series Bedienungsanleitung

Jung

Jung 5192KRMTSD Series Bedienerhandbuch

Jung

Jung 1240 STE Bedienungsanleitung

Jung

Jung WL 2200 REG Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung