Jung Smart Control 5 Bedienungsanleitung

Smart Control 5

06.12.20191 / 30024020101

Smart Control 5

Ref.-no.: SC 5 SW

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, re or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or load.

These instructions are an integral part of the product, and must remain with the end customer.

2 Structure of the device

Figures 1 and 2: Structure of the device

(1) Mounting screws

(2) Supporting frame

(3) Mounting hooks

(4) Smart Control

(5) Locking screws

(6) LAN/PoE

3 Function

Intended purpose

- Visualisation and operation of system statuses and information on building automation

- Installation vertical

- Installation in appliance box according to DIN 49073

Product characteristics

- KNX visualisation in combination with Visu Pro Server (ref.-no.: JVP-SERVER-H2, JVP-SENEC-H2)

- KNX visualization in combination with Smart Visu Server (ref.-no.: SV-SERVER-INT)

- eNet visualisation in combination with eNet server (ref.-no.: ENET-SERVER) with software version 2.2 or higher

- Door call function only in combination with Siedle Smart Gateway SG 650-.. or SG 150-..

- High performance HD screen

- Proximity sensor

- Graphical user interface

- Ambient light sensor

- Smart Gateway with integrated image storage

Smart Control 5

06.12.20192 / 30024020101

4 Information for electrically skilled persons

Installation and electrical connection

DANGER

Electric shock from touching live parts in the installation environment.

An electric shock can be fatal.

Before working on the device, disconnect the power and cover live parts in the area.

Figures 1 to 3: Installation and electrical connection

Ensure correct orientation when installing the appliance box. Mounting screws (1) must be in vertical alignment.

• Mount supporting frame (2) in vertical orientation on the appliance box, mounting hooks (3) in front.

• Release locking screws (5).

• Connect LAN (PoE).

• Connect optional power supply.

• Place Smart Control (4) ush on supporting frame.

Adapt mounting hooks carefully in the provided notches in Smart Control.

• Tighten locking screws (g. 3).

5 Operation

Sidebar – Menu overview

- Door Communication (app)

- eNet Smart Home (app)

- JUNG Visu Pro Server (app)

- JUNG Smart Visu Server (app)

- Settings

- Network Conguration

- General Settings

- Password Protection

- Application Menu

- System Update

Selecting the default application

After connecting the device an app overview for selecting the default application is shown.

• Select default application and conrm with “Save”.

Application will start automatically after interruption of power supply, rmware updates or Siedle door call function.

Opening the sidebar

• Swipe from the right side of the touchscreen to the middle of it.

Sidebar opens.

Starting an app manually

Requirement: App visible in the sidebar

• Select app in the sidebar.

App starts.

Smart Control 5

06.12.20193 / 30024020101

Changing the default application

• Select menu “Settings“ in the sidebar.

• Select submenu “Application Menu“.

App overview is shown.

• Select default application and conrm with “Save”.

Default application is changed.

iThe visibility of apps can be changed with the eye symbol.

Changing the screen saver

• Select menu “Settings“ in the sidebar.

• Select submenu “General Settings“.

• Select submenu “Display“.

• Select “Daydream“.

Available screen savers are shown.

• Select screen saver and congure it, if necessary.

Screen saver is changed.

iThe time to the sleep of the display can be set in the app bar at the top.

Updating the rmware

Requirement: Internet connection

• Select menu “Settings“in the sidebar.

• Select submenu “System Update“.

Firmware is updating.

6 Technical data

Rated voltage DC 24 V SELV

Rated power < 1,5 W

Screen diagonal 127 mm / 5″

Resolution 720 x 1280

Frame dimensions (W x H) 81 x 132 mm

Power supply PoE (Power over Ethernet)

acc. to IEEE 802.3af or

DC 24 V via external power supply

(not included)

Processor Cortex-A53

Ambient temperature 0 ... +30 °C

7 Accessories

Power supply

ush-mounted NT 2405 VDC

for rail mounting NT 2415 REG VDC

8 Warranty

The warranty follows about the specialty store in between the legal framework as provided for by law.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Jung Steuereinheit Handbücher

Jung

Jung 4093 KRM TS D Bedienungsanleitung

Jung

Jung 4092 TSM Bedienungsanleitung

Jung

Jung 3091 TSM Bedienungsanleitung

Jung

Jung IPZ 1000 REG Bedienungsanleitung

Jung

Jung KNX 42911 ST Bedienungsanleitung

Jung

Jung 2072 TSM Bedienungsanleitung

Jung

Jung 4074 TSM Bedienungsanleitung

Jung

Jung 2224 TSM Bedienungsanleitung

Jung

Jung 5192KRMTSD Series Bedienerhandbuch

Jung

Jung 4074 TSM Bedienerhandbuch

Jung

Jung KNX 2193 REG Bedienungsanleitung

Jung

Jung WL 2200 REG Bedienungsanleitung

Jung

Jung KNX 5071 TSM Bedienungsanleitung

Jung

Jung 4091 TSM Bedienungsanleitung

Jung

Jung MSC 1000 KNX Bedienungsanleitung

Jung

Jung KNX 2114 REG Bedienungsanleitung

Jung

Jung 4008 TSM Montageanleitung

Jung

Jung 5071 RF TSM Bedienungsanleitung

Jung

Jung BT 1001 Series Bedienungsanleitung

Jung

Jung KNX 5071 TSM Bedienerhandbuch

Jung

Jung SM 1608 Bedienungsanleitung

Jung

Jung 30XX TSM Series Bedienungsanleitung

Jung

Jung KNX 4192 TSM Bedienungsanleitung

Jung

Jung KNX RF Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung