Jung FA10EB Bedienungsanleitung

Radio switch actuator, built-in

Radio Management

Radio switch actuator, built-in

Art. No. : FA10EB

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect device before working on it. At the same

time, take into account all circuit breakers that supply dangerous voltage to the device.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.

The load is not electrically isolated from the mains even when the device is switched off.

The radio communication takes place via a non-exclusively available transmission path,

and is therefore not suitable for safety-related applications, such as emergency stop and

emergency call.

Do not shorten, extend or strip the antenna. Device can be damaged.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

Figure 1

(1) Switch actuator

(2) Programming button

(3) LED

(4) Antenna

3 Function

System information

By statute, the transmitting power, the reception characteristics and the antenna cannot be

changed.

The range of a radio system from the transmitter to the receiver depends on various

circumstances.

1/5

82526923

J0082526923 09.09.2016

The range of the system can be optimised by selecting the optimal installation location, taking

into account the structural circumstances.

Figure 2: Reduced range due to structural obstacles

Intended use

- Radio-controlled switching of incandescent lamps, fluorescent lamps, HV halogen lamps

and Tronic or inductive transformers with halogen lamps

- Operation with suitable radio transmitters or with installation buttons as an extension

- Suitable for mixed operation up to the specified output (Technical data)

- Installation in false ceilings or surface mounting

iIt is not possible to teach a combination of presence detector and motion detector.

Product characteristics of the switch actuator

- Connection of installation buttons as extensions possible

- Light scene operation possible

- 2-point light control in combination with a radio presence detector possible

- Run-on time of approx. 1 minute in connection with radio motion detectors

4 Operation

Operation with radio transmitter

A radio transmitter has to be taught in order to be able to operate the actuator.

iObserve the instructions for the radio transmitter.

Switching light with installation button

oPress installation button briefly.

The light is switched on or off.

5 Information for electrically skilled persons

5.1 Fitting and electrical connection

DANGER!

Electrical shock when live parts are touched.

Electrical shocks can be fatal.

Before carrying out work on the device or load, disengage all the

corresponding circuit breakers. Cover up live parts in the working environment.

Connecting and mounting the device

Maintain a distance of at least 0.5 m from metal surfaces and electrical devices, e.g. microwave

ovens, hi-fi and TV systems, electronic ballasts or transformers.

2/5

82526923

J0082526923 09.09.2016

Radio Management

Radio switch actuator, built-in

Maintain a distance of at least 1 m between transmitter and receiver in order to prevent

overmodulation of the receiver.

Figure 3

oConnect the switch actuator (1) and if necessary the installation button (5) in accordance

with the connection diagram (figure 3).

iLay the antenna stretched out freely if possible.

oFitting the switch actuator.

oSwitch on mains voltage.

iThe load can be switched on or off by pressing the programming button briefly (for about

1 second).

5.2 Commissioning

iObserve the instructions for the radio transmitter.

DANGER!

Electrical shock when live parts are touched.

Electrical shocks can be fatal.

Before working on the device, cover up live parts in the working environment.

Teaching a radio transmitter

iIf all memory slots are occupied, a radio transmitter which has already been taught must

first be deleted. To do this, delete all taught channels and light scenes of the radio

transmitter individually.

The distance between the receiver and the radio transmitter is from 0.5 m to 5 m.

Load is switched off.

oPress the programming button of the switch actuator or the installation button for approx. 4

seconds.

iWhen the installation button is pressed the load is switched on for a duration of approx.

4 seconds.

The LED blinks. The device is in programming mode for approx. 1 minute.

oTrigger teach telegram on radio transmitter (see instructions for radio transmitter).

LED lights up. The radio transmitter has been taught.

oPress the programming button of the actuator or the installation button briefly.

Light switches on. The actuator is in operating mode.

3/5

82526923

J0082526923 09.09.2016

Radio Management

Radio switch actuator, built-in

iThe programming mode is exited automatically after about 1 minute.

i Teach light scene buttons separately.

iWhen a radio transmitter is taught, All On and All Off buttons that are present are

automatically also taught.

Deleting radio transmitters individually

oTeach the radio transmitter to be deleted again (see Teaching a radio transmitter).

LED blinks quickly. The radio transmitter has been deleted.

iIf several channels or light scenes of a radio transmitter have been taught, they all must be

deleted individually.

6 Appendix

6.1 Technical data

Rated voltage AC 230V~

Mains frequency 50 / 60Hz

Ambient temperature -20 ... +55°C

Circuit breaker max. 10A

Connected load

Incandescent lamps 2300W

HV halogen lamps 2300W

Inductive transformers 1000VA

Electronic transformers 1500W

Fluorescent lamps, uncompensated 1200VA

Fluorescent lamps, parallel compensated 920VA

Switching current 10A

Contact type µ contact

Dimensions L×W×H 175×42×18 mm

Radio frequency 433.05MHz ... 434.79MHz

Receiver category 2

Teachable radio transmitter max. 30

6.2 Troubleshooting

Device does not respond, or only sometimes.

Cause 1: battery in the radio transmitter is empty.

Change the battery in the radio transmitter.

Cause 2: Radio range exceeded. Structural obstacles reduce the range.

Check the installation situation.

Check routing of antenna. Laying the antenna stretched out increases the range.

Using a radio repeater.

6.3 Conformity

Albrecht Jung GmbH & Co. KG hereby declares that the radio system type

Art. No. FA10EB

corresponds to the directive 2014/53/EU. You can find the full article number on the device. The

complete text of the EU Declaration of Conformity is available under the Internet address:

www.jung.de/ce

6.4 Warranty

The warranty follows about the specialty store in between the legal framework as provided for

by law.

4/5

82526923

J0082526923 09.09.2016

Radio Management

Radio switch actuator, built-in

ALBRECHT JUNG GMBH & CO. KG

Volmestraße 1

58579 Schalksmühle

GERMANY

Telefon: +49 2355 806-0

Telefax: +49 2355 806-204

[email protected]

www.jung.de

5/5

82526923

J0082526923 09.09.2016

Radio Management

Radio switch actuator, built-in

Inhaltsverzeichnis

Andere Jung Schalten Handbücher

Jung

Jung A3181-1-01 Bedienungsanleitung

Jung

Jung Home Bedienungsanleitung

Jung

Jung LB management Bedienungsanleitung

Jung

Jung 3181-1 Series Bedienungsanleitung

Jung

Jung 1704ESE Bedienungsanleitung

Jung

Jung 3281-1 Series Bedienungsanleitung

Jung

Jung FMAS816REG Bedienungsanleitung

Jung

Jung KNX 4071.0 LED Series Bedienerhandbuch

Jung

Jung AS 1280-1 Series Bedienungsanleitung

Jung

Jung 10911ST Series Bedienungsanleitung

Jung

Jung 1704ESE Bedienungsanleitung

Jung

Jung DAW 360 WW Bedienungsanleitung

Jung

Jung 52921 ST Bedienungsanleitung

Jung

Jung 1180 Series Bedienungsanleitung

Jung

Jung 1202 URE Bedienungsanleitung

Jung

Jung FAS180 Series Bedienungsanleitung

Jung

Jung 567 S Series Bedienungsanleitung

Jung

Jung KNX 3281-1 Series Bedienungsanleitung

Jung

Jung 1701SE Bedienungsanleitung

Jung

Jung 10911STRF Series Bedienungsanleitung

Jung

Jung 1701PSE Bedienungsanleitung

Jung

Jung 1254 TSE Bedienungsanleitung

Jung

Jung FMAS10ZS Bedienungsanleitung

Jung

Jung 1701 SE Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung