Juniper SRX380 Montageanleitung

SRX380 Services Gateway Hardware Guide

Published

2020-03-31

Juniper Networks, Inc.

1133 Innovation Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in

the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks

are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right

to change, modify, transfer, or otherwise revise this publication without notice.

SRX380 Services Gateway Hardware Guide

The information in this document is current as of the date on the title page.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related

limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)

Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement

(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you

agree to the terms and conditions of that EULA.

Table of Contents

About the Documentation | vii

Documentation and Release Notes | vii

Using the Examples in This Manual | vii

Merging a Full Example | viii

Merging a Snippet | ix

Documentation Conventions | ix

Documentation Feedback | xii

Requesting Technical Support | xii

Self-Help Online Tools and Resources | xiii

Creating a Service Request with JTAC | xiii

Overview

SRX380 Services Gateway Overview | 15

Overview | 15

SRX380 Services Gateway FRUs | 16

Benefits of the SRX380 Services Gateway | 16

SRX380 Chassis | 17

SRX380 Chassis Overview | 17

SRX380 Front Panel | 17

Chassis Status LEDs | 19

Management Port and Network Port LEDs | 20

SRX380 Back Panel | 21

SRX380 Interface Modules Overview | 22

SRX380 Cooling System | 23

SRX380 Power System | 23

SRX380 Services Gateway Power Supply | 24

AC Power Supply LEDs on SRX380 Services Gateways | 25

Power Specifications for SRX380 Services Gateways | 25

AC Power Cord Specifications for SRX380 | 26

iii

Site Planning, Preparation, and Specifications

SRX380 Site Preparation Checklist | 29

SRX380 Site Guidelines and Requirements | 30

General Site Installation Guidelines for the SRX380 Services Gateway | 31

SRX380 Services Gateway Environmental Specifications | 31

SRX380 Services Gateway Electrical Wiring Guidelines | 32

SRX380 Services Gateway Physical Specifications | 33

SRX380 Services Gateway Clearance Requirements for Airflow and Hardware

Maintenance | 33

Rack Requirements | 34

Cabinet Requirements | 35

Initial Installation and Configuration

Unpacking and Mounting the SRX380 | 37

Unpacking the SRX380 Services Gateway | 37

Verifying Parts Received with the SRX380 Services Gateway | 38

Mounting the SRX380 Services Gateway in a Rack | 39

Connecting the SRX380 to Power | 42

Required Tools and Parts for Grounding the SRX380 Services Gateway | 42

Connecting the SRX380 Grounding Cable | 42

Connecting the SRX380 Services Gateway to an AC Power Supply | 44

Powering Off the SRX380 Services Gateway | 45

Connecting the SRX380 to External Devices | 47

Connecting an SRX380 to a Network for Out-of-Band Management | 47

Connecting an SRX380 to a Management Console by Using an RJ-45 Connector | 48

Connecting an SRX380 to a Management Console by Using the Mini-USB Type-B Console

Port | 49

Configuring Junos OS on the SRX380 | 50

Configure Root Authentication | 50

Plug and Play | 51

Configure the SRX380 Using J-Web | 52

Configuring the SRX380 Services Gateway Using CLI | 54

Maintaining Components

Maintaining SRX380 Components | 60

Routine Maintenance Procedures for the SRX380 Services Gateway | 60

Maintaining the SRX380 Services Gateway Cooling System Components | 60

Maintaining the SRX380 Services Gateway Power Supply | 60

Removing and Installing SRX380 Power System Components | 61

Remove an AC Power Supply on SRX380 Devices | 62

Install an AC Power Supply on SRX380 Devices | 63

Removing and Installing Mini-PIMs | 65

Remove a Mini-Physical Interface Module | 65

Install a Mini-Physical Interface Module | 66

Contacting Customer Support and Returning the Chassis or Components

Returning the SRX380 Chassis or Components | 69

Contacting Customer Support | 69

Returning an SRX380 Services Gateway or Component to Juniper Networks | 70

Locating the Chassis Serial Number | 70

Locating the Mini-PIM Serial Number Label | 71

Listing the SRX380 Services Gateway Component Details by Using the CLI | 71

Required Tools and Parts for Packing the SRX Series Services Gateway | 72

Packing the SRX Series Services Gateway for Shipment | 72

Packing SRX Series Services Gateway Components for Shipment | 73

Safety and Compliance Information

Definitions of Safety Warning Levels | 76

General Safety Guidelines and Warnings | 79

Restricted Access Warning | 81

Qualified Personnel Warning | 84

Prevention of Electrostatic Discharge Damage | 84

Fire Safety Requirements | 86

Fire Suppression | 86

Fire Suppression Equipment | 86

Laser and LED Safety Guidelines and Warnings | 87

General Laser Safety Guidelines | 87

Class 1 Laser Product Warning | 88

Class 1 LED Product Warning | 89

Laser Beam Warning | 90

Radiation from Open Port Apertures Warning | 91

Maintenance and Operational Safety Guidelines and Warnings | 92

Battery Handling Warning | 93

Jewelry Removal Warning | 94

Lightning Activity Warning | 96

Operating Temperature Warning | 97

Product Disposal Warning | 99

Action to Take After an Electrical Accident | 100

General Electrical Safety Guidelines and Warnings | 100

AC Power Electrical Safety Guidelines | 101

SRX380 Services Gateway Agency Approvals | 102

SRX380 Services Gateway EMC Requirements | 104

Canada | 104

European Community | 104

Israel | 104

Japan | 105

United States | 105

BSMI Statement (Taiwan) | 105

About the Documentation

IN THIS SECTION

Documentation and Release Notes | vii

Using the Examples in This Manual | vii

Documentation Conventions | ix

Documentation Feedback | xii

Requesting Technical Support | xii

Use this guide to install hardware and perform initial software configuration, routine maintenance, and

troubleshooting for the SRX380 Services Gateway. After completing the installation and basic configuration

procedures covered in this guide, refer to the Junos OS documentation for information about further

software configuration.

Documentation and Release Notes

To obtain the most current version of all Juniper Networks®technical documentation, see the product

documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.

If the information in the latest release notes differs from the information in the documentation, follow the

product Release Notes.

Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.

These books go beyond the technical documentation to explore the nuances of network architecture,

deployment, and administration. The current list can be viewed at https://www.juniper.net/books.

Using the Examples in This Manual

If you want to use the examples in this manual, you can use the load merge or the load merge relative

command. These commands cause the software to merge the incoming configuration into the current

candidate configuration. The example does not become active until you commit the candidate configuration.

vii

If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example

isafull example. In this case, use the load merge command.

If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In

this case, use the load merge relative command. These procedures are described in the following sections.

Merging a Full Example

To merge a full example, follow these steps:

1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the

file with a name, and copy the file to a directory on your routing platform.

For example, copy the following configuration to a file and name the file ex-script.conf. Copy the

ex-script.conf file to the /var/tmp directory on your routing platform.

system {

scripts {

commit {

file ex-script.xsl;

}

interfaces {

fxp0 {

disable;

unit 0 {

family inet {

address 10.0.0.1/24;

}

2. Merge the contents of the file into your routing platform configuration by issuing the load merge

configuration mode command:

[edit]

user@host# load merge /var/tmp/ex-script.conf

load complete

viii

Merging a Snippet

To merge a snippet, follow these steps:

1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the

file with a name, and copy the file to a directory on your routing platform.

For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the

ex-script-snippet.conf file to the /var/tmp directory on your routing platform.

commit {

file ex-script-snippet.xsl; }

2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode

command:

[edit]

user@host# edit system scripts

[edit system scripts]

3. Merge the contents of the file into your routing platform configuration by issuing the load merge

relative configuration mode command:

[edit system scripts]

user@host# load merge relative /var/tmp/ex-script-snippet.conf

load complete

For more information about the load command, see CLI Explorer.

Documentation Conventions

Table 1 on page x defines notice icons used in this guide.

Table 1: Notice Icons

DescriptionMeaningIcon

Indicates important features or instructions.Informational note

Indicates a situation that might result in loss of data or hardware

damage.

Caution

Alerts you to the risk of personal injury or death.Warning

Alerts you to the risk of personal injury from a laser.Laser warning

Indicates helpful information.Tip

Alerts you to a recommended use or implementation.Best practice

Table 2 on page x defines the text and syntax conventions used in this guide.

Table 2: Text and Syntax Conventions

ExamplesDescriptionConvention

To enter configuration mode, type

the configure command:

user@host> configure

Represents text that you type.Bold text like this

user@host> show chassis alarms

No alarms currently active

Represents output that appears on

the terminal screen.

Fixed-width text like this

•A policy term is a named structure

that defines match conditions and

actions.

•Junos OS CLI User Guide

•RFC 1997, BGP Communities

Attribute

•Introduces or emphasizes important

new terms.

•Identifies guide names.

•Identifies RFC and Internet draft

titles.

Italic text like this

Andere Handbücher für SRX380

Inhaltsverzeichnis

Andere Juniper Tor Handbücher

Juniper

Juniper SSG 500M Series Bedienungsanleitung

Juniper

Juniper SRX100 Bedienungsanleitung

Juniper

Juniper SRX300 Series Montageanleitung

Juniper

Juniper SRX4100 Einrichtungshandbuch

Juniper

Juniper SRX5400 Bedienungsanleitung

Juniper

Juniper SRX-4600 Bedienungsanleitung

Juniper

Juniper SRX220 Bedienungsanleitung

Juniper

Juniper SRX4100 Montageanleitung

Juniper

Juniper SRX100B Bedienungsanleitung

Juniper

Juniper SRX4200 Montageanleitung

Juniper

Juniper SRX300 Series Bedienungsanleitung

Juniper

Juniper SRX345 Bedienungsanleitung

Juniper

Juniper SRX110 Bedienungsanleitung

Juniper

Juniper SRX5400 Montageanleitung

Juniper

Juniper SRX 210 Bedienungsanleitung

Juniper

Juniper SRX1500 Einrichtungshandbuch

Juniper

Juniper SRX550 Bedienungsanleitung

Juniper

Juniper SRX 1400 SERVICES GATEWAY - Montageanleitung

Juniper

Juniper SRX320 Montageanleitung

Juniper

Juniper SRX 210 Bedienungsanleitung

Juniper

Juniper SRX3600 Montageanleitung

Juniper

Juniper SRX 5800 Bedienungsanleitung

Juniper

Juniper SRX320 Montageanleitung

Juniper

Juniper SRX550 Montageanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung