Juniper SSR120 Montageanleitung
SSR120 Hardware Guide
Published
2022-01-17
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in
the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks
are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publication without notice.
SSR120 Hardware Guide
Copyright © 2022 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related
limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)
Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement
(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you
agree to the terms and conditions of that EULA.
ii
Table of Contents
Overview
1
SSR120 Appliance Overview | 8
Overview | 8
Benefits of SSR120 | 8
SSR120 Models | 9
SSR120 Chassis | 10
Front Panel of an SSR120 | 10
Rear Panel of an SSR120 | 12
Chassis Status LEDs | 12
Network Port LEDs | 13
SSR120 Power System | 14
Cooling System | 14
LTE Support on SSR120 Appliances | 15
Overview | 15
Antennas | 16
Firmware Upgrade Support | 17
Site Planning, Preparation, and Specifications
2
Site Preparation Checklist for SSR120 | 19
SSR120 Site Guidelines and Requirements | 20
General Site Installation Guidelines | 21
Site Electrical Wiring Guidelines | 21
Chassis Physical Specifications for SSR120 | 22
Environmental Requirements and Specifications for SSR120 | 22
Clearance Requirements for Hardware Maintenance of SSR120 | 23
Requirements for Mounting an SSR120 Appliance on a Desktop or Other Level Surface | 24
iii
Rack Requirements for SSR120 | 24
Cable Specifications and Pinouts for SSR120 | 25
Console Port Connector Pinouts for SSR120 | 26
Pluggable Transceivers Supported on SSR120 | 26
Initial Installation and Configuration
3
Unpack and Mount an SSR120 | 28
Unpack an SSR120 | 28
Verify Parts Received with the SSR120 | 29
Register Products—Mandatory to Validate SLAs | 30
Mount an SSR120 on a Desk or Other Level Surface | 30
Mount an SSR120 on a Two-Post Rack | 31
Installing Antennas for the SSR120 Appliances that Support LTE | 33
Inserting the SIM Card | 34
Connect SSR120 to Power | 35
Connect Earth Ground to SSR120 | 35
Connect Power to SSR120 | 37
Power Off the SSR120 | 37
Connect SSR120 to External Devices | 38
Connect SSR120 to a Management Console | 39
Configuring SSR Software on the SSR120 | 40
Configure the SSR120 Appliance from the SSR Conductor | 40
QuickStart From the OTP ISO | 43
Contacting Customer Support and Returning the Chassis or Components
4
Contacting Customer Support and Returning the Chassis or Components | 50
How to Return a Hardware Component to Juniper Networks, Inc. | 50
Locating the Chassis Serial Number | 51
Contact Customer Support to Obtain Return Material Authorization | 51
Guidelines for Packing Hardware Components for Shipment | 52
iv
Safety and Compliance Information
5
Definitions of Safety Warning Levels | 55
General Safety Guidelines and Warnings | 58
Restricted Access Warning | 60
Qualified Personnel Warning | 63
Prevention of Electrostatic Discharge Damage | 63
Fire Safety Requirements | 65
Fire Suppression | 65
Fire Suppression Equipment | 65
Laser and LED Safety Guidelines and Warnings | 66
General Laser Safety Guidelines | 67
Class 1M Laser Product Warning | 68
Class 1M Laser Radiation Warning | 68
Class 1 Laser Product Warning | 69
Class 1 LED Product Warning | 70
Laser Beam Warning | 71
Unterminated Fiber-Optic Cable Warning | 72
Chassis and Component Lifting Guidelines | 74
Radiation from Open Port Apertures Warning | 75
Maintenance and Operational Safety Guidelines and Warnings | 76
Battery Handling Warning | 77
Jewelry Removal Warning | 78
Lightning Activity Warning | 80
Operating Temperature Warning | 81
Product Disposal Warning | 83
Action to Take After an Electrical Accident | 84
General Electrical Safety Guidelines and Warnings | 84
v
SSR120 Appliance Overview
IN THIS SECTION
Overview | 8
Benefits of SSR120 | 8
SSR120 Models | 9
Overview
The Juniper Networks SSR120 is a software-driven network appliance that is part of the SSR branch
portfolio. The SSR120 features four 1 GbE ports, two 1 GbE RJ-45/SFP combo ports, 8 GB of memory,
and a 120 GB enterprise-grade solid-state drive (SSD) for storage.
The SSR120 runs the FIPS 140-2 Level 1 compliant Session Smart Router (SSR) software, which provides
secure and resilient WAN connectivity.
The SSR120 appliance is available in models with or without LTE support.
Benefits of SSR120
The SSR120 provides these benefits:
8
•Zero Trust Security (ZTS)—The SSR120 ensures ZTS by authenticating all routes and encrypting all
session traffic. Applications, devices, or users cannot initiate any session that does not comply with the
authentication policies and access rules. The SSR120 supports session Layer 2 through Layer 5 stateful
firewall functions, including DoS/DDoS protection, NAT, encryption, VPN, and traffic filtering.
•Adaptive encryption—The SSR120 automatically detects traffic encrypted using HTTPs or IPSec and
does not reencrypt such traffic. This capability results in improved performance and reduced overhead
due to double encryption.
•Multipath routing and failsafe service delivery—Application and policy-based multipath routing, intelligent
path monitoring, and application delivery capabilities with no loss ensure that application traffic is
optimized across multiple paths and delivered despite failures.
•Wireless WAN support—In addition to Ethernet connections, Wireless WAN support through the LTE
module provides more flexibility in deployments.
SSR120 Models
The SSR120 is available in three different models, with or without LTE support.
NOTE: To use the SSR120 appliance, you must purchase the SSR software subscription license
sold separately.
Table 1: SSR120 Models
SSR120-AASSR120-AESSR120
8 GB8 GB8 GBRAM
120 GB SSD120 GB SSD120 GB SSDStorage
DesktopDesktopDesktopForm factor
Four 1-Gigabit Ethernet
ports
Two 1-Gigabit Ethernet
RJ-45/SFP combo ports
One USB 3.0 port
One RJ-45 Console port
Four 1-Gigabit Ethernet
ports
Two 1-Gigabit Ethernet
RJ-45/SFP combo ports
One USB 3.0 port
One RJ-45 Console port
Four 1-Gigabit Ethernet
ports
Two 1-Gigabit Ethernet
RJ-45/SFP combo ports
One USB 3.0 port
One RJ-45 Console port
Ports
9
Table 1: SSR120 Models (continued)
SSR120-AASSR120-AESSR120
OneOneOneFans
Yes (integrated LTE modem
for Asia Pacific, Australia, and
New Zealand)
Yes (integrated LTE modem
for North America and
Europe)
NoLTE support
SSR120 Chassis
IN THIS SECTION
Front Panel of an SSR120 | 10
Rear Panel of an SSR120 | 12
Chassis Status LEDs | 12
Network Port LEDs | 13
SSR120 Power System | 14
Cooling System | 14
Front Panel of an SSR120
Figure 1 on page 11 shows the front panel of an SSR120.
10
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Juniper Netzwerk-Hardware Handbücher
Juniper
Juniper JSA7800 Bedienungsanleitung
Juniper
Juniper Day One+ Bedienungsanleitung
Juniper
Juniper JSA1500-BSE Bedienungsanleitung
Juniper
Juniper CTP150 Bedienungsanleitung
Juniper
Juniper SSR1400 Montageanleitung
Juniper
Juniper IDP 800 Bedienungsanleitung
Juniper
Juniper MX150 Montageanleitung
Juniper
Juniper SSR1400 Bedienungsanleitung
Juniper
Juniper JSA7500 Bedienungsanleitung
Juniper
Juniper Day One Plus SRX380 Bedienungsanleitung
Juniper
Juniper CTP2000 Series Montageanleitung
Juniper
Juniper MX10016 Montageanleitung
Juniper
Juniper BTI7800 Series Installationsanleitung
Juniper
Juniper WX 3400 Bedienungsanleitung
Juniper
Juniper JATP700 Montageanleitung
Juniper
Juniper WX 1800 Bedienungsanleitung
Juniper
Juniper MX150 Bedienungsanleitung
Juniper
Juniper SRX320 Handbuch
Juniper
Juniper SSR1200 Bedienungsanleitung
Juniper
Juniper CTP1000 Series Montageanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
