Juniper CTP Series Montageanleitung

Juniper Networks CTP150 Circuit to Packet

Platform

Hardware Guide

Published

2020-02-07

Juniper Networks, In.

1133 Innovation Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc.

and/or its affiliates in the United States and other countries. All other trademarks may be property of their respective

owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right

to change, modify, transfer, or otherwise revise this publication without notice.

Juniper Networks CTP150 Circuit to Packet Platform Hardware Guide

Revision History

February 2020—Revision 4

The information in this document is current as of the date on the title page.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)

Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement

(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you

agree to the terms and conditions of that EULA.

Table of Contents

Overview

CTP150 Platform Overview | 3

Introducing CTP Series Platforms | 3

CTP150 Platform Overview | 3

CTP150 Interface Modules | 7

CTP150 Serial Interface Module | 7

CTP150 Multiservice Interface Module | 8

CTP150 T1/E1 Interface Module | 9

CTP150 Clock Module | 10

Planning

System Specifications and Certifications | 15

CTP150 Platform Specifications | 15

CTP150 Platform Certifications | 18

Planning and Preparing the Site | 21

Before You Install a CTP Platform | 21

CTP150 Environmental Requirements | 21

Equipment Rack Requirements | 23

CTP150 Rack Requirements | 23

CTP150 Mechanical Requirements | 23

CTP150 Space Requirements | 24

CTP150 Rack Installation | 24

CTP Cabling Recommendations | 25

Cable and Pinout Specifications | 27

CTP150 Interface Module HD-26 Connector Cable Pinouts | 27

EIA-530 Connector Interface Signal Pinouts (DB-25 Female DCE) | 28

EIA-530 Connector Interface Signal Pinouts (DB-25 Male DTE) | 29

iii

X.21 Connector Interface Signal Pinouts (DB-15 Female DCE) | 31

X.21 Connector Interface Signal Pinouts (DB-15 Male DTE) | 31

V.24 Connector Interface Signal Pinouts (RJ-45 Male) | 32

T1/E1 Interface Signal Pinouts (RJ-45 Male) | 33

CTP150 Console Cable Pinouts | 34

CTP Fast Ethernet and Power Cables | 36

Fast Ethernet Cables | 36

DC Power Cables | 36

Safety

General Safety Guidelines and Warnings | 39

CTP Safety Guidelines and Warnings | 39

Module Installation Safety Guidelines and Warnings | 41

Safety Guidelines and Warnings for Installing CTP Modules | 41

Hardware Compliance | 43

Declaration of Conformity for the CTP150 Platform | 43

Federal Communications Commission (FCC) Statement | 45

FCC Requirements for Consumer Products | 45

Food and Drug Administration, Center for Devices and Radiological Health | 46

Compliance with Canadian Regulations | 46

Industry Canada Notice | 47

Industry Canada Notice CS-03 | 47

Avis CS-03 d'Industrie Canada | 47

Canadian Department of Communications Explanatory Notes | 48

DOC Explanatory Notes: Equipment Attachment Limitations | 48

Notes explicatives du ministère des Communications: limites visant les accessoires | 49

Statements of Volatility for Juniper Network Devices | 50

Installation

Unpacking and Inspecting | 55

Before You Unpack the CTP Platform | 55

Unpacking the CTP Device | 55

Inspecting Platform Components and Accessories | 56

If You Detect or Suspect Damage | 57

Contacting Juniper Networks | 57

Installing the Chassis | 59

Before You Install the CTP150 Platform | 59

Installing the CTP150 Platform in Freestanding Mode | 60

Installing the CTP150 Platform in a Rack | 60

Installing Modules | 63

CTP150 Modules Slot and Port Numbering | 63

Protecting CTP150 Modules and Slots | 64

Required Tools and Safety Items for Installing CTP150 Modules | 64

Installing a CTP Interface Module, Processor Module, or Clock Module | 65

Removing a CTP Interface Module, Processor Module, or Clock Module | 66

Installing or Removing a CTP150 CompactFlash Card | 67

Cabling | 69

Cabling the CTP150 Platform Overview | 69

Required Tools, Wires, and Cables for the CTP150 Platform | 70

Cabling a CTP150 Interface Module | 71

CTP150 Fast Ethernet Cables | 71

Configuration

Accessing the CTP150 Platform | 75

Setting Up Management Access to the CTP150 Platform | 75

Connecting Directly to the CTP150 Platform | 75

Using HyperTerminal to Access the CTP150 Device | 76

Using SSH to Access the CTP Platform | 77

Powering On and Initially Configuring the CTP150 Device | 79

Before You Power On the CTP150 Device | 79

Powering On and Initially Configuring the CTP150 Device | 80

Powering On the CTP150 Device | 80

Configuring the First Boot Script for the CTP150 Device | 81

Powering Off the CTP Platform | 83

Maintenance

Maintaining Components | 87

Required Tools for Maintaining the CTP Platform | 87

Storing CTP Modules and Other Components | 87

Cleaning the CTP Platform | 88

Replacing an AC Power Supply | 89

Product Reclamation and Recycling | 91

Product Reclamation and Recycling Program | 91

Packing and Returning Hardware | 93

Return Procedure | 93

Returning CTP Products for Repair or Replacement | 94

Troubleshooting

Troubleshooting Power Failures | 97

CTP Platform Does Not Power On | 97

CTP Platform Shuts Down | 98

Contacting Customer Support | 99

Locating CTP Component Serial Numbers | 100

Information You Might Need to Supply to JTAC | 100

PART

Overview

CTP150 Platform Overview | 3

CTP150 Interface Modules | 7

CHAPTER 1

CTP150 Platform Overview

IN THIS CHAPTER

Introducing CTP Series Platforms | 3

CTP150 Platform Overview | 3

Introducing CTP Series Platforms

Juniper Networks CTP Series Circuit to Packet platforms provide advanced technology and features

required to reliably transport legacy time-division multiplexing (TDM) and other circuit-based applications

across next-generation IP networks. CTP Series platforms create an IP packet flow from a serial data or

analog voice connection at one end and provide the necessary processing to re-create the serial bit stream

or analog signal from the received packet flow at the other end.

CTP Series platforms provide compact and lightweight chassis, high port density, and multiple Ethernet

interfaces. Each CTP Series platform runs the CTP operating system (CTPOS) and can be managed by the

Juniper Networks CTPView Network Management System. The CTPView Network Management System

is a secure, Web-based management tool for provisioning, managing, running diagnostics, monitoring, and

reporting on all CTP Series devices and circuits in the network.

CTP150 Platform Overview

The Juniper Networks CTP150 Circuit to Packet platform is a 1-U high, full-rack wide chassis designed

for tabletop or shelf installation. It can also be installed in a rack with the supplied rack-mounting kit. The

CTP150 platform has two removable modules for serial interfaces, T1/E1 interfaces, or both, and a

removable Type II CompactFlash card, but no hard drive. It is available in a removable AC-powered version

only.

CAUTION: Do not remove CompactFlash cards from a running device. If you remove

the card while data is being written to or copied from the CompactFlash card, data

can be lost or corrupted. Therefore, we strongly recommend that you shut down the

device before removing or inserting a CompactFlash card.

The front panel comprises the following components (see Figure 1 on page 4):

•Power LED—Green when power is connected.

•CompactFlash LED—Solid amber when the CompactFlash drive is in use.

•Hardware LED—Quickly blinking red for a fan failure, slowly blinking red for the removable AC power

supply in use, and solid red when overheating.

•Serial console port—Provides access, by means of an RJ-45 connector, to the command-line interface

(CLI).

•Two traffic interface ports—Connect the appliance to your network, receiving and forwarding traffic,

over copper Ethernet 10/100/1000 interfaces.

•USB port.

•Slots for two removable interface modules in three versions:

•4-port serial interface

•4-port serial interface with multiservice daughter board

•4-port T1/E interface

NOTE: The module slots are numbered 0 and 1 from left to right. If only one module is used,

it must be inserted in slot 0. Also, any single clock module must be connected to the CLK

connector in the left-most module slot 0.

Figure 1: CTP150 Chassis (Front View)

CTP150

g004480

CONSOLE ETH1 ETH0

Power

LED

Hardware

LED

Serial

Console port

Traffic

interfaces:

Two copper Ethernet ports

(10/100/1000 Mbps)

USB

port

Flash disk LED

Interface module slots

Andere Handbücher für CTP Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Juniper Server Handbücher

Juniper

Juniper SSG-140-SB Bedienungsanleitung

Juniper

Juniper JSA7500 Einrichtungshandbuch

Juniper

Juniper SRX5600 Bedienungsanleitung

Juniper

Juniper SSG 500 Series Service-Handbuch

Juniper

Juniper WLM1200-RMTS Bedienungsanleitung

Juniper

Juniper TCA8000 Bedienerhandbuch

Juniper

Juniper SSG 520M Bedienungsanleitung

Juniper

Juniper JSA1500 Montageanleitung

Juniper

Juniper SSG5 Bedienungsanleitung

Juniper

Juniper CTP Series Bedienungsanleitung

Juniper

Juniper CTP151 Platform Montageanleitung

Juniper

Juniper MX480 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung