Juniper CTP151 Platform Montageanleitung
Juniper Networks CTP151 Circuit to Packet
Platform
Hardware Guide
Published
2020-02-07
Juniper Networks, In.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Copyright © 2020 Juniper Networks, Inc. All rights reserved.
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc.
and/or its affiliates in the United States and other countries. All other trademarks may be property of their respective
owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publication without notice.
Juniper Networks CTP151 Circuit to Packet Platform Hardware Guide
Revision History
February 2020—Revision 1
The information in this document is current as of the date on the title page.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)
Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement
(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you
agree to the terms and conditions of that EULA.
ii
Table of Contents
About the Documentation | vii
Documentation and Release Notes | vii
Documentation Conventions | vii
Documentation Feedback | x
Requesting Technical Support | x
Self-Help Online Tools and Resources | xi
Creating a Service Request with JTAC | xi
Overview
1
CTP151 Platform Overview | 3
Introducing CTP Series Platforms | 3
CTP151 Platform Overview | 3
LED Details of CTP151 Platform | 5
Chassis Status LEDs | 5
CTP151 Cooling System | 7
Power Supply in the CTP151 Device | 8
CTP151 Interface Modules | 9
CTP151 Serial Interface Module | 9
CTP151 Multiservice Interface Module | 10
CTP151 T1/E1 Interface Module | 12
Planning
2
System Specifications | 17
CTP151 Platform Chassis Physical Specifications | 17
Planning and Preparing the Site | 19
General Site Guidelines | 19
Environmental Requirements and Specifications | 19
Site Electrical Wiring Guidelines | 20
Clearance Requirements for Airflow and Hardware Maintenance for a CTP151 Device | 21
iii
Rack Requirements for a CTP151 Device | 23
Cabinet Requirements for a CTP151 Device | 24
CTP Cabling Recommendations | 25
Cable and Pinout Specifications | 27
Cable Specifications for Console Connections for the CTP151 Device | 27
Mini-USB Type-B Console Port Specifications for a CTP151 Device | 28
Console Port Connector Pinouts for a CTP151 Device | 29
USB Port Specifications for a CTP151 Device | 30
Management Port Connector Pinout Information for the CTP151 Device | 31
Network Port Connector Pinout Information for a CTP151 Device | 31
RJ-45 to DB-9 Serial Port Adapter Pinout Information for a CTP151 Device | 32
CTP151 Interface Module HD-26 Connector Cable Pinouts | 33
EIA-530 Connector Interface Signal Pinouts (DB-25 Female DCE) | 34
EIA-530 Connector Interface Signal Pinouts (DB-25 Male DTE) | 35
X.21 Connector Interface Signal Pinouts (DB-15 Female DCE) | 37
X.21 Connector Interface Signal Pinouts (DB-15 Male DTE) | 37
V.24 Connector Interface Signal Pinouts (RJ-45 Male) | 38
T1/E1 Interface Signal Pinouts (RJ-45 Male) | 39
Safety
3
General Safety Guidelines and Warnings | 43
CTP151 Safety Guidelines and Warnings | 43
Module Installation Safety Guidelines and Warnings | 45
Safety Guidelines and Warnings for Installing CTP151 Modules | 45
Hardware Compliance and Homologation | 47
Agency Approvals for the CTP151 Platform | 47
iv
Installation
4
Unpacking and Mounting the CTP151 Device | 51
Unpacking a CTP151 Device | 51
Parts Inventory (Packing List) for a CTP151 Device | 52
Registering Products—Mandatory for Validating SLAs | 53
Mounting a CTP151 Device on Two Posts in a Rack | 53
Installing Modules | 57
CTP151 Modules Slot and Port Numbering | 57
Protecting CTP Modules and Slots | 57
Required Tools and Safety Items for Installing CTP Modules | 58
Installing a CTP Interface Module, Processor Module, or Clock Module | 59
Removing a CTP Interface Module, Processor Module, or Clock Module | 61
Cabling | 65
Connecting a CTP151 Device to a Network for Out-of-Band Management | 65
Connecting a CTP151 Device to a Management Console | 66
Connecting a CTP151 Device to a Management Console Using Mini-USB Type-B Console Port | 67
Cabling a CTP151 Interface Module | 68
Configuration
5
Accessing the CTP151 Platform | 73
Using HyperTerminal to Access the CTP151 Device | 73
Using SSH to Access the CTP151 Device | 74
Powering On and Initially Configuring the CTP151 Device | 75
Powering On the CTP151 Device | 75
Bringing Up the CTP151 with CTPOS on Internal SSD | 76
Configuring the First Boot Script for the CTP151 Device | 77
Powering Off the CTP151 Device | 80
v
Maintenance
6
Maintaining Components | 83
Required Tools for Maintaining the CTP151 Device | 83
Storing CTP Modules and Other Components | 83
Cleaning the CTP151 Platform | 84
Removing the CTP151 Device from a Rack or Cabinet | 85
Product Reclamation and Recycling | 87
Product Reclamation and Recycling Program | 87
Contacting Customer Support and Returning the Chassis or Components | 89
Returning a CTP151 Device or Component for Repair or Replacement | 89
Locating the Chassis Serial Number ID Label on a CTP151 Device | 90
Contacting Customer Support to Obtain a Return Materials Authorization for a CTP151 Device | 90
Packing a CTP151 Device or Component for Shipping | 91
Packing a CTP151 Device for Shipping | 92
Packing CTP151 Device Components for Shipping | 92
Troubleshooting
7
Troubleshooting Hardware and Power Failures | 97
Understanding Alarm Types and Severity Levels on the CTP151 Device | 97
CTP151 Platform Does Not Power On | 98
CTP151 Platform Shuts Down | 99
vi
About the Documentation
IN THIS SECTION
Documentation and Release Notes | vii
Documentation Conventions | vii
Documentation Feedback | x
Requesting Technical Support | x
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation, see the product
documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the documentation, follow the
product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.
These books go beyond the technical documentation to explore the nuances of network architecture,
deployment, and administration. The current list can be viewed at https://www.juniper.net/books.
Documentation Conventions
Table 1 on page viii defines notice icons used in this guide.
vii
Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware
damage.
Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page viii defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type
the configure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on
the terminal screen.
Fixed-width text like this
•A policy term is a named structure
that defines match conditions and
actions.
•Junos OS CLI User Guide
•RFC 1997, BGP Communities
Attribute
•Introduces or emphasizes important
new terms.
•Identifies guide names.
•Identifies RFC and Internet draft
titles.
Italic text like this
viii
Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
Configure the machine’s domain
name:
[edit]
root@# set system domain-name
domain-name
Represents variables (options for
which you substitute a value) in
commands or configuration
statements.
Italic text like this
•To configure a stub area, include
the stub statement at the [edit
protocols ospf area area-id]
hierarchy level.
•The console port is labeled
CONSOLE.
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy
levels; or labels on routing platform
components.
Text like this
stub <default-metric metric>;Encloses optional keywords or
variables.
< > (angle brackets)
broadcast | multicast
(string1 |string2 |string3)
Indicates a choice between the
mutually exclusive keywords or
variables on either side of the symbol.
The set of choices is often enclosed
in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamic MPLS
only
Indicates a comment specified on the
same line as the configuration
statement to which it applies.
# (pound sign)
community name members [
community-ids ]
Encloses a variable for which you can
substitute one or more values.
[ ] (square brackets)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
Identifies a level in the configuration
hierarchy.
Indention and braces ( { } )
Identifies a leaf statement at a
configuration hierarchy level.
; (semicolon)
GUI Conventions
ix
Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
•In the Logical Interfaces box, select
All Interfaces.
•To cancel the configuration, click
Cancel.
Represents graphical user interface
(GUI) items you click or select.
Bold text like this
In the configuration editor hierarchy,
select Protocols>Ospf.
Separates levels in a hierarchy of
menu selections.
>(bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback so that we can improve our documentation. You can use either
of the following methods:
•Online feedback system—Click TechLibrary Feedback, on the lower right of any page on the Juniper
Networks TechLibrary site, and do one of the following:
•Click the thumbs-up icon if the information on the page was helpful to you.
•Click the thumbs-down icon if the information on the page was not helpful to you or if you have
suggestions for improvement, and use the pop-up form to provide feedback.
•E-mail—Send your comments to [email protected]. Include the document or topic name,
URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance Center (JTAC).
If you are a customer with an active Juniper Care or Partner Support Services support contract, or are
x
Andere Handbücher für CTP151 Platform
1
Inhaltsverzeichnis
Andere Juniper Server Handbücher
Juniper
Juniper SSG 520M Bedienungsanleitung
Juniper
Juniper SSG5 Bedienungsanleitung
Juniper
Juniper MX480 Bedienungsanleitung
Juniper
Juniper CTP Series Bedienungsanleitung
Juniper
Juniper WLM1200-RMTS Bedienungsanleitung
Juniper
Juniper TCA8000 Bedienerhandbuch
Juniper
Juniper SSG-140-SB Bedienungsanleitung
Juniper
Juniper SRX5600 Bedienungsanleitung
Juniper
Juniper JSA1500 Montageanleitung
Juniper
Juniper SSG 500 Series Service-Handbuch
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung