JVC GET0260-015A Bedienungsanleitung

CD RECEIVER

KD-G312

INSTRUCTIONS

GET0260-015A

[B]

For canceling the display demonstration, see page 7.

Cover_KD-G312[B]f.indd 2Cover_KD-G312[B]f.indd 2 6/7/05 5:42:20 PM6/7/05 5:42:20 PM

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the unit while driving,

be sure to look ahead carefully or you may

be involved in a traffic accident.

How to reset your unit

• This will reset the microcomputer. Your

preset adjustments will also be erased.

• If a disc is loaded, it will eject. Be careful

not to drop the disc.

How to forcibly eject a disc

If a disc cannot be recognized by the unit or

cannot be ejected, ejects the disc as follows.

• If this does not work, try to reset your unit.

• Be careful not to drop the disc when it

ejects.

For security reasons, a numbered ID card is provided with this unit, and the same ID number is

imprinted on the unit’s chassis. Keep the card in a safe place, as it will help the authorities to

identify your unit if stolen.

EN02-05_KD-G312[B]f.indd 2EN02-05_KD-G312[B]f.indd 2 6/7/05 5:43:05 PM6/7/05 5:43:05 PM

How to reset your unit ........................... 2

How to forcibly eject a disc................... 2

How to read this manual........................ 4

How to use the MODE button ............... 4

How to detach/attach the control

panel................................................... 4

Control panel — KD-G312 ......... 5

Parts identification................................. 5

Getting started....................... 6

Basic operations ........................... 6

Canceling the display demonstrations ... 7

Setting the clock .................................... 7

Radio operations ................... 8

Listening to the radio........................... 8

Storing stations in memory.................... 8

Listening to a preset station ................... 9

FM RDS operations.................10

Searching for your favorite FM RDS

programme

....................................... 10

Storing your favorite programmes......... 10

Using the standby receptions................. 11

Tracking the same programme

—Network-Tracking Reception ........ 11

Disc operations ...................... 12

Playing a disc ..................................... 12

Changing the display information ......... 13

Selecting the playback modes................ 14

Sound adjustments ................ 15

Selecting preset sound modes

(C-EQ: custom equalizer) .................. 15

Adjusting the sound ............................... 15

General settings — PSM .........16

Basic procedure ..................................... 16

Using the remote controller

— RM-RK60............................ 18

Main elements and features ................... 18

Maintenance .......................... 19

More about this unit............... 20

Troubleshooting ..................... 22

Specifications ......................... 23

For safety....

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Contents

Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

EN02-05_KD-G312[B]f.indd 3EN02-05_KD-G312[B]f.indd 3 6/7/05 5:43:06 PM6/7/05 5:43:06 PM

How to read this manual

The following methods are used to make the

explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this unit” (see page 20).

• Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

How to use the MODE button

If you press MODE, the unit goes into functions

mode, then the number buttons and ¢/

4buttons work as different function

buttons.

Ex.: When number button 2 works as

MO (monaural) button.

Time countdown indicator

To use these buttons for original functions

again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared.

• Pressing MODE again also clears the

functions mode.

How to detach/attach the control panel

Detaching....

Attaching....

EN02-05_KD-G312[B]f.indd 4EN02-05_KD-G312[B]f.indd 4 6/22/05 8:56:41 AM6/22/05 8:56:41 AM

Control panel — KD-G312

Parts identification

1+/– buttons

2DISP (display) button

3Loading slot

4Display window

5MODE button

60(eject) button

7¢/4buttons

8(standby/on/attenuator) button

9SEL (select) button

pRemote sensor

• You can control this unit with an

optionally purchased remote controller.

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

qEQ (equalizer) button

wMO (monaural) button

eSSM (Strong-station Sequential Memory)

button

rCD button

tFM/AM button

yRPT (repeat) button

uRND (random) button

iT/P (traffic programme/programme type)

button

o(control panel release) button

;Number buttons

Display window

aTuner reception indicators—MO (monaural),

ST (stereo)

sWMA indicator

dRDS indicators—TP, PTY, AF, REG

fMP3 indicator

gCD indicator

hPlayback mode / item indicators—

RND (random), (disc), (folder),

RPT (repeat)

jLOUD (loudness) indicator

kEQ (equalizer) indicator

lSound mode (C-EQ: custom equalizer)

indicators—ROCK, CLASSIC, POPS,

HIP HOP, JAZZ, USER

• also works as the time countdown

indicator.

/Disc information indicators—TAG (ID3

Tag), (folder), (track/file)

zMain display

xSource display / Volume level indicator

cTr (track) indicator

Display window

EN02-05_KD-G312[B]f.indd 5EN02-05_KD-G312[B]f.indd 5 6/7/05 5:43:07 PM6/7/05 5:43:07 PM

Getting started

Basic operations

You cannot select “CD” as the playback

source if there is no disc in the loading

slot.

Volume level appears.

Volume level indicator

⁄Adjust the sound as you want.

(See page 15.)

To drop the volume in a moment (ATT)

To restore the sound, press it

again.

To turn off the power

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

EN06-11_KD-G312[B]f.indd 6EN06-11_KD-G312[B]f.indd 6 6/7/05 5:42:27 PM6/7/05 5:42:27 PM

Canceling the display

demonstrations

If no operations are done for about 20 seconds,

display demonstration starts.

[Initial: DEMO ON]—see page 16.

4Finish the procedure.

To activate the display demonstration

In step 3above...

Setting the clock

2Set the hour, minute, and clock

system.

1Select “CLOCK H” (hour), then

adjust the hour.

2Select “CLOCK M” (minute),

then adjust the minute.

3Select “24H/12H,” then select

“24H” (hour) or “12H” (hour).

3Finish the procedure.

To check the current clock time when the

power is turned off

EN06-11_KD-G312[B]f.indd 7EN06-11_KD-G312[B]f.indd 7 6/7/05 5:42:28 PM6/7/05 5:42:28 PM

When an FM stereo broadcast is hard to

receive

Lights up when monaural mode is activated.

Reception improves, but stereo effect will

be lost.

To restore the stereo effect, repeat the same

procedure so that the MO indicator goes off.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting—

SSM (Strong-station Sequential

Memory)

1Select the FM band (FM1 – FM3)

you want to store into.

Radio operations

Listening to the radio

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Selected band appears.

ŸStart searching for a station.

When a station is received, searching

stops.

To stop searching, press the same

button again.

To tune in to a station manually

In step Ÿabove...

2Select the desired station frequencies.

EN06-11_KD-G312[B]f.indd 8EN06-11_KD-G312[B]f.indd 8 6/22/05 8:51:00 AM6/22/05 8:51:00 AM

“SSM” flashes, then disappears when

automatic presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into the

preset number 4 of the FM1 band.

Preset number flashes for a while.

Listening to a preset station

2Select the preset station (1 – 6) you

want.

To check the current clock time while

listening to an FM (non-RDS) or AM station

• For FM RDS stations, see page 11.

EN06-11_KD-G312[B]f.indd 9EN06-11_KD-G312[B]f.indd 9 6/7/05 5:42:29 PM6/7/05 5:42:29 PM

What you can do with RDS

RDS (Radio Data System) allows FM

stations to send an additional signal along

with their regular programme signals.

By receiving the RDS data, this unit can do

the following:

•

Programme Type (PTY) Search (see left

column)

• Temporarily switches to Traffic

Announcement—TA Standby Reception

(see page 11)

•

Temporarily switches to your favorite

programme—PTY Standby Reception (see

pages 11 and 17)

•

Tracing the same programme automatically

—Network-Tracking Reception (see page 11)

• Programme Search (see page 17)

Storing your favorite programmes

You can store six favorite programme types.

Preset programme types in the number buttons

(1 to 6):

1Select a PTY code (see page 11).

2Select the preset number (1 – 6) you

want to store into.

Ex.: When “ROCK M” is selected

3Repeat steps 1and 2to store

other PTY codes into other preset

numbers.

You can tune in to a station broadcasting your

favorite programme by searching for a PTY code.

•

To store your favourite programme, see the

following.

The last selected PTY

code appears.

ŸSelect one of your favorite

programme type.

Select one of the twenty-nine PTY

codes.

!Start searching for your favorite

programme.

If there is a station broadcasting a

programme of the same PTY code as you

have selected, that station is tuned in.

FM RDS operations

Searching for your favorite FM

RDS programme

EN06-11_KD-G312[B]f.indd 10EN06-11_KD-G312[B]f.indd 10 6/7/05 5:42:29 PM6/7/05 5:42:29 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung