JVC KD-AR870 Bedienungsanleitung
ENGLISH
ESPAÑOL
FRANÇAIS
CD RECEIVER KD-AR870/KD-G820
RECEPTOR CON CD KD-AR870/KD-G820
RECEPTEUR CD KD-AR870/KD-G820
For canceling the display demonstration, see page 8.
Para cancelar la demostración en pantalla, consulte la página 8.
Pour annuler la démonstration des affichages, référez-vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las cone iones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.
Model No.
Serial No.
GET0359-001A
[J]
Cover_KD-AR870_820[J]1.indd 2Cover_KD-AR870_820[J]1.indd 2 5/12/05 4:54:26 pm5/12/05 4:54:26 pm
2
ENGLISH
How to forcibly eject a disc
“Please Eject” appears on the display.
• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.
How to reset your unit
Your preset adjustments will also be erased.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your co plete understanding and to
obtain the best possible perfor ance fro the unit.
INFORMATION (For U.S.A.
This equip ent has been tested and found to co ply with the li its for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These li its are designed to provide reasonable protection
against har ful interference in a residential installation. This equip ent generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
ay cause har ful interference to radio co unications. However, there is no guarantee that
interference will not occur in a particular installation. If this equip ent does cause har ful
interference to radio or television reception, which can be deter ined by turning the equip ent
off and on, the user is encouraged to try to correct the interference by one or ore of the
following easures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equip ent and receiver.
– Connect the equip ent into an outlet on a circuit different fro that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to bea .
Caution:
Changes or odifications not approved by JVC could void the user ’s authority to operate the
equip ent.
EN02-07KD-AR870G820[J]2.indd 2EN02-07KD-AR870G820[J]2.indd 2 9/12/05 4:38:38 pm9/12/05 4:38:38 pm
ENGLISH
3
CONTENTS
Control panel — KD-AR870 and KD-G820 ....... 5
Remote controller — RM-RK50 ................. 6
Getting started ................................. 7
Basic operations ................................................... 7
Radio operations ..............................
Disc/USB memory operations ............. 11
Playing a disc in the unit ...................................... 11
Playing discs in the CD changer ............................ 11
Playing a USB memory ......................................... 12
Sound adjustments ........................... 16
General settings — PSM ................... 18
Title assignment ............................... 27
Satellite radio operations .................. 28
iPod®/D. player operations ................ 32
Other external component
operations .................................... 34
More about this unit ......................... 35
Maintenance .................................... 3
Troubleshooting ............................... 40
Specifications ................................... 45
For safety...
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.
How to use the MODE/SEL button
If you use MOD or S L (select), the display
and some controls (such as the number buttons,
4/¢ buttons, 5/∞ buttons, and the
control dial) enter the corresponding control
mode.
x.: When you press number button 1 after
pressing MOD , to operate the FM
tuner.
Works as time countdown indicator.
To use these controls for original functions
again, wait for 15 seconds without pressing any
of these buttons until the control is cleared.
• Pressing MOD again also restores original
functions. However, pressing S L makes the
unit enters a different mode.
EN02-07KD-AR870G820[J]2.indd 3EN02-07KD-AR870G820[J]2.indd 3 9/12/05 10:55:07 am9/12/05 10:55:07 am
4
ENGLISH
How to read this manual
• Button operations are ainly explained with
the illustrations in the table below.
• So e related tips and notes are explained in
“More about this unit” (see pages 35 – 38).
Press briefly.
Press repeatedly.
Press either
one.
Press and hold until your
desired response begins.
Press and hold both
buttons at the sa e ti e.
The following arks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
: External USB e ory operations.
Caution:
If the te perature inside the car is below
0°C, the ove ent of ani ation and text
scroll will be halted on the display to prevent
the display fro being blurred.
appears on the display.
When the te perature increases, and the
operating te perature is resu ed, these
functions will start working again.
Warning:
If you need to operate the unit while driving,
be sure to look ahead carefully or you ay be
involved in a traffic accident.
Caution on volume setting:
Discs produce very little noise co pared
with other sources. Lower the volu e
before playing a disc to avoid da aging
the speakers by the sudden increase of the
output level.
EN02-07KD-AR870G820[J]1.indd 4EN02-07KD-AR870G820[J]1.indd 4 5/12/05 4:52:28 pm5/12/05 4:52:28 pm
ENGLISH
5
1 BAND button
2 • Control dial
• (standby/on attenuator) button
3 DISP (display) button
4 Remote sensor
• DO NOT expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
5 Display window
6 5 (up) / ∞ (down) buttons
Parts i entification
Control panel — KD-AR870 and KD-G820
7 EQ (equalizer) button
8 0 (eject) button
9 USB (Universal Serial Bus) input terminal
p SRC (source) button
q (control panel release) button
w SEL (select) button
e MODE button
r Number buttons
t 4/¢ buttons
How to etach/attach the control panel
Detaching... Attaching...
CAUTION:
The lever comes out if you pressed the 0 button while
the panel is detached If this happens, push the lever back
into lock position before attaching the panel
ever
EN02-07KD-AR870G820[J]2.indd 5EN02-07KD-AR870G820[J]2.indd 5 9/12/05 9:50:35 am9/12/05 9:50:35 am
6
ENGLISH
Caution:
Main elements and features
1 (standby/on/attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 5 U (up) / D (down) ∞ buttons
• Changes the FM/AM bands with 5 U.
• Changes the preset stations with D ∞.
• Changes the folder of the MP3/WMA/
USB.
• While playing an MP3 disc on an
MP3-co patible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to the satellite (SIRIUS or
XM) radio:
– Changes the categories.
Remote controller — RM-RK50
Installing the lithium coin battery
(CR2025
Aim the remote controller directly at the
remote sensor on the unit. Make sure there is
no obstacle in between.
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it ay
explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery fro over-heating,
cracking, or starting a fire:
– Do not recharge, short, disasse ble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
etallic aterials.
– Do not poke the battery with tweezers or
si ilar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
EN02-07KD-AR870G820[J]1.indd 6EN02-07KD-AR870G820[J]1.indd 6 5/12/05 4:52:30 pm5/12/05 4:52:30 pm
ENGLISH
7
Getting started
Basic operations
~ Turn on the power.
Ÿ
*1 Only for KD-AR870.
*2 You cannot select these sources if they
are not ready or not connected.
!
• For FM/AM tuner
• For S R US tuner
• For XM tuner
⁄ Adjust the volume.
@ Adjust the sound as you want. (See
pages 16 – 18.)
• While listening to an Apple iPod® or a
JVC D. player:
– Pauses/stops or resu es playback with
D ∞.
– Enters the ain enu with 5 U. (Now
5 U/D ∞/2 R/F 3 work as the enu
selecting buttons.)*
3 VOL – / VOL + buttons
• Adjusts the volu e level.
4 SOUND button
• Selects the sound ode (i-EQ: intelligent
equalizer).
5 SOURCE button
• Selects the source.
6 2 R (reverse) / F (forward) 3 buttons
• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks if pressed briefly.
• While listening to the satellite radio:
– Changes the channels if pressed briefly.
– Changes the channels rapidly if pressed
and held.
• While listening to an iPod or a D. player
(in enu selecting ode):
– Selects an ite if pressed briefly. (Then,
press D ∞ to confir the selection.)
– Skips 10 ite s at a ti e if pressed and
held.
* 5 U: Returns to the previous menu.
D ∞: Confirms the selection.
Continued on next page...
EN02-07KD-AR870G820[J]1.indd 7EN02-07KD-AR870G820[J]1.indd 7 5/12/05 4:52:31 pm5/12/05 4:52:31 pm
8
ENGLISH
To check the current clock time when the
power is turned off
Changing the display pattern
Ex.: When tuner is selected as the source
Source operation display
“SMALL” (CD jac et image) graphic*1 is displayed.
“LARGE” (full display size) graphic*1 is displayed.
Audio level meter is displayed (see “LevelMeter” on page 19).
Goes bac to the initial display pattern.
*1 You can use your edited file for graphic screen
(see pages 22 – 25).
Depending on a downloaded file, it may take
a longer time to show it on the display.
*2 The information ar will disappear if no
operation is performed for five seconds.
To drop the volume in a moment (ATT)
To restore the sound, press it
again.
To turn off the power
Basic settings
• See also “General settings — PSM” on pages
18 – 21.
1
2-1 Canceling the display
demonstrations
Turn the control dial to set “ emo/Link”
to “Off.”
2-2 Setting the clock
1 Press number button 4 ( ).
“Clock Hr” (hour) appears. Then,
turn the control dial to adjust the
hour.
2 Press ¢ to select “Clock Min”
(minute). Then, turn the control
dial to adjust the minute.
3 Press ¢ to select “24H/12H.”
Then, turn the control dial to select
“12Hours” or “24Hours,” time
display mode.
3 Exit from the setting.
*2
EN08-15KD-AR870G820[J]f.indd 8EN08-15KD-AR870G820[J]f.indd 8 20/12/05 3:44:53 pm20/12/05 3:44:53 pm
9
ENGLISH
When an FM stereo roadcast is hard to
receive
1
2
3 Exit from the setting.
lights up on the display.
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, select “Mono Off”
in step 2. goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 FM3) you
want to store into.
2
Radio operations
~
Ÿ
! Start searching for a station.
When a station is received, searching
stops.
• When receiving an FM stereo broadcast
with sufficient signal strength,
lights up on the display.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! above...
1
2 Select a desired station frequency.
Continued on next page...
EN08-15KD-AR870G820[J]1.indd 9EN08-15KD-AR870G820[J]1.indd 9 5/12/05 4:52:47 pm5/12/05 4:52:47 pm
10
ENGLISH
3 Select “SSM.”
4
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
Using the num er uttons
1
2
3
Using the Preset Station List
• When appears on the display, you can
move back to the previous display by pressing
number button 3.
1 Follow steps 1 and 2 on left column.
• By holding 5 / ∞, the Preset Station List
will appear (go to step 4 below).
2
3 Display the Preset Station List.
4 Select the preset number you want to
store into.
• You can move to the lists of the other FM
bands by pressing number button 5
() or 6 ( ) repeatedly.
5 Store the station.
EN08-15KD-AR870G820[J]1.indd 10EN08-15KD-AR870G820[J]1.indd 10 5/12/05 4:52:48 pm5/12/05 4:52:48 pm
Andere Handbücher für KD-AR870
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere JVC Autoempfänger Handbücher
JVC
JVC KD A60S Bedienungsanleitung
JVC
JVC KD-G725 Bedienungsanleitung
JVC
JVC KD-R471 Bedienungsanleitung
JVC
JVC KD-AVX1 Leitfaden
JVC
JVC GET0558-001A Leitfaden
JVC
JVC KW-XR810 Bedienungsanleitung
JVC
JVC KD-G801 Bedienungsanleitung
JVC
JVC KD-SX975 Bedienungsanleitung
JVC
JVC KW-V820BTM Bedienungsanleitung
JVC
JVC KD-A95BT Leitfaden
JVC
JVC KD-DV4406 Bedienungsanleitung
JVC
JVC KD-AHD59 - Radio / HD Bedienungsanleitung
JVC
JVC KD-SHX705 Bedienungsanleitung
JVC
JVC KW-V50BT Bedienungsanleitung
JVC
JVC KD-G335 Bedienungsanleitung
JVC
JVC KD-AR480 Bedienungsanleitung
JVC
JVC KW-XR610 Leitfaden
JVC
JVC KD-PDR41 Bedienungsanleitung
JVC
JVC KS-FX822R Bedienungsanleitung
JVC
JVC KD-AR560 Bedienungsanleitung
Beliebte Autoempfänger Handbücher anderer Marken
Sound Storm
Sound Storm STM93R Bedienungsanleitung
Soundstream
Soundstream VIR-5000 Bedienungsanleitung
Avson
Avson MKT Platform Bedienungsanleitung
Sony
Sony MEX-1HD - Audio Library System Bedienungsanleitung
Pioneer
Pioneer DVH-P500UB Bedienungsanleitung
Blaupunkt
Blaupunkt SANTIAGO CR 87 Bedienungsanleitung
