JVC KD-DB52 Bedienungsanleitung

ENGLISH

FRANÇAIS

DEUTSCH

INSTRUCTIONS

LVT2221-001B

[E]

CD RECEIVER / RÉCEPTEUR CD / CD-RECEIVER

Only for KD-DB52 /

Uniquement pour le KD-DB52 /

Nur bei KD-DB52:

For canceling the display demonstration, see page 4. /

Pour annuler la démonstration des achages, référez-vous à la page 4. /

Zum Abbrechen der Displaydemonstration siehe Seite 4.

KD-DB52/KD-DB42

For installation and connections, refer to the separate manual.

Pour l’installation et les raccordements, se référer au manuel séparé.

Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.

MANUEL D’INSTRUCTIONS

BEDIENUNGSANLEITUNG

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2.CAUTION:

Donot open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualied service personnel.

3.CAUTION:

Visible and/or invisible class 1M laser radiation when open. Do not view directly with

optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Information for Users on Disposal of

Old Equipment and Batteries

[European Union only]

These symbols indicate that the product and the

battery with this symbol should not be disposed

as general household waste at its end-of-life.

If you wish to dispose of this product and the

battery, please do so in accordance with

applicable national legislation or other rules in

your country and municipality.

By disposing of this product correctly, you will

help to conserve natural resources and will help

prevent potential negative eects on the

environment and human health.

Notice:

The sign Pb below the symbol for batteries

indicates that this battery contains lead.

Products

Battery

Warning:

Stop the car before operating the unit.

Caution:

Adjust the volume so that you can hear sounds

outside the car. Driving with the volume too high

may cause an accident.

Avoid using the USB device or iPod/iPhone if it

might hinder driving safety.

Caution on volume setting:

Digital devices (CD/USB) produce very little noise

compared with other sources. Lower the volume

before playing these digital sources to avoid

damaging the speakers by the sudden increase of

the output level.

Temperature inside the car:

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

Condensation:

When the car is air-conditioned, moisture may

collect on the laser lens. This may cause disc read

errors. In this case, remove the disc and wait for

the moisture to evaporate.

JVC bears no responsibility for any loss of data in

iPod/iPhone and/or USB mass storage class

device while using this system.

2|　ENGLISH

How to attach/detach the

control panel

How to reset your unit

Your preset adjustments will

also be erased.

How to forcibly eject a disc

(Hold)

0Be careful not to drop the disc when it ejects.

0If this does not work, reset your unit.

Maintenance

Cleaning the unit

Wipe off the dirt on the panel with a dry silicon or

soft cloth. Failure to observe this precaution may

result in damage to the unit.

Cleaning the connector

Wipe off dirt on the connector of the unit and

panel. Use a cotton swab or cloth.

Contents

Preparation ........................................................... 4

Canceling the display demonstration

....... 4

Setting the clock ............................................ 4

Basic operations ................................................. 5

Listening to the radio ....................................... 6

Listening to the Digital Audio Broadcasting

(DAB)

....................................................................... 8

Listening to a disc ............................................ 10

Listening to a USB device ............................. 11

Listening to an iPod/iPhone (KD-DB52 only)

................................................................................. 11

Listening to other external components

................................................................................. 13

Changing the buttons illumination and

display color (KD-DB52 only) ....................... 14

Adjusting the sound ....................................... 15

Using BluetoothTdevices

............................... 16

Menu operations ............................................. 17

Using the remote controller (KD-DB52 only)

................................................................................. 20

Additional information .................................. 20

Troubleshooting .............................................. 22

Specifications .................................................... 24

How to read this manual:

0This manual mainly explains operations

using the buttons on the control panel.

0< > indicates the displays on the control

panel.

ENGLISH　|3

Canceling the display demonstration

The display demonstration is always turned on unless you cancel it.

1Turn on the power.

(Initial setting)

(Hold)

(Initial setting)

4Select <DEMO OFF>.

6Complete the procedure.

Setting the clock

(Initial setting)

(Hold)

2Select <CLOCK>.

3Select <CLOCK SET>.

(Initial setting)

4Adjust the hour.

5Adjust the minute.

6Select <24H/12H>.

7Select <24 HOUR> or <12 HOUR>.

8Complete the procedure.

Preparation

4|　ENGLISH

(KD-DB52 only)

Remote controller

USB input terminal

Front auxiliary

input jack

DO NOT expose to

bright sunlight.

Remote sensor

Detaches the panel

Ejects the disc

Display windowControl dial

Loading slot

Control panel

When you press or hold the following button(s)...

Control panel Remote

controller General function

B/SOURCE -0Turns on.

0Turns off. (Hold)

SOURCE Selects the sources. “CD” or “USB” is selectable only when a disc

is loaded or a USB device is connected.

Control dial

(turn) VOL - / + Adjusts the volume level.

- Selects items.

Control dial

(press)

0Attenuates the sound. If the source is “CD” or “USB/USB-IPOD”

playback pauses.

0Press the button again to cancel attenuating or resume

playback.

- Confirms selection.

DAB -

0Enters DAB mode. (Apage 8)

0Enters DAB SORTING mode. (Hold)

0Displays DAB services.

EQ SOUND

0Selects the preset sound mode.

0Hold the EQ button on the control panel to enter tone level

adjustment directly. (Apage 15)

DISP -0Changes the display information.

0Scrolls the display information. (Hold)

T/P BACK -

0Activates/deactivates TA Standby Reception. (Apage 7)

0Enters PTY Search mode. (Hold) (Apage 7)

0Selects the controlling terminal of an iPod/iPhone. (Hold)

(KD-DB52 only) (Apage 12)

0Returns to the previous menu.

0Exits from the menu. (Hold)

0Selects a preset station or service. (Apage 6, 8)

0Selects MP3/WMA/AAC folder. (Apage 10)

EFHI

0Searches for a station or service. (Apage 6, 8)

0Selects track. (Apage 10, 12)

0Fast-forwards or reverses track. (Hold)

Basic operations

ENGLISH　|5

Searching for a station

ASelect <FM> or <AM>.

BAuto search. (Press)

Manual search. (Hold)

“M” flashes, then press the button repeatedly.

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Storing stations in memory

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6

stations for AM.

While listening to a station...

(Hold)

“PRESET MODE” flashes.

The preset number flashes and “MEMORY”

appears.

2Select preset number.

Auto presetting (FM only)

SSM (Strong-station Sequential

Memory)

You can preset up to 18 stations for FM.

(Hold)

B<TUNER>

B<SSM>

B<SSM 01 – 06>

.“SSM” flashes. When all the stations are stored,

“SSM” stops flashing.

To preset <SSM 07 – 12>/<SSM 13 – 18>,

repeat steps 1 and 2.

Selecting a preset station

Improving the FM reception

(Hold)

B<TUNER>

B<MONO>

B<MONO ON>

0Reception improves, but stereo effect will be

lost.

To restore the stereo effect, repeat the same

procedure to select <MONO OFF>.

Changing the display information

(for non-Radio Data System station)

Frequency 1Clock

(for FM Radio Data System station)

Station name (PS) BFrequency BProgramme

type (PTY) BClock B(back to the beginning)

Listening to the radio

6|　ENGLISH

The following features are available only

for FM Radio Data System stations.

Searching for your favorite

Programmes—Programme

Type (PTY) Search

(Hold)

PTY Search starts.

If there is a station broadcasting a programme of the

same PTY code as you have selected, that station is

tuned in.

2Select a PTY code.

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M

(music), LIGHT M (music), CLASSICS, OTHER M (music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE

IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),

OLDIES, FOLK M (music), DOCUMENT

Activating TA/News Standby

Reception

Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) or

NEWS programme from any source other than

AM.

TA Standby Reception

TP indicator TA Standby Reception

Lights up

The unit will temporarily switch

to Traffic Announcement (TA) if

available.

Flashes

Not yet activated. Tune in to

another station providing the

Radio Data System signals.

0To deactivate, press T/P BACK again.

NEWS Standby Reception

(Hold)

B<TUNER>

B<NEWS-STBY>

B<NEWS ON>

.The unit will temporarily switch to News

Programme if available.

0The volume adjustment for Traffic

Announcement or News is automatically

memorized. It will be applied the next time the

unit switches to Traffic Announcement or

News.

Tracking the same programme

—Network-Tracking Reception

When driving in an area where FM reception is

not sufficient enough, this unit automatically

tunes in to another FM Radio Data System station

of the same network, possibly broadcasting the

same programme with stronger signals.

(Hold)

B<TUNER>

B<AF-REG>

AF ON

Switches to another station. The

programme may differ from the

one currently received (the AF

indicator lights up).

AF-REG ON

Switches to another station

broadcasting the same

programme (the AF and REG

indicators light up).

Automatic station selection—

Programme Search

When the signal of a preset station you have

selected is weak, this unit searches for another

station possibly broadcasting the same

programme as the original preset station is

broadcasting.

<P-SEARCH> (Apage 19)

Listening to the radio

ENGLISH　|7

Listening to the Digital Audio Broadcasting (DAB)

A A

Searching for a service

ASelect <DAB>.

* Usable only when switching from other

sources.

BStart searching for an ensemble.

0Auto search. (Press)

When an ensemble is received, searching stops.

To stop searching, press the same button again.

0Manual search. (Hold)

“M” flashes, then press the button repeatedly.

CSelect a service (either primary or secondary)

to listen to.

Searching for a service in

alphabetical order—Alphabet

“DAB SORTING” flashes.

.“DAB SORTING” disappears when sorting is

complete.

1Start DAB services sorting.

(Hold)

The services appear in alphabetical order.

0“LIST EMPTY” appears if there is no service.

2Display the services.

0Skip this step if not many services are available.

3Select the desired character.

- A to Z Search

4Select the desired service.

Storing DAB services in

memory

You can preset up to 18 DAB services.

While listening to a service...

(Hold)

“PRESET MODE” flashes.

The preset number flashes and “MEMORY”

appears.

2Select preset number.

Selecting a preset DAB service

8|　ENGLISH

Tracking the same programme

—DAB Alternative Frequency

(AF) Reception

(Hold)

B<TUNER>

B<DAB AF>

DAB AF ON

Traces the programme among

DAB services and FM Radio Data

System stations.

DAB AF OFF Cancels.

0Alternative Frequency Reception is activated in

the default factory setting.

Searching for your favorite

Programmes—Programme

Type (PTY) Search

(Apage 7)

Activating Standby Reception

Programme Type Standby (PTY-

STBY) Reception

(Hold)

B<TUNER>

B<PTY-STBY>

3Select your favorite PTY code.

PTY indicator PTY Standby Reception

Flashes Not yet activated.

Lights up The unit is on standby for the

target PTY. When the

programme starts, “Service

name” and “PTY code” flashes

alternately.

0To deactivate, select <OFF> in step 2.

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

any source.

(Apage 7)

Changing the display information

Service name BEnsemble name BChannel

number BFrequency BProgramme type (PTY)

BDynamic Label Segment (DLS) BDigital Radio

Type/Audio Bit Rate BClock B(back to the

beginning)

0“NO SIGNAL” appears if there is no signal.

Displaying the radio text

information

When “D” indicator lights on the display, you can

check the Dynamic Label Segment (DLS) directly.

(Hold)

Listening to the Digital Audio Broadcasting (DAB)

ENGLISH　|9

Label side

Playing a disc

The source changes to “CD” and playback starts.

All tracks will be played repeatedly until you

change the source or eject the disc.

To eject a disc

0If the ejected disc is not removed within 15

seconds, it will automatically reload into the

loading slot.

0If the disc cannot be ejected, Apage 3.

Selecting a folder/track

Selects folder.

(For MP3/WMA/AAC)

0Selects track. (Press)

0Fast-forwards or reverses

the track. (Hold)

Selecting a track/folder from

the list

The current folder name/track no. appears.

(For MP3/WMA/AAC)

The current track title appears.

2Select a folder.

0For MP3/WMA/AAC

If the disc contains many folders or tracks, you

can fast search for desired folder or track by

turning the control dial quickly.

3Select a track.

Selecting the playback modes

You can select one of the following playback

modes at a time.

(Hold)

h<REPEAT>1<RANDOM>

REPEAT B

TRACK RPT Repeats current track.

FOLDER RPT * Repeats current folder.

RPT OFF Cancels repeat playback.

RANDOM A

FOLDER RND *

Randomly plays all tracks of

current folder, then tracks of

next folders.

ALL RND Randomly plays all tracks.

RND OFF Cancels random playback.

* For MP3/WMA/AAC

Changing the display information

Track no./Playing time BTrack no./Clock time B

Album title/Artist* BTrack title* B(back to the

beginning)

* “NO NAME” appears for conventional CDs or if

not recorded.

Listening to a disc

10 |　ENGLISH

Andere Handbücher für KD-DB52

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung