JVC KD-G425 Bedienungsanleitung

ENGLISH

For canceling the display demonstration, see page 6.

For installation and connections, refer to the separate manual.

INSTRUCTIONS

GET0350-001A

[U/UH]

KD-G425

CD RECEIVER KD-G425

Cover_KD-G425[U_UH]f.indd 2Cover_KD-G425[U_UH]f.indd 2 11/9/05 2:53:52 PM11/9/05 2:53:52 PM

ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLA 1 LA ER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUT IDE THE UNIT.

How to forcibly eject a di c

• If this does not work, reset your unit.

• Be careful not to drop the disc when it ejects.

How to detach/attach the control

panel

Detaching...

Attaching...

Warning:

If you need to operate the unit while driving,

be sure to look ahead carefully or you may be

involved in a traffic accident.

Caution on volume etting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

How to re et your unit

• Your preset adjustments will also be erased.

• If a disc is loaded, it will eject. Be careful not to

drop the disc.

EN02-05_KD-G425[U_UH]f.indd 2EN02-05_KD-G425[U_UH]f.indd 2 11/9/05 2:53:02 PM11/9/05 2:53:02 PM

ENGLISH

How to read thi manual

• Button operations are mainly explained with

the illustrations in the table below.

• ome related tips and notes are explained in

“More about this unit” (see pages 17 – 19).

Press briefly.

Press repeatedly.

Press either

one.

Press and hold until your

desired response begins.

Press and hold both

buttons at the same time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

: Indicator displayed for the

corresponding operation.

How to u e the MODE button

If you press MODE, the unit goes into functions

mode, then the number buttons and 5/∞

buttons work as different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

To use these buttons for their original

functions again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared or press

MODE again.

CONTENTS

Control panel ................................... 4

Remote controller — RM-RK50 .............. 5

Getting tarted ................................. 6

Basic operations .................................................... 6

Radio operation .............................. 7

Di c operation ................................. 8

Playing a disc in the unit ...................................... 8

Playing discs in the CD changer ............................ 8

Sound adju tment ........................... 11

General etting — PSM ................... 12

iPod®/D. player operation ................ 14

Other external component operation

... 16

Maintenance .................................... 16

More about thi unit ......................... 17

Trouble hooting ............................... 19

Specification ................................... 21

For afety...

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• top the car before performing any

complicated operations.

Temperature in ide the car...

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in

the car becomes normal before operating the

unit.

Time countdown indicator

EN02-05_KD-G425[U_UH]f.indd 3EN02-05_KD-G425[U_UH]f.indd 3 11/9/05 2:53:05 PM11/9/05 2:53:05 PM

ENGLISH

1 4 /¢ buttons

2 (standby/on attenuator) button

3 5 (up) / ∞ (down) buttons

4 Loading slot

5 Display window

6 0 (eject) button

7 EQ (equalizer) button

8 Remote sensor

DO NOT e pose the remote sensor to strong

light (direct sunlight or artificial lighting).

9 RC (source) button

p BAND button

q Control dial

w EL (select) button

e MO (monaural) button

r M ( trong-station equential Memory)

button

t Number buttons

y RPT (repeat) button

u RND (random) button

i MODE button

o DI P (display) button

; (control panel release) button

Di play window

a Disc information indicators—TAG (ID3

Tag), (folder), (track/file)

s Disc type indicators—WMA, MP3

d Playback source indicators—

CH: Lights up only when CD-CH is

selected as the playback source.

DI C: Lights up for the built-in CD player.

f Playback mode / item indicators—

RND (random), (disc), (folder),

RPT (repeat)

g LOUD (loudness) indicator

h EQ (equalizer) indicator

j ound mode (C-EQ: custom equalizer)

indicators—JAZZ, CLA IC, HIP HOP,

POP , ROCK, U ER

k Tr (track) indicator

l ource display / Volume level indicator

/ Main display

z Tuner reception indicators— T (stereo),

MO (monaural)

Part identification

Di play window

Control panel

EN02-05_KD-G425[U_UH]f.indd 4EN02-05_KD-G425[U_UH]f.indd 4 11/9/05 2:53:06 PM11/9/05 2:53:06 PM

ENGLISH

Remote controller — RM-RK50

Installing the lithium coin battery

(CR2025)

Aim the remote controller directly at the

remote sensor on the unit. Make sure there is

no obstacle in between.

Warning:

• Do not install any battery other than

CR2025 or its equivalent; otherwise, it may

explode.

• tore the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble,

heat the battery, or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

Caution:

Main elements and features

1 (standby/on/attenuator) button

• Turns the power on if pressed briefly or

attenuates the sound when the power is

on.

• Turns the power off if pressed and held.

2 5 U (up) / D (down) ∞ buttons

• Changes the FM/AM bands with 5 U.

• Changes the preset stations with D ∞.

• Changes the folder of the MP3/WMA

discs.

• While playing an MP3 disc on an

MP3-compatible CD changer:

– Changes the disc if pressed briefly.

– Changes the folder if pressed and held.

• While listening to an Apple iPod® or a

JVC D. player:

– Pauses/stops or resumes playback with

D ∞.

– Enters the main menu with 5 U.

(Now 5 U/D ∞/2 R/F 3 work as the

menu selecting buttons.)*

3 VOL – / VOL + buttons

• Adjusts the volume level.

4 OUND button

• elects the sound mode (C-EQ: custom

equalizer).

5 OURCE button

• elects the source.

* 5 U : Returns to the previous menu.

D ∞ : Confirms the selection.

To be continued...

EN02-05_KD-G425[U_UH]f.indd 5EN02-05_KD-G425[U_UH]f.indd 5 11/15/05 4:37:32 PM11/15/05 4:37:32 PM

ENGLISH

@ Adjust the sound as you want. (See

pages 11 and 12.)

To drop the volume in a

moment (ATT)

To restore the sound, press

it again.

To turn off the power

Basic settings

• See also “General settings — PSM” on pages

12 and 13.

1 Canceling the display

demonstrations

Select “D MO,” then “D MO OFF.”

2 Setting the clock

Select “CLOCK H” (hour), then adjust

the hour.

Select “CLOCK M” (minute), then

adjust the minute.

3 Finish the procedure.

To check the current clock

time when the power is

turned off

Volume level indicator

Volume level appears.

6 2 R (reverse) / F (forward) 3 buttons

• Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if

pressed and held.

• Changes the tracks if pressed briefly.

• While listening to an iPod or a D. player

(in menu selecting mode):

– Selects an item if pressed briefly. (Then,

press D ∞ to confirm the selection.)

– Skips 10 items at a time if pressed and

held.

Getting started

Basic operations

~ Turn on the power.

* You cannot select these sources if they

are not ready or not connected.

! For F /A tuner

⁄ Adjust the volume.

EN06-11_KD-G425[U_UH]f.indd 6EN06-11_KD-G425[U_UH]f.indd 6 11/9/05 2:52:41 PM11/9/05 2:52:41 PM

ENGLISH

Radio operations

! Start searching for a station.

When a station is received, searching

stops.

To stop searching, press the same button

again.

To tune in to a station manually

In step ! above...

2 Select a desired station frequency.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Selected band appears.

When an FM stereo broadcast is hard to

receive

Reception improves, but stereo effect will be

lost.

To restore the stereo effect, repeat the same

procedure. “MONO OFF” appears and the MO

indicator goes off.

toring stations in memory

You can preset six stations for each band.

FM station automatic presetting —

M ( trong-station equential

Memory)

1 Select the F band (F 1 – F 3) you

want to store into.

“SSM” flashes, then disappears when

automatic presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Lights up when monaural mode is activated.

EN06-11_KD-G425[U_UH]f.indd 7EN06-11_KD-G425[U_UH]f.indd 7 11/9/05 2:52:44 PM11/9/05 2:52:44 PM

ENGLISH

Manual presetting

x.: Storing FM station of 92.5 MHz into preset

number 4 of the FM1 band.

Listening to a preset station

2 Select the preset station (1 – 6) you

want.

To check the other information while

listening to an FM or AM station

Disc operations

Playing a disc in the unit

All tracks will be played repeatedly until you

change the source or eject the disc.

To stop play and eject the

disc

Playing discs in the CD changer

All discs in the magazine will be played

repeatedly until you change the source.

• jecting the magazine will also stop playing.

* If you have changed the external input

setting to “EXT IN” (see page 1 ), you

cannot select the CD changer.

Ÿ Select a disc.

For disc number from 01 – 06:

For disc number from 07 – 12:

Clock Ô Frequency

Preset number flashes for a while.

EN06-11_KD-G425[U_UH]f.indd 8EN06-11_KD-G425[U_UH]f.indd 8 11/9/05 2:52:45 PM11/9/05 2:52:45 PM

ENGLISH

To go to the next or previous folders (only for

MP3 or WMA discs)

For MP3 discs:

For WMA discs:

To locate a particular track (for CD) or folder

(for MP3 or WMA discs) directly

To select a number from 01 – 06:

To select a number from 07 – 12:

• To use direct folder access on MP3/WMA

discs, it is required that folders are assigned

with 2-digit numbers at the beginning of their

folder names—01, 02, 03, and so on.

To select a particular track in a folder (for

MP3 or WMA discs):

About MP3 and WMA discs

MP3 and WMA “tracks” (words “file” and

“track” are used interchangeably) are recorded

in “folders.”

About the CD changer

It is recommended to use a JVC

MP3-compatible CD changer with your unit.

• You can also connect other CH-X series CD

changers (except CH-X99 and CH-X100).

These units are not compatible with MP3

discs.

• You cannot play any WMA disc in the CD

changer.

• You cannot use the KD-MK series CD

changers with this unit.

• Disc text information recorded in the CD

Text can be displayed when a JVC CD Text

compatible CD changer is connected.

• For connection, see Installation/Connection

Manual (separate volume).

To fast-forward or reverse the track

To go to the next or previous tracks

EN06-11_KD-G425[U_UH]f.indd 9EN06-11_KD-G425[U_UH]f.indd 9 11/9/05 2:52:46 PM11/9/05 2:52:46 PM

ENGLISH

Other main functions

Skipping tracks quickly during play

Only possible on JVC

MP3-compatible C changer

• For MP3 or WMA discs, you can skip tracks

within the same folder.

Ex. To select track 32 while playing tracks

whose number is a single digit (1 to 9)

Each time you press the button, you can

skip 10 tracks.

• After the last track, the first track will be

selected and vice versa.

Prohibiting disc ejection

You can lock a disc in the loading slot.

To cancel the prohibition, repeat the same

procedure.

Changing the display information

While playing an audio C or a C Text

While playing an MP3 or a WMA*2 disc

• When “TAG DISP” is set to “TAG ON”

(see page 1 )

• When “TAG DISP” is set to “TAG OFF”

: Clock with the current track number

: Elapsed playing time with the current

track number

*1 If the current disc is an audio CD,

“NO NAME” appears.

*2 Only for the built-in CD player.

*3 If an M 3/WMA file does not have Tag

information, folder name and file name

appear. In this case, the TAG indicator will

not light up.

EN06-11_KD-G425[U_UH]f.indd 10EN06-11_KD-G425[U_UH]f.indd 10 11/15/05 4:39:03 PM11/15/05 4:39:03 PM

Andere Handbücher für KD-G425

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung