JVC KD-R326 Bedienungsanleitung

ENGLISH

GET0675-001A

[U/UH]

KD-R326/KD-R325

CD RECEIVER /

For canceling the display demonstration, see page 4. /

INSTRUCTIONS

For installation and connections, refer to the separate manual.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

CoverRear_KD-R326_R325[U]_1.indd 1-2CoverRear_KD-R326_R325[U]_1.indd 1-2 7/9/10 11:12:43 AM7/9/10 11:12:43 AM

2ENGLISH

[European Union only]

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume before

playing a disc to avoid damaging the speakers

by the sudden increase of the output level.

Caution for DualDisc playback:

The Non-DVD side of a “DualDisc” does not

comply with the “Compact Disc Digital Audio”

standard. Therefore, the use of Non-DVD side

of a DualDisc on this product may not be

recommended.

WARNING:

Stop the car before operating the unit.

Caution:

Adjust the volume so that you can hear sounds

outside the car. Driving with the volume too

high may cause an accident.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with

optical instruments.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

EN02-15_KD-R326_R325[U]_4.indd 2EN02-15_KD-R326_R325[U]_4.indd 2 8/3/10 4:03:32 PM8/3/10 4:03:32 PM

3ENGLISH

How to attach/detach the control

panel

How to reset your unit

Your preset adjustments will

also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

Maintenance

Cleaning the unit

Wipe off the dirt on the panel with a dry silicon

or soft cloth. Failure to observe this precaution

may result in damage to the monitor or unit.

Cleaning the connector

Wipe off dirt on the connector of the unit and

panel. Use a cotton swab or cloth.

CONTENTS

3 How to attach/detach the control

panel

3 How to reset your unit

3 How to forcibly eject a disc

3 Maintenance

4 Canceling the display

demonstration

4 Setting the clock

5 Preparing the remote controller

5 About discs

6 Basic operations

7 Listening to the radio

8 Listening to a disc

9 Connecting the other external

components

9 Listening to the other external

components

10 Selecting a preset sound mode

10 Menu operations

13 Troubleshooting

14 Using Bluetooth® devices

15 Specifications

Condensation : When the car is air-

conditioned, moisture may collect on the

laser lens. This may cause disc read errors. In

this case, remove the disc and wait for the

moisture to evaporate.

Temperature inside the car : If you have

parked the car for a long time in hot or cold

weather, wait until the temperature in the car

becomes normal before operating the unit.

[Hold]

EN02-15_KD-R326_R325[U]_f.indd 3EN02-15_KD-R326_R325[U]_f.indd 3 8/25/10 11:39:41 AM8/25/10 11:39:41 AM

4ENGLISH

1 Turn on the power.

Setting the clock

1 Turn on the power.

3 Select <CLOCK>.

4 Select <CLOCK SET>.

5 Adjust the hour.

6 Adjust the minute.

7 Finish the procedure.

4 Select <DEMO OFF>.

6 Finish the procedure.

Canceling the display demonstration

(Initial setting)

[Hold]

(Initial setting)

[Hold]

Display demonstration will be activated automatically if no operation is done for about 20 seconds.

EN02-15_KD-R326_R325[U]_4.indd 4EN02-15_KD-R326_R325[U]_4.indd 4 8/3/10 4:03:33 PM8/3/10 4:03:33 PM

5ENGLISH

Caution:

• Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

• Battery shall not be exposed to excessive heat

such as sunshine, fire, or the like.

Warning (to prevent accidents and

damage):

• Do not install any battery other than CR2025

or its equivalent.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct

sunlight for a long time.

• Store the battery in a place where children

cannot reach.

• Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

• Do not leave the battery with other metallic

materials.

• Do not poke the battery with tweezers or

similar tools.

• Wrap the battery with tape and insulate when

throwing away or saving it.

Preparing the remote controller

When you use the remote controller for the first

time, pull out the insulation sheet.

If the effectiveness of the remote controller

decreases, replace the battery.

Replacing the lithium coin battery

CR2025

Insulation sheet

About discs

This unit can only play the CDs with:

Discs that cannot be used:

• Discs that are not round.

• Discs with coloring on the recording surface

or discs that are dirty.

• You cannot play a Recordable/ReWritable

disc that has not been finalized. (For the

finalization process refer to your disc writing

software, and your disc recorder instruction

manual.)

• 3-inch CD cannot be used. Attempt to insert

using an adapter can cause malfunction.

Handling discs:

• Do not touch the recording surface of the

disc.

• Do not stick tape etc. on the disc, or use a disc

with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move

outward.

• Clean the disc with a dry silicon or soft cloth.

Do not use any solvents.

• When removing discs from this unit, pull them

out horizontally.

• Remove the rims from the center hole and

disc edge before inserting a disc.

EN02-15_KD-R326_R325[U]_4.indd 5EN02-15_KD-R326_R325[U]_4.indd 5 8/3/10 4:03:33 PM8/3/10 4:03:33 PM

6ENGLISH

Basic operations

Control dial Ejects the discLoading slot

Remote sensor

• DO NOT expose to

bright sunlight.

Display window

Front auxiliary input jack

Detaches the panel

When you press or hold the following button(s)...

Main unit

Remote

controller

General operation

/ SOURCE

—• Turns on.

• Turns off [Hold].

SOURCE

Selects the sources (FM, CD, F-AUX, BT AUDIO or R-AUX or

BT PHONE, AM).

• “CD” is selectable only when a disc is loaded.

Control dial

(turn)

VOL – / + • Adjusts the volume level.

—• Selects items.

Control dial

(press)

Mutes the sound during playback. If the source is “CD,” playback

pauses.

• Press the button again to cancel muting or resume playback.

— Confirms selection.

EQ SOUND

Selects the sound mode.

• Hold the EQ button on the main unit to enter tone level

adjustment directly. (page 10)

Number

buttons (1 – 6) —

• Selects preset stations.

• Stores the current station into the selected number button [Hold].

• Press number button 1 (RPT) or 2 (RND) to enter REPEAT/

RANDOM setting directly. (page 8)

BRIGHTNESS — Enters <BRIGHTNESS> menu directly. (page 11)

BACK —• Returns to the previous menu.

• Exit from the menu [Hold].

DISP —• Changes the display information.

• Scrolls the display information [Hold].

EN02-15_KD-R326_R325[U]_4.indd 6EN02-15_KD-R326_R325[U]_4.indd 6 8/3/10 4:03:34 PM8/3/10 4:03:34 PM

7ENGLISH

Improving the FM reception

]

<TUNER>

]

<MONO>

]

Reception improves, but stereo effect

will be lost.

To restore the stereo effect, repeat the same

procedure to select <MONO OFF>.

Automatic presetting (FM)—

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

]

<TUNER>

]

<SSM>

]

“SSM” flashes and local stations with the

strongest signal are searched and stored

automatically.

To preset another 6 stations, repeat the

above procedure by selecting one of the other

6 SSM setting ranges.

Changing the display information

Frequency

Clock

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6

stations for AM.

]

Tune in to a station you want to

preset.

2[Hold]

“PRESET MODE” flashes.

]

Selects preset number.

Preset number flashes and “MEMORY”

appears.

• Pressing and holding the number buttons

(1 – 6) can also store the current station to the

selected number buttons (1 – 6).

Selecting a preset station

• Pressing the number buttons (1 – 6) can also

select the preset stations (1 – 6).

Using the remote controller

∞

: Changes the preset stations.

: Searches for stations.

Listening to the radio

[Hold]

]

“FM” or “AM”

Ÿ• Auto search [Press].

• Manual search [Hold].

“M” flashes, then press the button

repeatedly.

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

EN02-15_KD-R326_R325[U]_4.indd 7EN02-15_KD-R326_R325[U]_4.indd 7 8/3/10 4:03:34 PM8/3/10 4:03:34 PM

8ENGLISH

Stopping playback and ejecting

the disc

If the ejected disc is not

removed within 15 seconds, it is

automatically inserted into the

loading slot.

Selecting a track/folder

Selects folder of the MP3/WMA

[Press]Selects track.

[Hold] Fast-forwards or

reverses the track.

Using the remote controller

∞

: Selects folder of the MP3/WMA.

: [Press] Selects track.

[Hold] Fast-forwards or reverses the

track.

Changing the display information

Disc title/Album name/performer (folder

name)*

Track title (file name)*

Current

track number with the elapsed playing time

Current track number with the clock time

(back to the beginning)

* “NO NAME” appears for conventional CDs or if

not recorded.

Selecting a track/folder from the

list

• If the MP3/WMA disc contains many tracks,

you can fast search (±10, ±100) through the

disc by turning the control dial quickly.

•

To return to the previous menu, press BACK.

Selecting the playback modes

You can use only one of the following playback

modes at a time.

• Pressing number button 1 (RPT) or

2 (RND) can enter REPEAT/RANDOM

setting directly. Then, perform step 3.

]

“REPEAT”

“RANDOM”

REPEAT

TRACK RPT : Repeats current track

FOLDER RPT : Repeats current folder

RANDOM

FOLDER RND : Randomly plays all tracks

of current folder, then

tracks of next folders

ALL RND : Randomly plays all tracks

To cancel repeat play or random play, select

“RPT OFF” or “RND OFF.”

Listening to a disc

[Hold]

]

“CD”

ŸPlayback starts

automatically.

All tracks will be played repeatedly until you change the source

or eject the disc.

EN02-15_KD-R326_R325[U]_7.indd 8EN02-15_KD-R326_R325[U]_7.indd 8 8/20/10 4:47:25 PM8/20/10 4:47:25 PM

9ENGLISH

Connecting the other external components

Listening to the other external components

3.5 mm stereo mini plug

(with “L” shaped connector)

(not supplied)

You can connect an external component to the auxiliary input jack on the control panel (F-AUX)

and/or on the rear side of the unit (R-AUX).

Summary of using the external components through the auxiliary input jacks:

External component Auxiliary

input jack

Preparation Source

name

Connecting

cable/device

(not supplied)

Menu setting

item

Sub-

item Setting

Portable audio

player

Front SRC SELECT F-AUX ON F-AUX See below.

Rear SRC SELECT R-AUX ON R-AUX

Bluetooth device Rear SRC SELECT R-AUX BT ADAPTER BT AUDIO/

BT PHONE*

KS-BTA100

(page 14)

* ”BT PHONE” appears when a Bluetooth phone is in use.

For details, refer also to the instructions supplied with the external components.

]

“F-AUX” or “R-AUX”

ŸTurn on the connected component and

start playing the source.

On the control panel (F-AUX): On the rear panel (R-AUX):

Portable audio player,

etc.

Portable audio player,

etc.

3.5 mm stereo mini

plug (not supplied)

Recommended to use a 3-terminal plug head stereo mini plug for

optimum audio output.

EN02-15_KD-R326_5_001A_f.indd 9EN02-15_KD-R326_5_001A_f.indd 9 8/30/10 2:01:38 PM8/30/10 2:01:38 PM

10 ENGLISH

You can select a preset sound mode suitable

for the music genre.

FLAT

NATURAL

DYNAMIC

VOCAL BOOST

BASS BOOST

USER

(back

to the beginning)

While listening, you can adjust the tone level of

the selected sound mode.

Adjust the level (–06 to +06) of the

selected tone (BASS/ MID/ TRE).

The sound mode is automatically stored

and changed to “USER.”

Storing your own sound mode

You can store your own adjustments in

memory.

Menu operations

If no operation is done

for about 60 seconds, the

operation will be canceled.

2 3 Repeat step 2if necessary.

• To return to the previous

menu, press BACK.

• To exit from the menu, press

DISP or MENU.

Menu item Selectable setting, [Initial: Underlined]

DEMO

For settings, see page 4.

CLOCK

[Hold]

Selecting a preset sound mode

]

]

<BASS/ MIDDLE/

TREBLE>

Adjust the sound elements of the

selected tone.

BASS [Initial: 80 Hz, 00, Q1.0]

Frequency: 60/ 80/ 100/ 200 Hz

Level: –06 to +06

Q: Q1.0/ 1.25/ 1.5/ 2.0

MIDDLE [Initial: 1.0 kHz, 00, Q1.25]

Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz

Level: –06 to +06

Q: Q0.75/ 1.0/ 1.25

TREBLE [Initial: 10.0 kHz, 00, Q FIX]

Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz

Level: –06 to +06

Q: Q FIX

4Repeat steps 2and 3to adjust other

tones.

The adjustments made is automatically

stored and changed to “USER.”

EN02-15_KD-R326_R325[U]_4.indd 10EN02-15_KD-R326_R325[U]_4.indd 10 8/18/10 3:54:27 PM8/18/10 3:54:27 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung