JVC KD-R412 Bedienungsanleitung

FRANÇAIS

ENGLISH

GET0624-003A

[E/EU]

EN, FR

For canceling the display demonstration, see page 4. / Pour annuler la démonstration des

affichages, référez-vous à la page 4.

CD RECEIVER / RÉCEPTEUR CD

KD-R412 / KD-R411 /

KD-R35 / KD-R312 / KD-R311

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

For installation and connections, refer to the separate manual. / Pour l’installation et les

raccordements, se référer au manuel séparé.

Dear Customer,

This apparatus is in conformance with the valid

European directives and standards regarding

electromagnetic compatibility and electrical safety.

European representative of Victor Company of

Japan, Limited is:

JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg

Germany

Cher(e) client(e),

Cet appareil est conforme aux directives et

normes européennes en vigueur concernant la

compatibilité électromagnétique et à la sécurité

électrique.

Représentant européen de la société Victor

Company of Japan, Limited:

JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg

Allemagne

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

CoverRear_KD-R412_003A_f.indd 1-2CoverRear_KD-R412_003A_f.indd 1-2 10/13/09 11:51:18 AM10/13/09 11:51:18 AM

2ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with

optical instruments.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the unit while driving,

be sure to look around carefully or you may be

involved in a traffic accident.

For safety...

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Temperature inside the car...

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating

the unit.

KD-R412/KD-R411 is equipped with the

steering wheel remote control function.

Before operating, connect a JVC's OE remote

adapter (not supplied) which matches your car

to the steering wheel remote input terminal on

the rear of the unit.

• For details, refer also to the instructions

supplied with the remote adapter.

Information for Users on Disposal of

Old Equipment and Batteries

[European Union only]

These symbols indicate that the product and

the battery with this symbol should not be

disposed as general household waste at its

end-of-life.

If you wish to dispose of this product and

the battery, please do so in accordance with

applicable national legislation or other rules

in your country and municipality.

By disposing of this product correctly, you

will help to conserve natural resources and

will help prevent potential negative effects

on the environment and human health.

Notice:

The sign Pb below the symbol for batteries

indicates that this battery contains lead.

Products

Battery

EN02-09_KD-R412_003A_f.indd 2EN02-09_KD-R412_003A_f.indd 2 10/15/09 2:32:58 PM10/15/09 2:32:58 PM

3ENGLISH

How to read this manual

The following icons/symbols are used to

indicate:

Press and hold the button(s)

until the desired operation

begins.

Turn the control dial.

Turn the control dial

to make a selection,

then press to confirm.

( XX) Reference page number

<XXXX> Menu setting item

Continued on the next page

How to attach/detach the control

panel

How to reset your unit

Your preset adjustments

will also be erased.

How to forcibly eject a disc

• You can forcibly eject the loaded disc even

if the disc is locked. To lock/unlock the disc,

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

CONTENTS

3 How to read this manual

3 How to attach/detach the control

panel

3 How to reset your unit

3 How to forcibly eject a disc

4 Canceling the display

demonstration

4 Setting the clock

5 Basic operations

6 Listening to the radio

8 Listening to a disc

10 Listening to the USB device

(For KD-R412/KD-R411/KD-R35)

11 Listening to the other external

components

12 Using the remote controller

(For KD-R412/KD-R411)

13 Selecting a preset sound mode

13 Menu operations

17 More about this unit

20 Maintenance

21 Troubleshooting

24 Specifications

[Hold]

EN02-09_KD-R412_003A_4.indd 3EN02-09_KD-R412_003A_4.indd 3 10/12/09 9:59:13 AM10/12/09 9:59:13 AM

4ENGLISH

1 Turn on the power.

Setting the clock

4 Select <DEMO OFF>.

6 Finish the procedure.

Canceling the display demonstration

6 Adjust the minute.

7 Select <24H/12H>.

8 Select <24 HOUR> or

<12 HOUR>.

9 Finish the procedure.

1 Turn on the power.

3 Select <CLOCK>.

4 Select <CLOCK SET>.

5 Adjust the hour.

(Initial setting)

[Hold]

(Initial setting)

[Hold]

EN02-09_KD-R412_003A_4.indd 4EN02-09_KD-R412_003A_4.indd 4 10/12/09 9:59:13 AM10/12/09 9:59:13 AM

5ENGLISH

Basic operations

Control dialEjects the disc Loading slot

Remote sensor (for KD-R412/KD-R411)

You can control this unit with an

optionally purchased remote control,

RM-RK50 ( 12).

Display window

Auxiliary input jack

Detaches the panel

When you press or hold the following button(s)...

Button General operation

• Turns on.

• Selects the available sources (if the power is turned on). If the source is ready,

playback also starts.

• Turns off if pressed and held.

• Adjusts the volume level.

• Selects items.

• Mutes the sound while listening to a source. If the source is “CD“ or “USB,“

playback pauses. Press the control dial again to cancel muting or resume

playback.

• Confirms selection.

• Selects the sound mode.

• Enters tone level adjustment directly ( 13) if pressed and held.

Enters playback mode menu directly ( 9).

• Returns to the previous menu

• Activates/deactivates TA Standby Reception

• Enters PTY Searching mode if pressed and held

Power off : Checks the current clock time

Power on : Changes the display information

USB (Universal Serial

Bus) input jack

For KD-R412/

KD-R411/KD-R35

EN02-09_KD-R412_003A_5.indd 5EN02-09_KD-R412_003A_5.indd 5 10/13/09 12:49:11 PM10/13/09 12:49:11 PM

6ENGLISH

Manual search

[Hold]

“M” flashes, then press

the button repeatedly.

When an FM stereo broadcast is

hard to receive

]

<TUNER>

]

<MONO>

]

Reception improves, but stereo effect

will be lost.

To restore the stereo effect, repeat the same

procedure to select <MONO OFF>.

Changing the display information

Frequency

Clock

(back to

the beginning)

Automatic presetting (FM)—

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

]

<TUNER>

]

<SSM>

]

<SSM 01 – 06> / <SSM 07 – 12> /

“SSM” flashes and local stations with

the strongest signals are searched and

stored automatically.

To preset another 6 stations, repeat the

above procedure by selecting one of the other

6 SSM setting ranges.

Listening to the radio

]

“FM” or “AM”

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

[Hold]

EN02-09_KD-R412_003A_5.indd 6EN02-09_KD-R412_003A_5.indd 6 10/13/09 12:49:39 PM10/13/09 12:49:39 PM

7ENGLISH

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6

stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset

number “04.”

]

“92.50MHz”

“PRESET MODE” flashes.

]

Selects preset number “04.”

“P04” flashes and “MEMORY” appears.

Selecting a preset station

The following features are available

only for FM Radio Data System stations.

Searching for your favourite

FM Radio Data System

programme—PTY Search

You can tune in to a station broadcasting your

favourite programme by searching for a PTY

code.

The last selected PTY code appears.

]

Select one of your favourite

programme types or a PTY code ( 17),

and start searching.

If there is a station broadcasting a

programme of the same PTY code as you

have selected, that station is tuned in.

Standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

any source other than AM.

• The volume changes to the preset TA volume

level if the current level is lower than the

preset level ( 15).

To activate TA Standby Reception

If the TP indicator lights up, TA

Standby Reception is activated.

If the TP indicator flashes, TA

Standby Reception is not yet

activated.

• To activate the reception, tune in to another

station providing Radio Data System signals

required for TA Standby Reception.

• To deactivate the reception, press

T/P BACK

again.

[Hold] [Hold]

EN02-09_KD-R412_003A_5.indd 7EN02-09_KD-R412_003A_5.indd 7 10/12/09 10:31:57 AM10/12/09 10:31:57 AM

8ENGLISH

Stopping playback and ejecting

the disc

“NO DISC” appears.

Press /

SOURCE

to listen to

another playback source.

Listening to a disc

]

Turn on the power.

ŸAll tracks will be played repeatedly until you

change the source or eject the disc.

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

PTY Standby Reception

PTY Standby Reception allows the unit to

switch temporarily to your favourite PTY

programme from any source other than AM.

To activate and select your favourite PTY

code for PTY Standby Reception, see “Menu

operations: <PTY-STANDBY>.” ( 14)

If the PTY indicator lights up, PTY Standby

Reception is activated.

If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

• To activate the reception, tune in to another

station providing these signals.

• To deactivate the reception, select <PTY OFF>

for the PTY code ( 14). The PTY indicator

goes off.

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is

not sufficient enough, this unit automatically

tunes in to another FM Radio Data System

station of the same network, possibly

broadcasting the same programme with

stronger signals.

Programme A broadcasting on different

frequency areas (01 – 05)

To change the Network-Tracking Reception

setting, see “Menu operations: <AF-REG>.”

( 14)

Automatic station selection—

Programme Search

Usually when you select a preset number, the

station preset in that number is tuned in.

If the signals from the FM Radio Data System

preset station are not sufficient for good

reception, this unit, using the AF data, tunes in

to another frequency possibly broadcasting the

same programme as the original preset station

is broadcasting.

• See “Menu operations: <P-SEARCH>.” ( 15)

Changing the display information

Station name (PS)

Station

Frequency

Programme

type (PTY)

Clock

(back to

the beginning)

[Hold]

EN02-09_KD-R412_003A_4.indd 8EN02-09_KD-R412_003A_4.indd 8 10/12/09 9:59:15 AM10/12/09 9:59:15 AM

9ENGLISH

Selects folder of the MP3/WMA

Selects track

Fast-forwards or

reverses the track

Selecting a track/folder

For MP3/WMA discs, select the desired folder,

then the desired track by repeating step 2.

• To return to the previous menu, press

BACK

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume before

playing a disc to avoid damaging the speakers

by the sudden increase of the output level.

Changing the display information

Disc title/Album name/performer (folder

name)*

Track title (file name)*

Current

track number with the elapsed playing time

Current track number with the clock

time

(back to the beginning)

* If the current disc is an audio CD, “NO NAME”

appears.

If an MP3/WMA file does not have Tag

information or <TAG DISPLAY> is set to

<TAG OFF> ( 14), folder name and file name

appear.

Selecting the playback modes

You can use only one of the following playback

modes at a time.

]

“REPEAT” “RANDOM”

REPEAT

TRACK RPT : Repeats current track

FOLDER RPT : Repeats current folder

RANDOM

FOLDER RND : Randomly plays all tracks

of current folder, then

tracks of next folders

ALL RND : Randomly plays all tracks

To cancel repeat play or random play, select

“RPT OFF” or “RND OFF.”

[Hold]

EN02-09_KD-R412_003A_5.indd 9EN02-09_KD-R412_003A_5.indd 9 10/12/09 10:32:22 AM10/12/09 10:32:22 AM

10 ENGLISH

Listening to the USB device (For KD-R412/KD-R411/KD-R35)

This unit can play MP3/WMA tracks stored in a USB device.

]

Turn on the

power.

All tracks will be played repeatedly until you change the

source or detach the USB device.

If a USB device has been attached...

Pressing

/SOURCE

turns on the power and

playback starts from where it has been stopped

previously.

• If a different USB device is currently attached,

playback starts from the beginning.

Stopping playback and detaching

the USB device

Straightly pull it out from the unit.

“NO USB” appears. Press

/SOURCE

to listen to

another playback source.

You can operate the USB device in the same

way you operate the files on a disc.

Caution on volume setting:

USB devices produce very little noise compared

with other sources. Lower the volume before

playing a USB to avoid damaging the speakers

by sudden increase of the output level.

Cautions:

• Avoid using the USB device if it might hinder

your safety driving.

• Do not pull out and attach the USB device

repeatedly while “READING” is shown on the

display.

• Do not start the car engine if a USB device is

connected.

• This unit may not be able to play the files

depending on the type of USB device.

• Operation and power supply may not work as

intended for some USB devices.

• You cannot connect a computer to the USB

input terminal of the unit.

• Make sure all important data has been backed

up to avoid losing the data.

• Do not leave a USB device in the car, expose

to direct sunlight, or high temperature to

avoid deformation or cause damages to the

device.

• Some USB devices may not work immediately

after attaching USB device or turn on the

power.

• For more details about USB operations, see

page 19.

USB input jack USB memory

EN10-17_KD-R412_003A_f.indd 10EN10-17_KD-R412_003A_f.indd 10 10/15/09 2:29:43 PM10/15/09 2:29:43 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung