JVC KD-R811 Bedienungsanleitung

FRANÇAIS

ENGLISH

GET0653-003A

[E]

EN, FR

For canceling the display demonstration, see page 4. / Pour annuler la démonstration des

affichages, référez-vous à la page 4.

CD RECEIVER / RÉCEPTEUR CD

KD-R811

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

For installation and connections, refer to the separate manual. / Pour l’installation et les

raccordements, se référer au manuel séparé.

Dear Customer,

This apparatus is in conformance with the valid

European directives and standards regarding

electromagnetic compatibility and electrical safety.

European representative of Victor Company of

Japan, Limited is:

JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg

Germany

Cher(e) client(e),

Cet appareil est conforme aux directives et

normes européennes en vigueur concernant la

compatibilité électromagnétique et à la sécurité

électrique.

Représentant européen de la société Victor

Company of Japan, Limited:

JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg

Allemagne

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

CoverRear_KD-R811_003A_1.indd 1-2CoverRear_KD-R811_003A_1.indd 1-2 12/14/09 2:25:42 PM12/14/09 2:25:42 PM

2ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with

optical instruments.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the unit while driving,

be sure to look around carefully or you may be

involved in a traffic accident.

For safety...

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Temperature inside the car...

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating

the unit.

Information for Users on Disposal of

Old Equipment and Batteries

[European Union only]

These symbols indicate that the product and

the battery with this symbol should not be

disposed as general household waste at its

end-of-life.

If you wish to dispose of this product and

the battery, please do so in accordance with

applicable national legislation or other rules

in your country and municipality.

By disposing of this product correctly, you

will help to conserve natural resources and

will help prevent potential negative effects

on the environment and human health.

Notice:

The sign Pb below the symbol for batteries

indicates that this battery contains lead.

Products

Battery

EN02-09_KD-R811_003A_2.indd 2EN02-09_KD-R811_003A_2.indd 2 12/24/09 9:34:52 AM12/24/09 9:34:52 AM

3ENGLISH

How to read this manual

The following icons/symbols are used to

indicate:

Press and hold the button(s)

until the desired operation

begins.

Turn the control dial.

Turn the control dial

to make a selection,

then press to confirm.

( XX) Reference page number

<XXXX> Menu setting item

Continued on the next page

How to attach/detach the control

panel

How to reset your unit

Your preset adjustments

will also be erased (except

the registered Bluetooth

device). ( 15)

How to forcibly eject a disc

• You can forcibly eject the loaded disc even

if the disc is locked. To lock/unlock the disc,

11.

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

CONTENTS

3 How to read this manual

3 How to attach/detach the control

panel

3 How to reset your unit

3 How to forcibly eject a disc

Canceling the display

demonstration

4 Setting the clock

5 Preparing the remote controller

(RM-RK50)

6 Basic operations

8 Listening to the radio

11 Listening to a disc

12 Listening to the USB device

14 Using the Bluetooth® device

16 Using a Bluetooth mobile phone

19 Using a Bluetooth audio player

20 Changing the Bluetooth settings

22 Listening to the iPod/iPhone

25 Listening to the other external

components

26 Selecting a preset sound mode

27 Menu operations

34 More about this unit

39 Maintenance

40 Troubleshooting

44 Specifications

[Hold]

EN02-09_KD-R811_003A_4.indd 3EN02-09_KD-R811_003A_4.indd 3 12/30/09 2:49:59 PM12/30/09 2:49:59 PM

4ENGLISH

1 Turn on the power.

SET UP

DEMO

Clock

PRO EQ

3 Select <DEMO>.

DEMO

Off

Setting the clock

4 Select <Off>.

DEMO

Off

5 Finish the procedure.

Canceling the display demonstration

(Initial setting)

[Hold]

7 Select <24H/12H>.

Clock Set Clock

24H/12H

Clock Adjust

8 Select <24Hours> or <12Hours>.

24H/12H

24Hours

12Hours

9 Finish the procedure.

1 Turn on the power.

SET UP

DEMO

Clock

PRO EQ

3 Select <Clock>.

SET UP

DEMO

Clock

PRO EQ

4 Select <Set Clock>.

Clock

24H/12H

Clock Adjust

Set Clock

5 Adjust the hour.

Set Clock

0 : 00 AM

6 Adjust the minute.

Set Clock

Clock Set Clock

24H/12H

Clock Adjust

0: 00 AM

(Initial setting)

[Hold]

EN02-09_KD-R811_003A_2.indd 4EN02-09_KD-R811_003A_2.indd 4 12/24/09 9:34:53 AM12/24/09 9:34:53 AM

5ENGLISH

Warning (to prevent accidents and

damage):

• Do not install any battery other than CR2025

or its equivalent.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct

sunlight for a long time.

• Store the battery in a place where children

cannot reach.

• Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

• Do not leave the battery with other metallic

materials.

• Do not poke the battery with tweezers or

similar tools.

• Wrap the battery with tape and insulate when

throwing away or saving it.

This unit is equipped with the steering wheel

remote control function.

Before operating, connect a JVC's OE remote

adapter (not supplied) which matches your car

to the steering wheel remote input terminal on

the rear of the unit.

• For details, refer also to the instructions

supplied with the remote adapter.

Preparing the remote controller (RM-RK50)

When you use the remote controller for the first

time, pull out the insulation sheet.

If the effectiveness of the remote controller

decreases, replace the battery.

Replacing the lithium coin battery

CR2025

Caution:

• Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

• Battery shall not be exposed to excessive heat

such as sunshine, fire, or the like.

Insulation sheet

EN02-09_KD-R811_003A_2.indd 5EN02-09_KD-R811_003A_2.indd 5 12/24/09 9:34:54 AM12/24/09 9:34:54 AM

6ENGLISH

Basic operations

Control dial

Ejects the disc Loading slot USB (Universal Serial Bus) input terminalDisplay window

Detaches the panel

When you press or hold the following button(s)...

Main unit Remote

controller General operation

Turns on.

• When the power is on, pressing /I/ATT on the remote controller

also mutes the sound or pauses. Press /I/ATT again to cancel

muting or resume playback.

Turns off if pressed and held.

Selects the available sources (if the power is turned on).

• If the source is ready, playback also starts.

Adjusts the volume level.

— Selects items.

—

• Mutes the sound while listening to a source. If the source is “CD,”

“USB FRONT/USB REAR” or “iPod FRONT/iPod REAR,” playback

pauses. Press the control dial again to cancel muting or resume

playback.

• Confirms selection.

Remote sensor

• DO NOT expose to

bright sunlight.

Auxiliary

input jack

EN02-09_KD-R811_003A_2.indd 6EN02-09_KD-R811_003A_2.indd 6 12/24/09 9:34:54 AM12/24/09 9:34:54 AM

7ENGLISH

Main unit Remote

controller General operation

Selects the sound mode.

• Enters tone level adjustment directly ( 26) if pressed and held

EQ/BASS-TRE on the main unit.

—

• Enters “Call Menu” screen* or answers incoming call when the unit

rings.

• Ends a call if pressed and held after a phone call conversation.

• Switches the connected mobile phone to the last connected

mobile phone if pressed and held. ( 19)

* If there is no call list, the unit beeps.

—

• Activates/deactivates TA Standby Reception.

• Enters PTY Searching mode if pressed and held.

• Returns to the previous menu.

• Switches the controlling terminal for iPod playback if pressed and

held. ( 22, 31)

—Power off : Checks the current clock time.

Power on : Changes the display information and pattern.

Changing the display information and pattern

Ex.: When tuner is selected as the source

Caution:

If the temperature inside the car is below 0°C,

the movement of animation and text scroll will

be halted on the display to prevent the display

from being blurred. appears on the display.

When the temperature increases, and the

operating temperature is resumed, these

functions will start working again.

Caution on volume setting:

Digital devices (CD/USB) produce very little

noise compared with other sources. Lower the

volume before playing these digital sources

to avoid damaging the speakers by sudden

increase of the output level.

Source operation display Audio level meter display

(<Level Meter>, 29)

EN02-09_KD-R811_003A_2.indd 7EN02-09_KD-R811_003A_2.indd 7 12/24/09 9:34:54 AM12/24/09 9:34:54 AM

8ENGLISH

Manual search

“M” appears, then press

the button repeatedly.

When an FM stereo broadcast is

hard to receive

]

<Tuner>

]

]

<Mono>

Reception improves, but stereo effect

will be lost.

To restore the stereo effect, repeat the same

procedure to select <Stereo>.

Automatic presetting (FM)—

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

]

<Tuner>

]

<SSM>

]

<SSM 01 – 06 / SSM 07 – 12 /

SSM 13 – 18>

“SSM” appears and local stations with

the strongest signals are searched and

stored automatically.

To preset another 6 stations, repeat the above

procedure by selecting one of the other 6 SSM

setting ranges.

[Hold]

Listening to the radio

]

“FM” or “AM”

lights up when receiving an FM stereo broadcast

with sufficient signal strength.

EN02-09_KD-R811_003A_2.indd 8EN02-09_KD-R811_003A_2.indd 8 12/24/09 9:34:55 AM12/24/09 9:34:55 AM

9ENGLISH

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6

stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset

number “4.”

]

“92.50MHz”

]

Shows the “Preset Mode” screen.

]

Selects preset number “4.”

“04” flashes.

Selecting a preset station

Using the remote controller

∞

: Changes the preset

stations

: Searches for stations

[Hold]

The following features are available

only for FM Radio Data System stations.

Searching for your favourite

FM Radio Data System

programme—PTY Search

You can tune in to a station broadcasting your

favourite programme by searching for a PTY

code.

The last selected PTY code appears.

]

Select one of your favourite

programme types or a PTY code, and

start searching.

If there is a station broadcasting a

programme of the same PTY code as you

have selected, that station is tuned in.

PTY codes: News, Affairs, Info, Sport, Educate,

Drama, Culture, Science, Varied, Pop M (music),

Rock M (music), Easy M (music), Light M (music),

Classics, Other M (music), Weather, Finance,

Children, Social, Religion, Phone In, Travel,

Leisure, Jazz, Country, Nation M (music), Oldies,

Folk M (music), Document

[Hold]

EN02-09_KD-R811_003A_2.indd 9EN02-09_KD-R811_003A_2.indd 9 12/24/09 9:34:55 AM12/24/09 9:34:55 AM

10 ENGLISH

Standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

any source other than AM.

• The volume changes to the preset TA volume

level if the current level is lower than the

preset level. (<TA Volume>, 30)

To activate TA Standby Reception

If the TP indicator lights up, TA

Standby Reception is activated.

If the TP indicator flashes, TA

Standby Reception is not yet

activated.

• To activate the reception, tune in to another

station providing Radio Data System signals

required for TA Standby Reception.

• To deactivate the reception, press

T/P BACK

again.

PTY Standby Reception

PTY Standby Reception allows the unit to

switch temporarily to your favourite PTY

programme from any source other than AM.

To activate and select your favourite

PTY code for PTY Standby Reception, see

<PTY-Standby> ( 30).

If the PTY indicator lights up, PTY Standby

Reception is activated.

If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

• To activate the reception, tune in to another

station providing these signals.

• To deactivate the reception, select <Off>

( 30) for the PTY code. The PTY indicator

goes off.

• The unit will not switch to Traffic

Announcement or PTY programme when

a call connection is established through

“BT FRONT/BT REAR.”

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is

not sufficient enough, this unit automatically

tunes in to another FM Radio Data System

station of the same network, possibly

broadcasting the same programme with

stronger signals.

Programme A broadcasting on different

frequency areas (01 – 05)

To change the Network-Tracking Reception

setting, see <AF Regional> ( 30).

Automatic station selection—

Programme Search

Usually when you select a preset number, the

station preset in that number is tuned in.

If the signals from the FM Radio Data System

preset station are not sufficient for good

reception, this unit, using the AF data, tunes in

to another frequency possibly broadcasting the

same programme as the original preset station

is broadcasting. (<P-Search>, 30)

EN10-19_KD-R811_003A_2.indd 10EN10-19_KD-R811_003A_2.indd 10 12/24/09 9:35:14 AM12/24/09 9:35:14 AM

Andere Handbücher für KD-R811

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung