JVC KD-R90BT Bedienungsanleitung

ﻮﻳﺩﺍﺭﻊﻣﻞﻐﺸﻣCD/ﻩﺪﻧﺮﻴﮔﯽﺳﯼﺩ

ءﺎﻐﻟﻹﺽﺍﺮﻌﺘﺳﺍﺔﺷﺎﺷ،ﺽﺮﻌﻟﺍﻊﺟﺍﺭﺔﺤﻔﺻ٤/ .

ﯼﺍﺮﺑﻮﻐﻟ،ﺮﮕﺸﻳﺎﻤﻧﻪﺑﻪﺤﻔﺻ۴ﻪﻌﺟﺍﺮﻣﺪﻴﺋﺎﻤﻧ.

ﻞﻴﻟﺩﺕﺎﻤﻴﻠﻌﺘﻟﺍ

ﻞﻤﻌﻟﺍﺭﻮﺘﺳﺩﺎﻫ

KEN,RU,TH,AR,PE

©2012JVCKENWOODCorporation 0212DTSSANJEIN

KD-R90BT

ﺕﺎﻴﻠﻤﻌﻟﺐﻴﻛﺮﺘﻟﺍ،ﺕﻼﻴﺻﻮﺘﻟﺍﻭﻰﺟﺮﻳﺔﻌﺟﺍﺮﻣﺐﻴﺘﻛﺕﺎﻤﻴﻠﻌﺘﻟﺍﻞﺼﻔﻨﻤﻟﺍ.

ﯼﺍﺮﺑﺐﺼﻧﻭﻞﺼﺘﻣ،ﻥﺩﺮﮐﻪﺑﻪﭼﺮﺘﻓﺩﯼﺎﻤﻨﻫﺍﺭﻪﻃﻮﺑﺮﻣﻉﻮﺟﺭﺩﻮﺷ.

CD RECEIVER / РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ

КОМПАКТ-ДИСКОВ / ϟΦυϙϧϏΩϟχΕλ CD

For canceling the display demonstration, see page 4. /

Информацию об отмене демонстрации функций дисплея см. на стр. 4. /

ζϛιϗϧύλΖϔ 4 ϟπϙϧϏτΣϟχϖΣΣϔυόϔκϖηςϔπνυϒΣϏμ

ENGLISH

РУCCKИЙ

ไทย

INSTRUCTIONS

ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

ΦϕϠλϒλϕ

GET0802001A

[U]

KD-R90BT

For installation and connections, refer to the separate manual.

Указания по установке и выполнению соединений приводятся в отдельной инструкции.

ΣυϚεϔζϛΦϛΕσϙϏιϗϧϠτΣηΕϔΩύϔΣ ϢλΣϔυηϖζηϓϨΩϠχϒΣϔυϟάϙϧϏσηΕϏ

Instructions CD RECEIVER KD-R90BT

KD-R90BTU_Cover.indd 1KD-R90BTU_Cover.indd 1 2/17/2012 4:59:25 PM2/17/2012 4:59:25 PM

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit;

leave all servicing to qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view

directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

Warning:

Stop the car before operating the unit.

Caution:

Adjust the volume so that you can hear sounds

outside the car. Driving with the volume too high

may cause an accident.

Avoid using the USB device or iPod/iPhone if it

might hinder driving safety.

Caution on volume setting:

Digital devices (CD/USB) produce very little noise

compared with other sources. Lower the volume

before playing these digital sources to avoid

damaging the speakers by the sudden increase of

the output level.

Temperature inside the car:

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

appears on the display and animation/text

scroll will be stopped to prevent the display from

being blurred when the temperature falls below

0°C. Once operating temperature is normalised,

these functions will start working again.

Condensation:

When the car is air-conditioned, moisture may

collect on the laser lens. This may cause disc read

errors. In this case, remove the disc and wait for

the moisture to evaporate.

2|ޓENGLISH

2012/2/15ޓ20:10:22KD-R90BT_U_EN

How to attach the control panel

How to detach the control panel

Avoid touching the connectors.

How to reset your unit

Your preset adjustments will also

be erased.

How to forcibly eject a disc

(Hold)

Be careful not to drop the disc when it ejects.

If this does not work, reset your unit.

Maintenance

Cleaning the unit

Wipe off the dirt on the panel with a dry silicon or

soft cloth. Failure to observe this precaution may

result in damage to the unit.

Cleaning the connector

Wipe off dirt on the connector of the unit and

panel. Use a cotton swab or cloth.

Contents

Preparation ............................................................ 4

Canceling the display demonstration

Setting the clock

Basic operations ................................................... 4

Radio ........................................................................ 6

CD/USB .................................................................... 8

iPod/iPhone

............................................................. 9

Quick Search ....................................................... 10

External components ...................................... 10

Bluetooth姞connection

..................................... 11

Bluetooth mobile phone ................................ 13

Bluetooth audio player ................................... 17

Illumination color adjustments .................... 18

Brightness adjustments .................................. 19

Sound adjustments .......................................... 19

Menu operations ............................................... 24

Remote controller

............................................... 27

Additional information ................................... 27

Troubleshooting ................................................ 30

Specifications ..................................................... 32

How to read this manual:

This manual mainly explains operations using

the buttons on the control panel.

< > indicates the displays on the control

panel.

[XX] indicates the initial setting of a menu

item.

ENGLISHޓ|3

2012/2/15ޓ20:10:22KD-R90BT_U_EN

Canceling the display

demonstration

The display demonstration is always turned on

unless you cancel it.

SET UP

DEMO

Clock

PUSH

(Hold)

(Initial setting)

DEMO

Off

PUSH

DEMO

Off

PUSH

3Select <Off>.

4Press MENU to exit.

Setting the clock

SET UP

DEMO

Clock

PUSH

(Hold)

Clock

DEMO

Clock

Color

PUSH

2Select <Clock>.

Clock

Clock Display

Set Clock

24/12H

PUSH

3Select <Set Clock>.

1 : 00AM

Set Clock

PUSH

(Initial setting)

4Adjust the hour.

1 : 00AM

Set Clock

PUSH

5Adjust the minute.

Clock

Set Clock

Clock Adjust

24/12H

PUSH

6Select <24H/12H>.

7Select <24Hours> or <12Hours>.

8Press MENU to exit.

Basic operations

Display information

Changes the display information. (Press)

Scrolls the current display information. (Hold)

Source Display (Normal display pattern)*1

Radio Station name/Frequency

CD/USB/Bluetooth Audio Track title/Album title/Artist*

*“No Name”appears for conventional CDs or if not

recorded.

iPod/iPhone (Headunit Mode/iPod

Mode)

iPod/iPhone (Application Mode) Application Mode

External Components (AUX) Aux In

*1 Display information varies for large font and large clock display patterns.

Preparation

4|ޓENGLISH

2012/2/15ޓ20:10:22KD-R90BT_U_EN

Remote controller

Display window

Control panel

DO NOT expose to bright sunlight.

Remote sensor

Control dial Aim the remote controller directly at the sensor.

Flips down the panel

When you press or hold the following button(s)...

Control panel Remote

controller General function

/SOURCE —

Turns on.

Turns off. (Hold)

Press the /SOURCE button on the control panel and turn

the control dial within 2 seconds to select the source.

SOURCE Press repeatedly to select the source.

Control dial

(turn)

VOL - / + Adjusts the volume level.

— Selects items.

Control dial

(press)

)

Mutes the sound or pauses playback.

Press the button again to cancel muting or resume

playback.

— Confirms selection.

EQ SOUND Selects the preset sound mode. ('page 19)

—

Enters “Hands-Free”menu ('page 14), or answers

incoming call when the unit rings.

Ends a call. (Hold)

— Returns to the previous menu.

/ / Selects a preset station. ('page 6)

Selects MP3/WMA/WAV folder. ('page 8)

/ / 

Searches for a station automatically. ('page 6)

Searches for a station manually. (Hold)

Selects track. ('page 8, 9, 17)

Fast-forwards or reverses track. (Hold)

Basic operations

ENGLISHޓ|5

2012/2/15ޓ20:10:22KD-R90BT_U_EN

Searching for a station

88.3 MHz

ST NATURAL 1:00AM

BSelect <FM> or <AM>.

Auto search. (Press)

Manual search. (Hold)

“M”appears, then press the button repeatedly.

“ST”lights up when receiving an FM stereo broadcast with sufficient signal strength.

Storing stations in memory

Manual presetting

You can preset up to 18 stations for FM and 6

stations for AM.

While listening to a station...

(Hold)

“Preset Mode”screen appears.

The preset number flashes.

2Select preset number.

Auto presetting (FM only)

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

(Hold)

-<Tuner>

-<SSM>

-<SSM 01 – 06>

“SSM”appears. When all the stations are stored,

“SSM”disappears.

To preset <SSM 07 – 12>/<SSM 13 – 18>,

repeat steps 1 and 2.

Selecting a preset station

You can also select a preset station using / .

Radio

6|ޓENGLISH

2012/2/15ޓ20:10:22KD-R90BT_U_EN

Setting the Radio Timer

You can tune in to a preset station at a specific

time regardless of the current source.

(Hold)

-<Tuner>

-<Radio Timer>

-<Off>/<Once>/

<Daily>

[Off] Cancels Radio Timer.

Once Activates once.

Daily Activates daily.

-<FM>/<AM>

-<1>... <18>for FM/

<1>... <6>for AM

3Select the preset station.

4Set the activation time.

5Press MENU to exit.

lights up after the Radio Timer has been set.

Only one timer can be set. Setting a new timer

will override the previous setting.

The Radio Timer will not activate if the unit is

turned off or if <AM>is set to <Hide>after

selecting an AM station for the timer.

('page 26)

Naming the stations

You can assign names for up to 30 station

frequencies (FM and AM) using a maximum of 8

characters for each name.

1Select <FM> or <AM>.

(Hold)

2Enter “Name Entry” menu.

Move

Select

Select the desired character (see below) or a

space, then move to the next (or previous)

character position.

Repeat step 3 until you have finished entering the

name.

3Enter the desired name.

4Press the control dial to confirm.

If you try to assign names to more than 30

station frequencies, “Name Full”appears.

Delete unwanted names before assignment.

Available characters

A– Z(uppercase), a– z(lowercase), 0– 9

(numbers), and the following symbols:

!”#

$%& ’ ( ) +,

–./:;<=>?@

–

To erase the entire name, press and hold DISP

after step 2, then press the control dial.

Radio

ENGLISHޓ|7

2012/2/15ޓ20:10:22KD-R90BT_U_EN

Playing a CD/USB device

Label side

The source changes to “CD”and playback starts.

USB cable from the rear

of the unit

The source changes to “USB”and playback starts.

This unit can play MP3/WMA files stored in CD-R, CD-RW, and MP3/WMA/WAV files in USB mass

storage device (such as a USB memory and Digital Audio Player).

Make sure all important data has been backed up. We shall bear no responsibility for any loss of data

in USB mass storage class device while using this system.

Ejected disc not removed within 15 seconds will reload automatically.

If the disc cannot be ejected, 'page 3.

Selecting a folder/track

Selects folder.

(For MP3/WMA/WAV)

Selects track. (Press)

Fast-forwards or reverses the

track. (Hold)

Selecting a track/folder from

the list

2Select a folder. (For MP3/WMA/WAV)

For MP3/WMA/WAV

If there are many folders or tracks, you can fast

search for the desired folder or track by turning

the control dial quickly, or use Quick Search

('page 10).

3Select a track.

Selecting the playback modes

You can select one of the following playback

modes at a time.

(Hold)

Repeat 

Off Cancels repeat playback.

Track Repeats current track.

Folder * Repeats current folder.

Random 

Off Cancels random playback.

Folder *

Randomly plays all tracks of

current folder, then tracks of

next folders.

All Randomly plays all tracks.

* For MP3/WMA/WAV

CD/USB

8|ޓENGLISH

2012/2/15ޓ20:10:22KD-R90BT_U_EN

iPod/iPhone

Playing an iPod/iPhone

USB cable from the rear

of the unit

USB 2.0 cable (not supplied)*

The source changes to “iPod-1/iPod-2”and

playback starts.

* Recommend to use a cable suitable for car use.

Selecting the control mode

-<Headunit Mode>/

<iPod Mode>/

<Application Mode>

Headunit

Mode

Controls iPod playback through

this unit.

iPod Mode Controls iPod playback from the

iPod/iPhone.

Application

Mode

The sound of any functions

(music, games, applications, etc.)

running on the connected iPod/

iPhone is emitted through the

speakers connected to this unit.

You can also change the setting using <iPod

Switch>in the menu. ('page 26)

Selecting a track

Applicable under <Headunit Mode>/<iPod

Mode>only.

For <Application Mode>, applicable only for

some audio applications.

Selects track/chapter. (Press)

Fast-forwards or reverses the

track. (Hold)

Selecting a track from the list

Applicable under <Headunit Mode>only.

(Hold)

Playlists)Artists)Albums)Songs)

Podcasts)Genres)Composers)

Audiobooks)(back to the beginning)

2Select the desired list.

Repeat this step until the desired track is selected.

If the selected menu contains many tracks, you

can fast search for the desired track by turning

the control dial quickly, or use Quick Search

('page 10).

3Select the desired track.

Selecting the playback modes

Applicable under <Headunit Mode>only.

You can select one of the following playback

modes at a time.

(Hold)

Repeat 

Off Cancels repeat playback.

One Functions the same as “Repeat

One”of the iPod.

All Functions the same as “Repeat

All”of the iPod.

Random 

Off Cancels random playback.

Song Functions the same as “Shuffle

Songs”of the iPod.

Album Functions the same as “Shuffle

Albums”of the iPod.

“Album”is not applicable for some iPod/

iPhone.

iPod/iPhone application

You can operate JVC original application with this

unit in <Application Mode>. For more details, visit

JVC website: <http://www3.jvckenwood.com/

english/car/index.html> (English website only).

ENGLISHޓ|9

2012/2/15ޓ20:10:22KD-R90BT_U_EN

If you have many folders/tracks/contacts, you can search through them quickly according to the first

character (A to Z, 0 to 9 and OTHERS).

1Enter list menu or “Hands-Free” menu.

CD (MP3/WMA)/

USB (MP3/WMA/WAV)

iPod/iPhone Bluetooth phonebook

Select the desired list. Select <Phonebook>.

“OTHERS”appears if the first character is not A to

Z or 0 to 9, such as #, -, !, etc.

2Select the desired character (A to Z, 0 to 9

and OTHERS).

For CD/USB and iPod/iPhone, repeat step 3 until

the desired track is selected.

Searching may not work on some of the layers

of the selected menu (for iPod/iPhone).

3Select your desired folder/track/contact.

External components

You can connect an external component to the AUX (auxiliary) cable from the rear of the unit.

For details, refer also to the instructions supplied with the external components.

Playing an external component

from AUX

AUX

Portable audio

player, etc.

3.5 mm stereo mini plug

(not supplied)

Use a 3-terminal plug head

stereo mini plug for optimum

audio output.

1Connect to AUX cable from the rear of the

unit.

2Select <AUX IN>.

3Turn on the connected component and

start playing the source.

Quick Search

10 |ޓENGLISH

2012/2/15ޓ20:10:22KD-R90BT_U_EN

Andere Handbücher für KD-R90BT

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung