JVC KD-S50J Bedienungsanleitung

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

GET0077-001A

[J]

For Customer Use:

Enter below the Model No. and

Serial No. which are located on

the top or bottom of the cabinet.

Retain this information for future

reference.

Model No.

Serial No.

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

COMPACT

DIGITAL AUDIO

RECEPTEUR CD KD-S50

RECEPTOR CON CD KD-S50

CD RECEIVER KD-S50

ENGLISH

ESPAÑOL

FRANÇAIS

KD-S50

160W

CoverKD-S50[J] 11/6/01, 2:12 PM3

ENGLISH

INFORMATION (For USA)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT FOR LASER PRODUCTS

Precautions:

1. CLASS 1 LASER PRODUCT

2. DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct

exposure to beam.

3. CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all

servicing to qualified service personnel.

4. CAUTION: This CD player uses invisible laser radiation, however, is equipped with safety switches

to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.

5. CAUTION: Use of controls, adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

(Standby/On/ATT)

How to reset your unit

Press and hold both the SEL (Select) and

(Standby/On/ATT) buttons at the same time for several

seconds.

This will reset the built-in microcomputer.

NOTES:

Your preset adjustments — such as preset channels or sound

adjustments — will also be erased.

If a CD is in the unit, it will eject when you reset the unit. Pay

attention not to drop the CD. SEL (Select)

EN02-03KD-S50[J] 11/6/01, 2:14 PM2

ENGLISH

CONTENTS

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

How to reset your unit .................................. 2

LOCATION OF THE BUTTONS ...............4

Control panel ............................................... 4

BASIC OPERATIONS ..........................5

Turning on the power ................................... 5

RADIO BASIC OPERATIONS .................6

Listening to the radio ................................... 6

Storing station in memory ............................ 7

Tuning into a preset station .......................... 8

Other convenient tuner functions ................. 8

CD OPERATIONS ..............................9

Playing a CD ................................................ 9

Locating a track or a particular portion

on a CD .................................................. 10

Selecting CD playback modes ................... 10

Prohibiting CD ejection .............................. 11

SOUND ADJUSTMENTS .................... 12

Adjusting the sound ................................... 12

Turning on/off the loudness function ............. 12

Using the Sound Control Memory (SCM) .. 13

Storing your own sound adjustments......... 14

OTHER MAIN FUNCTIONS ................. 15

Setting the clock ........................................ 15

To cancel advanced SCM .......................... 15

Selecting the level display .......................... 16

Detaching the control panel ....................... 17

MAINTENANCE .............................. 18

Handling CDs ............................................ 18

TROUBLESHOOTING ....................... 19

SPECIFICATIONS ............................ 20

BEFORE USE

For safety....

• Do not raise the volume level too much, as this

will block outside sounds, making driving

dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car....

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

EN02-03KD-S50[J] 11/6/01, 2:14 PM3

ENGLISH

LOCATION OF THE BUTTONS

(standby/on/attenuator) button

+/– button

LOUD button

MO (monaural) button

RND (random) button

Display window

0(eject) button

CD button

FM button

AM button

SEL (select) button

4/ ¢buttons

• Also functions as SSM buttons when

pressed together.

Number buttons

DISP (display) button

RPT (repeat) button

SCAN button

SCM (sound control memory) button

(control panel release) button

Display window

Volume (or audio) level indicator

Equalization Pattern indicator

Tuner reception indicators

MO (monaural), ST (stereo)

RND (random) indicator

;

RPT (repeat) indicator

"SCM" indicator

LOUD indicator

Sound mode indicators

BEAT, SOFT, POP

CD indicator

Band indicators

FM1, FM2, FM3

Main display

CD IN indicator

Display window

12 345 6789

pq w erty

;as

Control panel

EN04-04KD-S50[J]/6th 11/6/01, 2:14 PM4

ENGLISH

Adjust the sound as you want (see

page 12 – 14).

To drop the volume in a moment

Press briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To turn off the power

Press and hold until "SEE YOU"

appears on the display.

Note:

When you use this unit for the first time, set the built-

in clock correctly, see page 15

Turning on the power

Turn on the power.

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

Select the source.

Adjust the volume.

BASIC OPERATIONS

C D

A M

F M

Volume level indicator

(see page 16)

Volume level appears

To increase the volume.

To decrease the volume.

To operate the tuner (FM or AM),

see pages 6 –8

To operate the CD,

see pages 9 –11.

CAUTION on volume setting

CDs produce very little noise compared with other

sources. If the volume level is adjusted for the tuner,

for example, the speakers may be damaged by the

sudden increase in the output level. Therefore, lower

the volume before playing a disc and adjust it as

required during playback.

160W

EN05-05KD-S50[J]/9th 11/6/01, 2:13 PM5

ENGLISH

RADIO BASIC OPERATIONS

Listening to the radio

You can use either automatic searching or manual

searching to tune into a particular station.

Searching a station automatically:

Auto search

Select the band (FM 1 – 3, AM).

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Start searching a station.

When a station is received, searching stops.

A M

F M

FM1 FM2

FM3

selected band appears

Volume level indicator (see page 16)

Press ¢to search

stations of higher

frequencies.

Press 4to search

stations of lower

frequencies.

To stop searching before a station is received,

press the same button you have pressed for

searching.

Searching a station manually:

Manual search

Select the band (FM 1 –3, AM).

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Press and hold ¢or 4until

“M”(manual) starts flashing on the

display.

A M

F M

FM1 FM2

FM3

selected band appears

160W

EN06-08KD-S50[J]/8th 11/6/01, 2:13 PM6

ENGLISH

Tune into a station you want while “M”

is flashing.

• If you release your finger from the button, the

manual mode will automatically turn off after 5

seconds.

• If you hold down the button, the frequency keeps

changing until you release the button.

When an FM stereo broadcast is hard to

receive:

Press MO/RND (monaural/random) while listening

to an FM stereo broadcast.

• Each time you press the button, the MO indicator

lights up and goes off alternately.

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved (the ST indicator goes

off).

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

•Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band

(FM1, FM2 and FM3).

Select the band (FM1 –3) you want

to store FM stations into.

•Each time you press the button, the FM

band changes as follows:

Press and hold both buttons for

more than 2 seconds.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3.)

These stations are preset in the number buttons –

No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

A M

F M

FM1 FM2

FM3

Press ¢to search

stations of higher

frequencies.

Press 4to search

stations of lower

frequencies.

MO/RND

“SSM”appears, then disappears when automatic

preset is over.

Lights up when receiving an

FM broadcast in stereo.

EN06-08KD-S50[J]/8th 11/6/01, 2:13 PM7

ENGLISH

Manual preset

You can preset up to 6 stations in each band (FM1,

FM2, FM3 and AM) manually.

Ex: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

Select the band (FM1 –3) you want to

store FM stations into (in this example,

FM1).

•Each time you press the button, the FM

band changes as follows:

Tune into a station of 88.3 MHz.

Press and hold the number button (in

this example, 1) for more than 2

seconds.

Repeat the above procedure to store

other stations into other preset

numbers.

Other convenient tuner

functions

Scanning broadcast station

When you press RPT/SCAN while listening to the

radio, station scanning starts. Each time a broadcast

is tuned in, scanning stops for about 5 seconds

(tuned frequency number flashes on the display),

and you can check what program is now being

broadcasted.

If you want to listen to that program, press the same

button again to stop scanning.

Press ¢to tune

stations of higher

frequencies.

Press 4to tune

stations of lower

frequencies.

”P1”flashes for a few seconds.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased whent the power supply to

the memory circuit is interrupted (for example, during

battery replacement). If this occurs, preset the stations

again.

Tuning into a preset station

You can easily tune into a preset station.

Remember that you must store stations first. If you

have not stored them yet, see ”Storing stations in

memory”on page 7 and 8.

Select the band (FM1 –3, AM).

Select the number (1 –6) for the preset

station you want.

A M

F M

FM1 FM2

FM3

RPT

SCAN

A M

F M

FM1 FM2

FM3

7 8 9 10 11 12

EN06-08KD-S50[J]/8th 11/6/01, 2:13 PM8

ENGLISH

Playing a CD

Insert a disc into the loading slot.

The unit turns on,

draws a CD and starts

playback automatically.

Note:

When a CD is inserted

upside down, the CD

automatically ejects.

Note on One-Touch Operation:

When a CD is already in the loading slot, pressing CD

turns on the unit and starts playback automatically.

CD OPERATIONS

To stop play and eject the CD

Press 0.

CD play stops and the CD automatically ejects

from the loading slot. The source changes to the

tuner (you will hear the last received station).

If you change the source to AM/FM, the CD play

also stops (without ejecting the CD this time).

Notes:

• If the ejected disc is not removed for about 15 seconds,

the disc is automatically inserted again into the

loading slot to protect it from dust. (CD play will not

start this time.)

• You can eject the CD even when the unit is turned off.

Elapsed playing time

Total playing time of

the inserted disc

Total track number of

the inserted disc

Current track

The CD IN indicator lights up

160W

EN09-11KD-S50[J]/f 11/6/01, 2:16 PM9

ENGLISH

Locating a track or a particular

portion on a CD

To fast-forward or reverse the track

To go to the next tracks or the previous

tracks

To go to a particular track directly

Press the number button corresponding to the track

number to start its playback.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

Press and hold ¢,

while playing a CD, to fast

forward the track.

Press and hold 4,

while playing a CD, to

reverse the track.

Press ¢briefly, while

playing a CD, to go ahead

to the beginning of the next

track. Each time you press

the button consecutively,

the beginning of the next

tracks is located and played

back.

Press 4briefly, while

playing a CD, to go back to

the beginning of the current

track. Each time you press

the button consecutively, the

beginning of the previous

tracks is located and played

back.

Selecting CD playback modes

To play back tracks at random (Random Play)

You can play back all tracks on the CD at random.

Each time you press MO/RND (Mono/Random)

while playing a CD, CD random play mode turns

on and off alternatively.

When the random mode is turned on, the RND

indicator lights up on the display and a track

randomly selected starts playing.

To play back tracks repeatedly (Repeat Play)

You can play back the current track repeatedly.

Each time you press RPT/SCAN (Repeat/Scan)

while playing a CD, CD repeat play mode turns on

and off alternatively.

When the repeat mode is turned on, the RPT

indicator lights up on the display.

7 8 9 10 11 12

MO/RND

RPT

SCAN

Track number

of the currently

playing track

The RPT

indicator

The RND

indicator

EN09-11KD-S50[J]/f 11/6/01, 2:16 PM10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung