JVC KD-X220 Bedienungsanleitung

ENGLISH

FRANÇAIS

ESPAÑOL

B5A-0115-00 [J]

KD-X220

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE

MANUEL D’INSTRUCTIONS

RECEPTOR DE MEDIOS DIGITALES

MANUAL DE INSTRUCCIONES

Please read all instructions carefully before

operation to obtain the best possible performance

from the unit.

Veuillez lires les instructions attentivement avant

d’utiliser l’appareil afin d’obtenir les meilleures

performances possibles de l’appareil.

Por favor lea detenidamente este manual para

comprender a fondo todas las instrucciones y

obtener un máximo disfrute de esta unidad.

For customer Use:

Enter below the Model No. and Serial No. which are

located on the top or bottom of the cabinet. Retain this

information for future reference.

Model No.

Serial No.

JS_JVC_KD_X220_J_C.indd 1 24/9/2014 4:48:45 PM

CONTENTS BEFORE USE

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of

the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded

data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short

circuit.

Remote control (RM-RK52):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or

equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used

batteries promptly. If swallowed, contact a physician immediately.

BEFORE USE 2

BASICS 3

GETTING STARTED 4

USB / iPod / ANDROID 5

RADIO 7

AUX 8

Pandora® 9

iHeartRadio® 10

AUDIO SETTINGS 11

DISPLAY SETTINGS 13

MORE INFORMATION 14

TROUBLESHOOTING 15

SPECIFICATIONS 17

INSTALLATION /

CONNECTION 18 How to read this manual

• Operations are explained mainly using buttons on the faceplate.

• [

] indicates the selected items.

• (

) indicates references are available on the stated page.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft

cloth.

Cleaning the connector: Detach the faceplate and clean the connector

gently with a cotton swab, being careful not to damage the connector. Connector (on the reverse

side of the faceplate)

JS_JVC_KD_X220_J_EN_2.indd 2 11/9/2014 4:42:33 PM

ENGLISH

BASICS

To On the faceplate On the remote control

Turn on the power Press .

• Press and hold to turn off the power. —

Adjust the volume Turn the volume knob. Press or .

Press the volume knob to mute the sound or pause playback.

• Press again to cancel. Press to mute the sound or pause playback.

• Press again to cancel.

Select a source • Press repeatedly.

• Press , then turn the volume knob within 2 seconds.

• Press to select iPod or USB source directly.

Press SOURCE repeatedly.

Change the display

information

Press repeatedly. (

15

)—

Attach

How to reset

Detach

Your preset adjustments

will also be erased.

Remote control (RM-RK52)Faceplate

Volume knob

(turn/press) Display window

Detach button How to replace the battery

Pull out the insulation sheet

when using for the first time.

Remote sensor (Do not expose

to bright sunlight.)

JS_JVC_KD_X220_J_EN_2.indd 3 18/9/2014 9:55:02 AM

GETTING STARTED

Cancel the demonstration

1 Press and hold .

2 Turn the volume knob to select [

DEMO

], then press the knob.

3 Turn the volume knob to select [

DEMOOFF

], then press the knob.

4 Press to exit.

Set the clock

1 Press and hold .

2 Turn the volume knob to select [

CLOCK

], then press the knob.

3 Turn the volume knob to select [

CLOCKSET

], then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Day Hour Minute

5 Turn the volume knob to select [

24H/ 12H

], then press the knob.

6 Turn the volume knob to select [

12 HOUR

] or [

24 HOUR

], then press the

knob.

7 Press to exit.

To return to the previous setting item, press .

Set the basic settings

1 Press and hold .

2 Turn the volume knob to make a selection (see the following table),

then press the knob.

3 Repeat step 2until the desired item is selected or activated.

4 Press to exit.

To return to the previous setting item, press .

Default:

SETTINGS

BEEP ON

:Activates the keypress tone.;

OFF

:Deactivates.

SRC SELECT

:Enables AM in source selection.;

OFF

:Disables.

PANDORA

:Enables PANDORA in source selection.;

OFF

:Disables.

IHEART

:Enables IHEARTRADIO in source selection.;

OFF

:Disables.

AUX

BTADAPTER

:Selects when the KS-BTA100 Bluetooth adapter is

connected to the AUX jack. (

8

);

:Enables AUX in source selection.;

OFF

:Disables.

F/W UPDATE

SYSTEM

F/W xxxx YES

:Starts upgrading the firmware.;

:Cancels (upgrading is not

activated).

For details on how to update the firmware, see:

<http://www.jvc.net/cs/car/>.

CLOCK

CLOCK SYNC AUTO

:The clock time is automatically set using the Clock Time (CT) data

in FM Radio Broadcast Data System signal.;

OFF

:Cancels.

CLOCK DISP ON

:The clock time is shown on the display even when the unit is turned

off.;

OFF

:Cancels.

* Not displayed when the corresponding source is selected.

JS_JVC_KD_X220_J_EN_2.indd 4 18/9/2014 9:55:04 AM

ENGLISH 5

USB / iPod / ANDROID

To On the faceplate On the remote control

Reverse / Fast-forward*3Press and hold . Press and hold .

Select a file Press .Press .

Select a folder*4Press . Press .

Repeat play*5Press repeatedly.

TRACK RPT

RPT OFF

: JVC Playlist Creator (JPC) / JVC Music

Control (JMC) file (

14

)

TRACK RPT

FOLDER RPT

RPT OFF

: MP3/WMA/WAV/FLAC file

ONE RPT

ALL RPT

RPT OFF

: iPod or ANDROID

Random play*5Press repeatedly.

FOLDERRND

ALL RND

RND OFF

: MP3/WMA/WAV/FLAC file or JPC / JMC

file

SONG RND

ALL RND

RND OFF

: iPod or ANDROID

Do not leave the cable inside the car when not using.

When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install the

application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting.

(

14

)

For ANDROID: Applicable only when [

AUTO MODE

] is selected.

(

6

)

Only for MP3/WMA/WAV/FLAC files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

HEAD MODE

]/ [

AUTO MODE

] is selected.

(

6

)

Start playback

The source changes automatically and

playback starts.

USB input terminal

USB 2.0 cable

(commercially available)

Micro USB 2.0 cable

(commercially available)

(Accessory of the iPod/

iPhone)*

USB

iPod/iPhone

ANDROID*2

JS_JVC_KD_X220_J_EN_2.indd 5 18/9/2014 9:55:05 AM

To On the faceplate

Select control

mode

While in iPod source, press repeatedly.

HEAD MODE

: Control from the unit.

IPHONE MODE

: Control from the iPod/iPhone. However, you

can still play/pause or file skip from the unit.

While in ANDROID source, press

repeatedly.

AUTO MODE

: Control from the unit (using JVC MUSIC

PLAY application).

AUDIO MODE

: Control other media player applications

from the Android device (without using JVC

MUSIC PLAY application). However, you can

still play/pause or file skip from the unit.

Select music

drive

Press repeatedly.

The stored songs in the following start playback.

• Selected internal or external memory of a smartphone

(Mass Storage Class).

• Selected drive of a multiple drives device.

Change the playback speed of the Audiobook

While listening to the iPod and [

HEADMODE

] is selected (

Select control mode

)....

1 Press and hold .

2 Turn the volume knob to select [

IPOD

], then press the knob.

3 Press the volume knob to select [

AUDIOBOOKS

4 Turn the volume knob to make a selection, then press the knob.

0.5×SPEED

1×SPEED

2×SPEED

: Select the desired playback speed of the

Audiobooks sound file in your iPod/iPhone.

(Default: Depends on your iPod/iPhone setting.)

5 Press to exit.

To return to the previous setting item, press .

Select a file from a folder/list

1 Press .

2 Turn the volume knob to select a folder/list, then press the

knob.

3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For MP3/WMA/WAV/FLAC or JPC / JMC file:

Turn the volume knob quickly.

For iPod:

You can search for a file according to the first character.

Press or turn the volume knob quickly to select the

desired character (A to Z/ 0to9/ OTHERS).

• Select “OTHERS” if the first character is other than Ato Z,

0 to 9.

• To return to the previous setting item, press .

• To cancel, press and hold .

• For iPod, applicable only when [

HEADMODE

] is selected. ( 

Select

control mode

)

• For ANDROID, applicable only when [

AUTO MODE

] is selected.

(

Select control mode

)

USB / iPod / ANDROID

JS_JVC_KD_X220_J_EN_2.indd 6 11/9/2014 4:42:37 PM

ENGLISH 7

RADIO

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Search for a station

1 Press repeatedly to select FM or AM.

2 Press (or press on RM-RK52) to search for a station automatically.

(or)

Press and hold (or press and hold on RM-RK52) until “M” flashes,

then press repeatedly to search for a station manually.

Settings in memory

You can store up to 18 stations for FM and 6 stations for AM.

Store a station

While listening to a station....

Press and hold one of the number buttons (1to 6).

(or)

1 Press and hold the volume knob until “PRESETMODE” flashes.

2 Turn the volume knob to select a preset number, then press the knob.

The preset number flashes and “MEMORY” appears.

Select a stored station

Press one of the number buttons (1to6).

(or)

1 Press

2 Turn the volume knob to select a preset number, then press the knob to

confirm.

Other settings

1 Press and hold .

2 Turn the volume knob to select [

TUNER

], then press the

knob.

3 Turn the volume knob to make a selection

(

see the

following table

)

, then press the knob.

4 Repeat step 3until the desired item is selected/

activated or follow the instructions stated on the

selected item.

5 Press to exit.

To return to the previous setting item, press .

Default:

RADIO TIMER

Turns on the radio at a specific time regardless of the

current source.

ONCE

DAILY

WEEKLY

OFF

:Select how often the

timer will be turned on.

:Select the source.

(for FM)/

(for AM):Select the preset

station.

Set the activation day*

and time.

“

” lights up when complete.

Radio Timer will not activate for the following cases.

• The unit is turned off.

• [

OFF

] is selected for [

] in [

SRCSELECT

]

after Radio

Timer for AM is selected. (

4

)

Selectable only when [

ONCE

] or [

WEEKLY

] is selected in step

JS_JVC_KD_X220_J_EN_2.indd 7 18/9/2014 9:55:12 AM

RADIO

Use a portable audio player

1 Connect a portable audio player (commercially available).

2 Select [

] for [

AUX

] in [

SRC SELECT

]. (

4

)

3 Press repeatedly to select AUX.

4 Turn on the portable audio player and start playback.

Use a 3-core plug head stereo mini plug for optimum audio

output.

Use a Bluetooth® device

1 Connect the Bluetooth adapter, KS-BTA100 (separately purchased).

2 Register (pair) the Bluetooth device with KS-BTA100.

3 Select [

BT ADAPTER

] for [

AUX

] in [

SRC SELECT

]. (

4

4 Press repeatedly to select BT AUDIO.

5 Start using the Bluetooth device.

For details, refer to the instruction manual of KS-BTA100.

3.5mm (1/8") stereo mini plug with “L” shaped connector

(commercially available)

Portable audio player

Auxiliary input jack

AUX

Auxiliary input jack

Blue/white Blue/white: Remote

Black Black: Ground

Brown Brown: Tel muting

Wiring harness of the unit

(

19

)

Default:

SSM SSM01–06

SSM07–12

SSM13–18

:Automatically presets up

to 18 stations for FM. “SSM” stops flashing when the first 6 stations are

stored. Select

SSM07–12

SSM13–18

to store the following 12

stations.

IF BAND AUTO

:Increases the tuner selectivity to reduce interference noises from

adjacent FM stations. (Stereo effect may be lost.);

WIDE

:Subjects to

interference noises from adjacent FM stations, but sound quality will not

be degraded and the stereo effect will remain.

MONO ON

:Improves the FM reception, but the stereo effect will be lost.;

OFF

:Cancels.

AREA AREAUS

: For North/Central/South America, AM/FM intervals:

10kHz/200kHz.;

AREASA

:For some South American countries, AM/

FM intervals: 10kHz/50kHz.;

AREAEU

:For any other areas, AM/FM

intervals: 9kHz/50kHz.

PTY SEARCH

Select a PTY code (see below).

If there is a station broadcasting a program of the same PTY code as you

have selected, that station is tuned in.

PTY code

NEWS

INFORM

(information),

SPORTS

TALK

ROCK

CLSROCK

(classic

rock),

ADLTHIT

(adult hits),

SOFTRCK

(softrock),

TOP40

COUNTRY

OLDIES

SOFT

NOSTALGA

(nostalgia),

JAZZ

CLASSICL

(classical),

R&B

(rhythm and blues),

SOFTR&B

(soft rhythm and blues),

LANGUAGE

RELMUSC

(religious music),

RELTALK

(religious talk),

PERSNLTY

(personality),

PUBLIC

COLLEGE

HABLESP

(Spanish talk),

MUSCESP

(Spanish music),

HIPHOP

WEATHER

Only for FM source.

JS_JVC_KD_X220_J_EN_2.indd 8 11/9/2014 4:42:39 PM

ENGLISH 9

Pandora®

Preparation:

Install the latest version of the Pandora application on your device

(iPhone/ iPod touch), then create an account and log in to Pandora.

• Select [

] for [

PANDORA

] in [

SRC SELECT

]. (

4

)

Start listening

1 Open the Pandora application on your device.

2 Connect your device to the USB input terminal.

The source changes to PANDORA and broadcast starts.

To On the faceplate On the remote control

Playback / pause Press the volume knob. Press .

Skip a track Press T. Press I.

Thumbs up or

thumbs down*2

Press . Press .

Do not leave the cable inside the car when not using.

If thumbs down is selected, the current track is skipped.

Create and save a new station

1 Press .

2 Turn the volume knob to select [

NEW STATION

], then press the knob.

3 Turn the volume knob to select [

FROM TRACK

] or [

FROM ARTIST

], then

press the knob.

A new station is created based on the current song or artist.

4 Press and hold number button 1, 4, 5or 6to store.

To select a stored station, press number button 1, 4, 5or 6.

Search for a registered station

1 Press .

2 Turn the volume knob to make a selection, then press the knob.

[

BYDATE

According to the registered date.

[

A-Z

Alphabetical order.

3 Turn the volume knob to the desired station, then press the knob.

To cancel, press and hold .

Bookmark a song or artist information

1 Press and hold the volume knob.

2 Turn the volume knob to make a selection, then press the knob.

[

THIS TRACK

]: Current song information

[

THIS ARTIST

]: Current artist information

“BOOKMARKED” appears and the information is stored to your device.

The bookmark is available on your Pandora account but not on this

unit.

USB input terminal

(Accessory of the iPod/iPhone)

JS_JVC_KD_X220_J_EN_2.indd 9 11/9/2014 4:42:39 PM

iHeartRadio®

Preparation:

Install the latest version of iHeart Link for JVC application on your device (iPhone/ iPod

touch), then create an account and log in to iHeartRadio.

• Select [

] for [

IHEART

] in [

SRC SELECT

]. (

4

)

Start listening

1 Open the iHeart Link application on your device.

2 Connect your device to the USB input terminal.

3 Press repeatedly to select IHEARTRADIO.

Broadcast starts automatically

To On the faceplate On the remote control

Playback / pause Press the volume knob. Press .

Skip a track for custom station Press T. Press I.

Thumbs up or thumbs down

for custom station*2

Press . Press .

Create a new/custom station Press and hold the volume

knob.

—

Add to favorite stations for live

station

Press 1.—

Scan for live station Press 4.—

Do not leave the cable inside the car when not using.

If thumbs down is selected, the current track is skipped.

Search for a station

1 Press .

2 Turn the volume knob to select a category, then

press the knob.

3 Turn the volume knob to the desired station, then

press the knob.

When a city list appears, you can skip cities in

alphabetical order.

To cancel, press and hold .

Skip cities by alphabetical order

While a city list appears during search...

1 Turn the volume knob quickly to enter character

search.

You can search through the list quickly according to

the first character (A to Z).

2 Turn the volume knob or press to select the

character to be search for.

3 Press the volume knob to start searching.

To cancel, press and hold .

USB input terminal

(Accessory of the iPod/iPhone)

JS_JVC_KD_X220_J_EN_2.indd 10 11/9/2014 4:42:39 PM

Andere Handbücher für KD-X220

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung