JVC KD-X330BT Bedienungsanleitung

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ENGLISH

ไทย

B5A-0823-00 [M]

KD-X330BT

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

ตัวรับสื่อดิจิตอล

คู่มือการใช้งาน

JS_JVC_KD_X330BT_M_C.indd 1JS_JVC_KD_X330BT_M_C.indd 1 5/10/2015 12:18:16 PM5/10/2015 12:18:16 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CONTENTS BEFORE USE

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important

that you read and observe Warning and Caution in this manual.

• Please keep the manual in a safe and accessible place for future reference.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of

the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded

data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short

circuit.

Remote control (RM-RK52):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or

equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used

batteries promptly. If swallowed, contact a physician immediately.

BEFORE USE 2

BASICS 3

GETTING STARTED 4

Cancel the demonstration

2 Set the clock

3 Set the basic settings

USB / iPod / ANDROID 5

RADIO 6

Pandora®

(Applicable for Australia or

New Zealand models only)

BLUETOOTH® 9

AUX 15

AUDIO SETTINGS 15

DISPLAY SETTINGS 19

REFERENCES 20

Maintenance

More information

TROUBLESHOOTING 21

SPECIFICATIONS 24

INSTALLATION /

CONNECTION 25

How to read this manual

• Operations are explained mainly using buttons on the faceplate of

KD-X330BT

• English indications are used for the purpose of explanation. You can select the display language from the

menu. (

)

•

[XX]

indicates the selected items.

• (

) indicates references are available on the stated page.

JS_JVC_KD_X330BT_M_EN_1.indd 2JS_JVC_KD_X330BT_M_EN_1.indd 2 5/10/2015 12:31:06 PM5/10/2015 12:31:06 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ENGLISH

BASICS

Attach

How to reset

Detach

T I

Volume knob

Detach button

Display window

Remote control (RM-RK52)

How to replace the battery

Pull out the insulation sheet

when using for the first time.

Remote sensor (Do not expose

to bright sunlight.)

To On the faceplate On the remote control

Turn on the power Press .

• Press and hold to turn off the power. ( Not available )

Adjust the volume Turn the volume knob. Press or .

Press the volume knob to mute the sound or pause playback.

• Press again to cancel. Press to mute the sound or pause playback.

• Press again to cancel.

Select a source • Press repeatedly.

• Press , then turn the volume knob within 2 seconds.

Press SOURCE repeatedly.

Change the display

information

Press repeatedly.

( 21)

( Not available )

Faceplate

Press the switch twice

within 5 seconds after

detaching the faceplate.

JS_JVC_KD_X330BT_M_EN_2.indd 3JS_JVC_KD_X330BT_M_EN_2.indd 3 13/10/2015 2:47:17 PM13/10/2015 2:47:17 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

Cancel the demonstration

When you turn on the power for the first time (or [

FACTORY RST

]

is set to [

YES

]), the display shows: “CANCEL DEMO” “PRESS”

“VOLUME KNOB”

1 Press the volume knob.

[

YES

] is selected for the initial setup.

2 Press the volume knob again.

“DEMO OFF” appears.

Set the clock

1 Press and hold .

2 Turn the volume knob to select [

CLOCK

], then press the

knob.

3 Turn the volume knob to select [

CLOCK SET

], then press the

knob.

4 Turn the volume knob to make the settings, then press

the knob.

Day Hour Minute

5 Turn the volume knob to select [

24H/ 12H

], then press the

knob.

6 Turn the volume knob to select [

12 HOUR

] or [

24 HOUR

then press the knob.

7 Press to exit.

To return to the previous setting item, press .

Set the basic settings

1 Press and hold .

2 Turn the volume knob to select an item (see the following table), then press

the knob.

3 Repeat step 2until the desired item is selected or activated.

4 Press to exit.

To return to the previous setting item, press .

Default:

SETTINGS

BEEP

(Not applicable when 3-way crossover is selected.)

:Activates the keypress tone.;

OFF

:Deactivates.

SRC SELECT

:Enables AM in source selection.;

OFF

:Disables.

SW1

:Enables SW1 in source selection.;

OFF

:Disables.

SW2

:Enables SW2 in source selection.;

OFF

:Disables.

PANDORA

:Enables PANDORA in source selection.;

OFF

:Disables.

AUX

:Enables AUX in source selection.;

OFF

:Disables.

F/W UPDATE

SYSTEM

F/W xxxx YES

:Starts upgrading the firmware.;

:Cancels (upgrading is not activated).

For details on how to update the firmware, see: <http://www.jvc.net/cs/car/>.

FACTORY RST YES

:Resets the settings to default (except the stored station).;

:Cancels.

CLOCK

CLOCK SYNC AUTO

:The clock time is automatically set using the Clock Time (CT) data in FM Radio Data

System signal.;

OFF

:Cancels.

CLOCK DISP ON

:The clock time is shown on the display even when the unit is turned off.;

OFF

:Cancels.

ENGLISH

Select the display language for menu and music information if applicable.

By default,

ENGLISH

is selected.

ESPANOL

* Not displayed when the corresponding source is selected.

JS_JVC_KD_X330BT_M_EN_1.indd 4JS_JVC_KD_X330BT_M_EN_1.indd 4 5/10/2015 12:31:07 PM5/10/2015 12:31:07 PM

ENGLISH 5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

USB / iPod / ANDROID

To On the faceplate On the remote control

Reverse / Fast-forward*3Press and hold . Press and hold .

Select a file Press .Press .

Select a folder*4Press . Press .

Repeat play*5Press repeatedly.

TRACK RPT

FOLDER RPT

ALL RPT

: MP3/WMA/AAC/WAV/FLAC file

ONE RPT

ALL RPT

RPT OFF

: iPod or ANDROID

Random play*5Press repeatedly.

FOLDERRND

ALL RND

RND OFF

: MP3/WMA/AAC/WAV/FLAC file

SONG RND

ALL RND

RND OFF

: iPod or ANDROID

Do not leave the cable inside the car when not using.

When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install the

application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting.

(

20

)

For ANDROID: Applicable only when [

AUTO MODE

] is selected.

(

6

)

Only for MP3/WMA/AAC/WAV/FLAC files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

HEAD MODE

]/ [

AUTO MODE

] is selected.

(

6

)

Select music drive

Press repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

Start playback

The source changes automatically and

playback starts.

USB input terminal

USB 2.0 cable

(commercially available)

Micro USB 2.0 cable

(commercially available)

(Accessory of the

iPod/iPhone)*

USB

iPod/iPhone

ANDROID*2

JS_JVC_KD_X330BT_M_EN_2.indd 5JS_JVC_KD_X330BT_M_EN_2.indd 5 13/10/2015 2:56:26 PM13/10/2015 2:56:26 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Select control mode

While in USB-IPOD source, press repeatedly.

HEAD MODE

: Control iPod from this unit.

IPHONE MODE

: Control iPod using the iPod itself. However, you can still play/

pause or file skip from this unit.

While in ANDROID source, press repeatedly.

AUTO MODE

: Control Android device from this unit via JVC MUSIC PLAY

application installed in the Android device.

AUDIO MODE

: Control Android device using the Android device itself via

other media player applications installed in the Android device.

However, you can still play/pause or file skip from this unit.

Select a file from a folder/list

1 Press .

2 Turn the volume knob to select a folder/list, then press the knob.

3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

– Not applicable for iPod.

Alphabet search

(applicable only for iPod):

You can search for a file according to the first character.

Press or turn the volume knob quickly to select the desired

character (A to Z/ 0to9/ OTHERS).

– Select “OTHERS” if the first character is other than Ato Z, 0 to 9.

• To return to the previous setting item, press .

• To cancel, press and hold .

• For iPod, applicable only when [

HEADMODE

] is selected.

• For ANDROID, applicable only when [

AUTO MODE

] is selected.

USB / iPod / ANDROID RADIO

“ST” lights up when receiving an FM stereo broadcast with sufficient

signal strength.

Search for a station

1 Press repeatedly to select FM, AM, SW1 or SW2.

2 Press (or press on RM-RK52) to search for a

station automatically.

(or)

Press and hold (or press and hold on RM-RK52)

until “M” flashes, then press repeatedly to search for a station

manually.

Settings in memory

You can store up to 18 stations for FM and 6 stations for AM/SW1/

SW2.

Store a station

While listening to a station....

Press and hold one of the number buttons (1to 6).

(or)

1 Press and hold the volume knob until “PRESETMODE” flashes.

2 Turn the volume knob to select a preset number, then press the

knob.

The preset number flashes and “MEMORY” appears.

JS_JVC_KD_X330BT_M_EN_2.indd 6JS_JVC_KD_X330BT_M_EN_2.indd 6 13/10/2015 2:56:26 PM13/10/2015 2:56:26 PM

ENGLISH 7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

RADIO

Select a stored station

Press one of the number buttons (1to6).

(or)

1 Press .

2 Turn the volume knob to select a preset number, then press the

knob to confirm.

Other settings

1 Press and hold .

2 Turn the volume knob to select [

TUNER

], then press the knob.

3 Turn the volume knob to select an item

(

see the following table

)

then press the knob.

4 Repeat step 3until the desired item is selected/activated or follow

the instructions stated on the selected item.

5 Press to exit.

To return to the previous setting item, press .

Default:

RADIO TIMER

Turns on the radio at a specific time regardless of the current source.

ONCE

DAILY

WEEKLY

OFF

:Select how often the timer will be turned

on.

SW1

SW2

:Select the FM, AM, SW1 or SW2 band.

(for FM)/

(for AM/SW1/SW2):Select the preset

station.

Set the activation day*

and time.

“

” lights up when complete.

Radio Timer will not activate for the following cases.

• The unit is turned off.

• [

OFF

] is selected for [

AM/SW1/SW2

] in [

SRC SELECT

] after Radio Timer

for AM/SW1/SW2 is selected. (

)

SSM SSM 01 – 06

SSM 07 – 12

SSM 13 – 18

: Automatically presets up to

18 stations for FM. “SSM” stops flashing when the first 6 stations are stored.

Select

SSM 07 – 12

SSM 13 – 18

to store the following 12 stations.

LOCAL SEEK ON

:Searches only AM/SW1/SW2 stations with good reception.;

OFF

:Cancels.

• Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

IF BAND AUTO

:Increases the tuner selectivity to reduce interference noises from

adjacent FM stations. (Stereo effect may be lost.);

WIDE

:Subjects to

interference noises from adjacent FM stations, but sound quality will not

be degraded and the stereo effect will remain.

MONO ON

:Improves the FM reception, but the stereo effect will be lost.;

OFF

:Cancels.

NEWS-STBY

:The unit will temporarily switch to News Programme if available.;

OFF

:Cancels.

REGIONAL

: Switches to another station only in the specific region using the “AF”

control.;

OFF

:Cancels.

AF SET

: Automatically searches for another station broadcasting the same

program in the same Radio Data System network with better reception

when the current reception is poor.;

OFF

: Cancels.

TI SET

: Allows the unit to temporarily switch to Traffic Information if

available (“TI” lights up). ;

OFF

:Cancels.

PTY SEARCH

Select a PTY code (see below).

If there is a station broadcasting a program of the same PTY code as you

have selected, that station is tuned in.

PTY code

NEWS

AFFAIRS

INFO

SPORT

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

POP M

(music),

ROCK M

(music),

EASY M

(music),

LIGHT M

(music),

CLASSICS

OTHER M

(music),

WEATHER

FINANCE

CHILDREN

SOCIAL

RELIGION

PHONE IN

TRAVEL

LEISURE

JAZZ

COUNTRY

NATION M

(music),

OLDIES

FOLK M

(music),

DOCUMENT

Selectable only when [

ONCE

] or [

WEEKLY

] is selected in step

Only for FM source.

JS_JVC_KD_X330BT_M_EN_1.indd 7JS_JVC_KD_X330BT_M_EN_1.indd 7 5/10/2015 12:31:09 PM5/10/2015 12:31:09 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Pandora®

(Applicable for Australia or New Zealand models only)

Preparation:

Install the latest version of the Pandora application on your device

(iPhone/ iPod touch), then create an account and log in to Pandora.

• Select [

] for [

PANDORA

] in [

SRC SELECT

( 4)

Start listening

1 Open the Pandora application on your device.

2 Connect your device to the USB input terminal.

3 Press repeatedly to select PANDORA.

Broadcast starts automatically

To On the faceplate On the remote control

Playback / pause Press the volume knob. Press .

Skip a track Press T. Press I.

Thumbs up or

thumbs down*2

Press . Press .

Do not leave the cable inside the car when not using.

If thumbs down is selected, the current track is skipped.

Create and save a new station

1 Press .

2 Turn the volume knob to select [

NEW STATION

], then press the knob.

3 Turn the volume knob to select [

FROM TRACK

] or [

FROM ARTIST

], then

press the knob.

A new station is created based on the current song or artist.

4 Press and hold number button 3, 4, 5or 6to store.

To select a stored station, press number button 3, 4, 5or 6.

Search for a registered station

1 Press .

2 Turn the volume knob to select an item, then press the knob.

[

BY DATE

According to the registered date.

[

A-Z

Alphabetical order.

3 Turn the volume knob to select the desired station, then press the

knob.

To cancel, press and hold .

Bookmark current song information

Press and hold the volume knob.

“BOOKMARKED” appears and the information is stored to your device.

The bookmark is available on your Pandora account but not on this unit.

USB input terminal

(Accessory of the iPod/iPhone)

JS_JVC_KD_X330BT_M_EN_1.indd 8JS_JVC_KD_X330BT_M_EN_1.indd 8 5/10/2015 12:31:09 PM5/10/2015 12:31:09 PM

ENGLISH 9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Pair and connect a Bluetooth device for the first time

1 Press to turn on the unit.

2 Search and select “JVC UNIT” on the Bluetooth device.

“BTPAIRING” flashes on the display.

• For some Bluetooth devices, you may need to enter the Personal Identification Number

(PIN) code immediately after searching.

3 Perform (A) or (B) depending on what scrolls on the display.

For some Bluetooth devices, pairing sequence may vary from the steps described below.

(A) “[Device Name]” “XXXXXX” “VOL–YES” “BACK–NO”

“XXXXXX” is a 6-digit passkey randomly generated during each pairing.

Ensure that the passkey which appears on the unit and Bluetooth device is the same.

Press the volume knob to confirm the passkey.

Operate the Bluetooth device to confirm the passkey.

(B) “[Device Name]” “VOL–YES” “BACK–NO”

Press the volume knob to start pairing.

• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the

Bluetooth device.

You can change to a desired PIN code before pairing. (

)

• If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.

“PAIRING COMPLETED” appears when pairing is completed and “ ” will light up when the

Bluetooth connection is established.

• This unit supports Secure Simple Pairing (SSP).

• Up to 10 devices can be registered (paired) in total.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if

you reset the unit. To delete the paired device,

, [

DELETE PAIR

• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at

any time.

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the

device to the unit manually.

• Refer to the instruction manual of the Bluetooth device for more information.

BLUETOOTH — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP)

– Advanced Audio Distribution Profile (A2DP)

– Audio/Video Remote Control Profile (AVRCP)

– Serial Port Profile (SPP)

– Phonebook Access Profile (PBAP)

Supported Bluetooth codecs

– Sub Band Codec (SBC)

– Advanced Audio Coding (AAC)

Connect the microphone

Adjust the microphone

angle

Secure using cord clamps

(not supplied) if necessary.

Microphone input jack

Microphone

(supplied)

Rear panel

Lights up to show the battery strength and signal strength.

* Functionality depends on the type of the phone used.

JS_JVC_KD_X330BT_M_EN_1.indd 9JS_JVC_KD_X330BT_M_EN_1.indd 9 5/10/2015 12:31:09 PM5/10/2015 12:31:09 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Auto Pairing

When you connect the iPhone/ iPod touch/

Android device to the USB input terminal,

pairing request (via Bluetooth) is automatically

activated.

Press the volume knob to pair once you have

confirmed the device name.

Automatic pairing request is activated only if:

– Bluetooth function of the connected devcie is

turned on.

– [

AUTO CNNCT

] is set to [

]. (

)

– JVC MUSIC PLAY application is installed on

the Android device (

) and [

AUTO MODE

] is

selected (

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:

• The buttons will blink in the blinking pattern you have selected in [

RING ILLUMI

]. ( 

)

• The unit answers the call automatically if [

AUTO ANSWER

] is set to a selected time. ( 

)

During a call:

• The buttons stop blinking.

• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.

To On the faceplate On the remote control

First incoming call...

Answer a call Press or the volume knob. Press .

Reject a call Press and hold or the

volume knob.

Press and hold .

End a call Press and hold or the

volume knob.

Press and hold .

JS_JVC_KD_X330BT_M_EN_2.indd 10JS_JVC_KD_X330BT_M_EN_2.indd 10 13/10/2015 3:00:23 PM13/10/2015 3:00:23 PM

Andere Handbücher für KD-X330BT

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung