JVC KD-X40 Bedienungsanleitung

DIGITAL MEDIA RECEIVER /

RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE

For canceling the display demonstration, see page 3. /

Pour annuler la démonstration des affichages, référez-vous à la page 3.

ENGLISH

FRANÇAIS

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

ʷʾʿʺƖʷʷʺ

ƾƭƿ

KD-X40/KD-X30

For installation and connections, refer to the separate manual.

Pour l’installation et les raccordements, se référer au manuel séparé.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

Battery

Products

Information for Users on Disposal

of Old Equipment and Batteries

[European Union only]

These symbols indicate that the product

and the battery with this symbol should

not be disposed as general household

waste at its end-of-life.

If you wish to dispose of this product and

the battery, please do so in accordance

with applicable national legislation or other

rules in your country and municipality.

By disposing of this product correctly, you

will help to conserve natural resources and

will help prevent potential negative effects

on the environment and human health.

Notice:

The sign Pb below the symbol for batteries

indicates that this battery contains lead.

How to reset your unit

Your preset adjustments will

also be erased.

Maintenance

Cleaning the unit

Wipe off the dirt on the panel with a dry silicon or

soft cloth. Failure to observe this precaution may

result in damage to the unit.

Warning:

Stop the car before operating the unit.

Caution:

Adjust the volume so that you can hear sounds

outside the car. Driving with the volume too high

may cause an accident.

Avoid using the USB device or iPod/iPhone if it

might hinder driving safety.

Caution on volume setting:

Digital devices (USB) produce very little noise

compared with other sources. Lower the volume

before playing these digital sources to avoid

damaging the speakers by the sudden increase of

the output level.

Temperature inside the car:

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

How to read this manual:

This manual mainly explains operations using

the buttons on the control panel.

< > indicates the displays on the control

panel.

[XX] indicates the initial setting of a menu

item.

2|ޓENGLISH

2011/11/8ޓ22:24:41KD-X40_E_EN

Contents

Preparation ............................................................ 3

Canceling the display demonstration

Setting the clock

Basic operations ................................................... 4

Remote controller

.................................................. 5

Radio ........................................................................ 6

USB ............................................................................ 8

iPod/iPhone

(KD-X40 only)

.................................. 9

External components ...................................... 10

Bluetooth姞

............................................................ 10

Illumination color adjustments

(KD-X40 only)

......................................................... 11

Brightness adjustments .................................. 12

Sound adjustments .......................................... 12

Menu operations ............................................... 13

Additional information ................................... 16

Troubleshooting ................................................ 18

Specifications ..................................................... 19

Preparation

Canceling the display

demonstration

The display demonstration is always turned on

unless you cancel it.

(Hold)

(Initial setting)

3Select <DEMO OFF>.

4Press MENU to exit.

Setting the clock

(Hold)

2Select <CLOCK>.

3Select <CLOCK SET>.

(Initial setting)

4Adjust the hour.

5Adjust the minute.

6Select <24H/12H>.

7Select <24 HOUR> or <12 HOUR>.

8Press MENU to exit.

ENGLISHޓ|3

2011/11/8ޓ22:24:41KD-X40_E_EN

Remote controller

USB input terminal

Front AUX input jack

DO NOT expose to bright sunlight.

Remote sensor

Display window

Control dial

Control panel

(For KD-X40 only)

Aim the remote controller directly at the sensor.

When you press or hold the following button(s)...

Control panel Remote

controller General function

/SOURCE —

Turns on.

Turns off. (Hold)

Press the /SOURCE button on the control panel and turn

the control dial within 2 seconds to select the source.

SOURCE Press repeatedly to select the source.

Control dial

(turn)

VOL - / + Adjusts the volume level.

— Selects items.

Control dial

(press)

)

Mutes the sound or pauses playback.

Press the button again to cancel muting or resume

playback.

— Confirms selection.

—Enters <BRIGHTNESS>menu directly. (KD-X30 only)

('page 12)

iPod —

Switches to iPod source. (KD-X40 only)

Switches the iPod mode when in the iPod source. (KD-X40

only) ('page 9)

EQ SOUND Selects the preset sound mode. ('page 12)

—

Activates/deactivates TA Standby Reception. ('page 7)

Enters PTY Search mode. (Hold) ('page 7)

Returns to the previous menu.

Exits from the menu. (Hold)

/ / Selects a preset station. ('page 6)

Selects MP3/WMA folder. ('page 8)

/ / 

Searches for a station automatically. ('page 6)

Searches for a station manually. (Hold)

Selects track. ('page 8, 9)

Fast-forwards or reverses track. (Hold)

KD-X30 can be remotely controlled as instructed here (with an optionally purchased remote

controller). We recommend that you use remote controller RM-RK52 with your unit.

Basic operations

4|ޓENGLISH

2011/11/8ޓ22:24:41KD-X40_E_EN

Display information

Changes the display information. (Press)

Scrolls the current display information. (Hold)

Source Display

Radio Non-Radio Data System station: Frequency )Clock

FM Radio Data System station: Station name (PS) -Frequency -

Programme type (PTY) -Clock -(back to the beginning)

USB Album title/Artist -Track title -Track no./Playing time -Track no./

Clock -(back to the beginning)

iPod/iPhone (HEAD MODE/

IPOD MODE) *1

iPod/iPhone (EXT MODE) *1 EXT MODE)Clock

External Components (AUX) F-AUX or R-AUX)Clock

Bluetooth Audio BT AUDIO)Clock

*1 For KD-X40 only.

Remote controller

Preparing

When you use the remote controller for the first

time, pull out the insulation sheet.

Insulation sheet

Replacing the lithium coin

battery

If the effectiveness of the remote controller

decreases, replace the battery.

CR2025

Caution:

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

Battery shall not be exposed to excessive heat

such as sunshine, fire, or the like.

Warning:

Do not install any battery other than CR2025 or

its equivalent.

Do not leave the remote controller in places

(such as dashboards) exposed to direct

sunlight for a long time.

Store the battery in places out of reach of

children.

Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

Do not place the battery with other metallic

materials.

Do not poke the battery with tweezers or

similar tools.

Insulate the battery by wrapping it with tape

when disposing or storing it.

This unit is equipped with the steering wheel

remote control function. For details, refer also to

the instructions supplied with the remote

adapter.

Basic operations

ENGLISHޓ|5

2011/11/8ޓ22:24:41KD-X40_E_EN

Searching for a station

Select <FM> or <AM>.

Auto search. (Press)

Manual search. (Hold)

“M”flashes, then press the button repeatedly.

“ST”lights up when receiving an FM stereo broadcast with sufficient signal strength.

Storing stations in memory

Manual presetting

You can preset up to 18 stations for FM and 6

stations for AM.

While listening to a station...

(Hold)

“PRESET MODE”flashes.

The preset number flashes and “MEMORY”

appears.

2Select preset number.

Auto presetting (FM only)

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

(Hold)

-<TUNER>

-<SSM>

-<SSM 01 – 06>

“SSM”flashes. When all the stations are stored,

“SSM”stops flashing.

To preset <SSM 07 – 12>/<SSM 13 – 18>,

repeat steps 1 and 2.

Selecting a preset station

You can also select a preset station using / .

Setting the Radio Timer

You can tune in to a preset station at a specific

time regardless of the current source.

(Hold)

-<TUNER>

-<RADIO TIMER>

-<OFF>/<ONCE>/

<DAILY>

[OFF] Cancels Radio Timer.

ONCE Activates once.

DAILY Activates daily.

-<FM>/<AM>

-<01>... <18>for FM/

<01>... <06>for AM

3Select the preset station.

4Set the activation time.

5Press MENU to exit.

lights up after the Radio Timer has been set.

Only one timer can be set. Setting a new timer

will override the previous setting.

The Radio Timer will not activate if the unit is

turned off or if <AM>is set to <OFF>after

selecting an AM station for the timer.

Radio

6|ޓENGLISH

2011/11/8ޓ22:24:41KD-X40_E_EN

The following features are available only

for FM Radio Data System stations.

Searching for your favorite

Programmes—Programme

Type (PTY) Search

(Hold)

PTY Search starts.

If there is a station broadcasting a programme of the

same PTY code as you have selected, that station is

tuned in.

2Select a PTY code.

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M

(music), LIGHT M (music), CLASSICS, OTHER M (music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION,

PHONEIN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M

(music), OLDIES, FOLK M (music), DOCUMENT

Activating TA/News Standby

Reception

Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) or

NEWS programme from any source other than

AM.

TA Standby Reception

TP indicator TA Standby Reception

Lights up

The unit will temporarily switch

to Traffic Announcement (TA) if

available.

Flashes

Not yet activated. Tune in to

another station providing the

Radio Data System signals.

To deactivate, press again.

NEWS Standby Reception

(Hold)

-<TUNER>

-<NEWS-STBY>

-<NEWS ON>

The unit will temporarily switch to News

Programme if available.

If the volume is adjusted during reception of

Traffic Announcement or News, the adjusted

volume is automatically memorized. It will be

applied the next time the unit switches to

Traffic Announcement or News.

Tracking the same programme

—Network-Tracking Reception

When driving in an area where FM reception is

not sufficient enough, this unit automatically

tunes in to another FM Radio Data System station

of the same network, possibly broadcasting the

same programme with stronger signals.

(Hold)

-<TUNER>

-<AF-REG>*

[AF ON]

Switches to another station.

The programme may differ

from the one currently received

(the AF indicator lights up).

AF-REG ON

Switches to another station

broadcasting the same

programme (the AF indicator

lights up).

OFF

Cancels.

* AF-REG: Alternative Frequencies-Regional

Automatic station selection—

Programme Search

When the signal of a preset station you have

selected is weak, this unit searches for another

station possibly broadcasting the same

programme as the original preset station is

broadcasting.

<P-SEARCH>('page 15)

Radio

ENGLISHޓ|7

2011/11/8ޓ22:24:41KD-X40_E_EN

Playing a USB device

USB 2.0 cable (not supplied)

USB input terminal

The source changes to “USB”and playback starts.

This unit can play MP3/WMA files stored in USB mass storage device (such as a USB memory and

Digital Audio Player).

Make sure all important data has been backed up. We shall bear no responsibility for any loss of data

in USB mass storage class device while using this system.

Selecting a folder/track

Selects folder.

Selects track. (Press)

Fast-forwards or reverses

the track. (Hold)

Selecting a track/folder from

the list

2Select a folder.

If the USB device contains many folders or

tracks, you can fast search for desired folder or

track by turning the control dial quickly.

3Select a track.

Selecting the playback modes

You can select one of the following playback

modes at a time.

(Hold)

#<REPEAT>)<RANDOM>

REPEAT 

RPT OFF Cancels repeat playback.

TRACK RPT Repeats current track.

FOLDER RPT Repeats current folder.

RANDOM 

RND OFF Cancels random playback.

FOLDER RND

Randomly plays all tracks of

current folder, then tracks of

next folders.

ALL RND Randomly plays all tracks.

USB

8|ޓENGLISH

2011/11/8ޓ22:24:41KD-X40_E_EN

iPod/iPhone

KD-X40 only

Playing an iPod/iPhone

USB 2.0 cable (accessory of the iPod/iPhone)

USB input terminal

The source changes to “USB”-“USB-IPOD”and playback starts.

Selecting the control mode

#<HEAD MODE>/<IPOD MODE>/

HEAD

MODE Controls iPod playback through this

unit.

IPOD

MODE Controls iPod playback from the

iPod/iPhone.

EXT

MODE Allows any audio signals from iPod/

iPhone.

You can also change the setting using <IPOD

SWITCH>in the menu. ('page 15)

Selecting a track

Applicable under <HEAD MODE/IPOD MODE>

only.

Selects track/chapter.

(Press)

Fast-forwards or reverses

the track. (Hold)

Selecting a track from the list

Applicable under <HEAD MODE>only.

PLAYLISTS)ARTISTS)ALBUMS)SONGS)

PODCASTS)GENRES)COMPOSERS)(back to

the beginning)

2Select the desired list.

Repeat this step until the desired track is selected.

If the selected menu contains many tracks, you

can fast search for the desired track by turning

the control dial quickly.

3Select the desired track.

Selecting the playback modes

Applicable under <HEAD MODE>only.

You can select one of the following playback

modes at a time.

(Hold)

#<REPEAT>)<RANDOM>

REPEAT 

ONE RPT Functions the same as “Repeat

One”of the iPod.

ALL RPT Functions the same as “Repeat

All”of the iPod.

RANDOM 

RND OFF Cancels random playback.

SONG RND Functions the same as “Shuffle

Songs”of the iPod.

ALBUM RND Functions the same as “Shuffle

Albums”of the iPod.

“ALBUM RND”is not applicable for some iPod/

iPhone.

ENGLISHޓ|9

2011/11/8ޓ22:24:41KD-X40_E_EN

For details, refer also to the instructions supplied with the external components.

Playing an external component from Front/Rear AUX

Portable audio

player, etc.

3.5 mm stereo mini plug

(not supplied)

3.5 mm stereo mini plug

(with “L” shaped connector)

(not supplied)

1Connect to F-AUX on the control panel

and/or R-AUX on the rear panel.

(Hold)

-<SRC SELECT>

-<F-AUX>/<R-AUX>

-<F-AUX ON>or

<R-AUX ON>

Press MENU to exit.





2Set the source as necessary.

3Select <F-AUX> or <R-AUX>.

4Turn on the connected component and

start playing the source.

Use a 3-terminal plug head stereo mini plug for optimum audio output. Otherwise, sound

may be interrupted or unclear while listening to an external component.

Bluetooth

姞

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100

(separately purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of

the unit. ('Installation/Connection Manual)

KS-BTA100 is not available in some countries. Please contact your dealer where you

purchased this unit.

Operations may be different depending on the connected Bluetooth device. For

details, refer also to the instructions supplied with the device.

Preparation

For details on registering and using the Bluetooth device, refer to the instructions manual supplied with

KS-BTA100.

1Register (pair) a Bluetooth device with KS-BTA100.

-<SRC SELECT>

-<R-AUX>

-<BT ADAPTER>

2Change the <SRC SELECT> settings of this unit.

(Hold)

3Press MENU to exit.

KS-BTA100

External components

10 |ޓENGLISH

2011/11/8ޓ22:24:41KD-X40_E_EN

Andere Handbücher für KD-X40

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

JVC

JVC KD-G821 Bedienungsanleitung

JVC

JVC KS-T807 Bedienungsanleitung

JVC

JVC KD-R901 Bedienungsanleitung

JVC

JVC KD-R330 Bedienungsanleitung

JVC

JVC GET0087-001A Bedienungsanleitung

JVC

JVC KW-R400 Bedienungsanleitung

JVC

JVC KD-S13 Bedienungsanleitung

JVC

JVC KD-R200 Leitfaden

JVC

JVC KD-SR82BT Bedienungsanleitung

JVC

JVC KD-X161 Bedienungsanleitung

JVC

JVC KD-G120 - Radio / CD Player Administratorhandbuch

JVC

JVC KD-G501EE Bedienungsanleitung

JVC

JVC KDBT1 - Radio / CD Leitfaden

JVC

JVC EXAD KD-SHX851 Leitfaden

JVC

JVC KD-SH9750 Bedienungsanleitung

JVC

JVC KD-DV6202 Bedienungsanleitung

JVC

JVC GET0143-001A Bedienungsanleitung

JVC

JVC KD-PDR35 Bedienungsanleitung

JVC

JVC KW NX7000 - Double Din Navigation Bedienungsanleitung

JVC

JVC KD-G120J Leitfaden

JVC

JVC KD-S100 - CD Receiver Bedienungsanleitung

JVC

JVC Pandora KD-A925BT Bedienungsanleitung

JVC

JVC KD-G312 Bedienungsanleitung

JVC

JVC KD-S811R Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung