JVC KD-X40 Bedienungsanleitung

DIGITAL MEDIA RECEIVER / RECEPTOR DE MEDIOS

DIGITALES / RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE

For canceling the display demonstration, see page 4. /

Para cancelar la demostración en pantalla, consulte la página 4. /

Pour annuler la démonstration des affichages, référez-vous à la page 4.

ENGLISH

ESPAÑOL

FRANÇAIS

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

ʷʾˀʾƖʷʷʸ

ƾƿ

KD-X40

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel

séparé.

For Customer Use:

Enter below the

Model No. and Serial

No. which are located

on the top or bottom

of the cabinet. Retain

this information for

future reference.

Model No.

Serial No.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

Caution:

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

In compliance with Federal Regulations, following

are reproductions of labels on, or inside the

product relating to laser product safety.

JVC KENWOOD Corporation

2967-3, ISHIKAWA-MACHI,

HACHIOJI-SHI, TOKYO, JAPAN

THIS PRODUCT COMPLIES WITH DHHS

RULES 21CFR SUBCHAPTER J IN EFFECT AT

DATE OF MANUFACTURE.

Location: Bottom Plate

[European Union only]

2|ޓENGLISH

2011/11/18ޓ22:41:41KD-X40_J_EN

Warning:

Stop the car before operating the unit.

Caution:

Adjust the volume so that you can hear sounds

outside the car. Driving with the volume too high

may cause an accident.

Avoid using the USB device or iPod/iPhone if it

might hinder driving safety.

Caution on volume setting:

Digital devices (USB) produce very little noise

compared with other sources. Lower the volume

before playing these digital sources to avoid

damaging the speakers by the sudden increase of

the output level.

Temperature inside the car:

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

How to reset your unit

Your preset adjustments will

also be erased.

Maintenance

Cleaning the unit

Wipe off the dirt on the panel with a dry silicon or

soft cloth. Failure to observe this precaution may

result in damage to the unit.

Contents

Preparation ............................................................ 4

Canceling the display demonstration

Setting the clock

Basic operations ................................................... 4

Radio ........................................................................ 6

USB ............................................................................ 7

iPod/iPhone ........................................................... 8

External components ...................................... 10

Bluetooth姞.......................................................... 10

Illumination color adjustments .................... 11

Brightness adjustments .................................. 12

Sound adjustments .......................................... 12

Remote controller

............................................... 13

Menu operations ............................................... 14

Additional information ................................... 16

Troubleshooting ................................................ 18

Specifications ..................................................... 19

How to read this manual:

This manual mainly explains operations using

the buttons on the control panel.

< > indicates the displays on the control

panel.

[XX] indicates the initial setting of a menu

item.

ENGLISHޓ|3

2011/11/18ޓ22:41:41KD-X40_J_EN

Canceling the display

demonstration

The display demonstration is always turned on

unless you cancel it.

(Hold)

(Initial setting)

3Select <DEMO OFF>.

4Press MENU to exit.

Setting the clock

(Hold)

2Select <CLOCK>.

3Select <CLOCK SET>.

4Adjust the hour.

5Adjust the minute.

6Press MENU to exit.

Basic operations

Display information

Changes the display information. (Press)

Scrolls the current display information. (Hold)

Source Display

Radio Frequency )Clock

USB Album title/Artist -Track title -Track no./Playing time -Track no./

Clock -(back to the beginning)

iPod/iPhone (HEAD MODE/

IPOD MODE)

iPod/iPhone (EXT MODE) EXT MODE)Clock

iPod/iPhone (Pandora姞

internet radio)

Station name -Album title/Artist -Track title -Playing time -

Clock -(back to the beginning)

External Components (AUX) F-AUX or R-AUX)Clock

Bluetooth Audio BT AUDIO)Clock

Preparation

4|ޓENGLISH

2011/11/18ޓ22:41:41KD-X40_J_EN

Remote controller

USB input terminal

Front AUX input jack

DO NOT expose to bright sunlight.

Remote sensor

Display window

Control dial

Control panel

Aim the remote controller directly at the sensor.

When you press or hold the following button(s)...

Control panel Remote

controller General function

/SOURCE —

Turns on.

Turns off. (Hold)

Press the /SOURCE button on the control panel and turn

the control dial within 2 seconds to select the source.

SOURCE Press repeatedly to select the source.

Control dial

(turn)

VOL - / + Adjusts the volume level.

— Selects items.

Control dial

(press)

)

Mutes the sound or pauses playback.

Press the button again to cancel muting or resume

playback.

— Confirms selection.

iPod —

Switches to iPod source.

Switches the iPod mode when in the iPod source.

('page 8)

EQ SOUND Selects the preset sound mode. ('page 12)

—Returns to the previous menu.

Exits from the menu. (Hold)

/ / Selects a preset station. ('page 6)

Selects MP3/WMA folder. ('page 7)

/ / 

Searches for a station automatically. ('page 6)

Searches for a station manually. (Hold)

Selects track. ('page 7, 8)

Fast-forwards or reverses track. (Hold)

Basic operations

ENGLISHޓ|5

2011/11/18ޓ22:41:41KD-X40_J_EN

Searching for a station

Select <FM> or <AM>.

Auto search. (Press)

Manual search. (Hold)

“M”flashes, then press the button repeatedly.

“ST”lights up when receiving an FM stereo broadcast with sufficient signal strength.

Storing stations in memory

Manual presetting

You can preset up to 18 stations for FM and 6

stations for AM.

While listening to a station...

(Hold)

“PRESET MODE”flashes.

The preset number flashes and “MEMORY”

appears.

2Select preset number.

Auto presetting (FM only)

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

(Hold)

-<TUNER>

-<SSM>

-<SSM 01 – 06>

“SSM”flashes. When all the stations are stored,

“SSM”stops flashing.

To preset <SSM 07 – 12>/<SSM 13 – 18>,

repeat steps 1 and 2.

Selecting a preset station

You can also select a preset station using / .

Setting the Radio Timer

You can tune in to a preset station at a specific

time regardless of the current source.

(Hold)

-<TUNER>

-<RADIO TIMER>

-<OFF>/<ONCE>/

<DAILY>

[OFF] Cancels Radio Timer.

ONCE Activates once.

DAILY Activates daily.

-<FM>/<AM>

-<01>... <18>for FM/

<01>... <06>for AM

3Select the preset station.

4Set the activation time.

5Press MENU to exit.

lights up after the Radio Timer has been set.

Only one timer can be set. Setting a new timer

will override the previous setting.

The Radio Timer will not activate if the unit is

turned off or if <AM>is set to <OFF>after

selecting an AM station for the timer.

Radio

6|ޓENGLISH

2011/11/18ޓ22:41:41KD-X40_J_EN

Playing a USB device

USB 2.0 cable (not supplied)

USB input terminal

The source changes to “USB”and playback starts.

This unit can play MP3/WMA files stored in USB mass storage device (such as a USB memory and

Digital Audio Player).

Make sure all important data has been backed up. We shall bear no responsibility for any loss of data

in USB mass storage class device while using this system.

Selecting a folder/track

Selects folder.

Selects track. (Press)

Fast-forwards or reverses

the track. (Hold)

Selecting a track/folder from

the list

2Select a folder.

If the USB device contains many folders or

tracks, you can fast search for desired folder or

track by turning the control dial quickly.

3Select a track.

Selecting the playback modes

You can select one of the following playback

modes at a time.

(Hold)

#<REPEAT>)<RANDOM>

REPEAT 

RPT OFF Cancels repeat playback.

TRACK RPT Repeats current track.

FOLDER RPT Repeats current folder.

RANDOM 

RND OFF Cancels random playback.

FOLDER RND

Randomly plays all tracks of

current folder, then tracks of

next folders.

ALL RND Randomly plays all tracks.

USB

ENGLISHޓ|7

2011/11/18ޓ22:41:41KD-X40_J_EN

iPod/iPhone

Playing an iPod/iPhone

USB 2.0 cable (accessory of the iPod/iPhone)

USB input terminal

The source changes to “USB”-“USB-IPOD”and playback starts.

Selecting the control mode

#<HEAD MODE>/<IPOD MODE>/

HEAD

MODE

Controls iPod playback through this

unit.

IPOD

MODE

Controls iPod playback from the

iPod/iPhone.

EXT

MODE

Allows any audio signals from iPod/

iPhone.

You can also change the setting using <IPOD

SWITCH>in the menu. ('page 15)

Selecting a track

Applicable under <HEAD MODE/IPOD MODE>

only.

Selects track/chapter.

(Press)

Fast-forwards or reverses

the track. (Hold)

Selecting a track from the list

Applicable under <HEAD MODE>only.

PLAYLISTS)ARTISTS)ALBUMS)SONGS)

PODCASTS)GENRES)COMPOSERS)(back to

the beginning)

2Select the desired list.

Repeat this step until the desired track is selected.

If the selected menu contains many tracks, you

can fast search for the desired track by turning

the control dial quickly.

3Select the desired track.

Selecting the playback modes

Applicable under <HEAD MODE>only.

You can select one of the following playback

modes at a time.

(Hold)

#<REPEAT>)<RANDOM>

REPEAT 

ONE RPT Functions the same as “Repeat

One”of the iPod.

ALL RPT Functions the same as “Repeat

All”of the iPod.

RANDOM 

RND OFF Cancels random playback.

SONG RND Functions the same as “Shuffle

Songs”of the iPod.

ALBUM RND Functions the same as “Shuffle

Albums”of the iPod.

“ALBUM RND”is not applicable for some iPod/

iPhone.

8|ޓENGLISH

2011/11/18ޓ22:41:41KD-X40_J_EN

Pandora姞internet radio

Preparation

1Search for “Pandora” in the Apple iTunes

App Store to find and install the most

current version of the Pandora姞

application onto your device.

2In the application on your device, log in

and create an account with Pandora姞. If

you are not a registered user, an account

can also be created at www.pandora.com.

Pandora姞is only available in the US.

Because Pandora姞is a third-party service, the

specifications are subject to change without

prior notice. Accordingly, compatibility may be

impaired or some or all of the services may

become unavailable.

Some functions of Pandora姞cannot be

operated from this unit.

For issues using the application, please contact

Pandora at [email protected].

Listening to

Pandora姞internet radio

1Open the Pandora姞application on your

device.

2Connect the device to the USB terminal.

The source switches and broadcast starts

automatically from your current station.

Basic Operations

Starts/pauses playback.

Selects thumbs up/thumbs

down.

If thumbs down is selected,

current track is skipped.

Skips track.

Searching the registered station

from the list

BY DATE According to the registration date

A - Z Alphabetical order

2Select the station list display mode.

3Select the desired station.

To bookmark song/artist information

While receiving a song...

(Hold)

“BOOKMARKED”appears and the song/artist

information is stored to the iPod/iPhone.

This unit allows you to bookmark songs and/or

artists in your personalized Pandora姞account.

The bookmarks will not be available for review

on the unit but will be available in your

Pandora姞account.





iPod/iPhone

ENGLISHޓ|9

2011/11/18ޓ22:41:41KD-X40_J_EN

For details, refer also to the instructions supplied with the external components.

Playing an external component from Front/Rear AUX

Portable audio

player, etc.

3.5 mm (1/8") stereo mini plug

(not supplied)

3.5 mm (1/8") stereo mini

plug (with“L”shaped

connector) (not supplied)

1Connect to F-AUX on the control panel

and/or R-AUX on the rear panel.

(Hold)

-<SRC SELECT>

-<F-AUX>/<R-AUX>

-<F-AUX ON>or

<R-AUX ON>

Press MENU to exit.





2Set the source as necessary.

3Select <F-AUX> or <R-AUX>.

4Turn on the connected component and

start playing the source.

Use a 3-terminal plug head stereo mini plug for optimum audio output. Otherwise, sound

may be interrupted or unclear while listening to an external component.

Bluetooth姞

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100

(separately purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of

the unit. ('Installation/Connection Manual)

KS-BTA100 is not available in some countries. Please contact your dealer where you

purchased this unit.

Operations may be different depending on the connected Bluetooth device. For

details, refer also to the instructions supplied with the device.

Preparation

For details on registering and using the Bluetooth device, refer to the instructions manual supplied with

KS-BTA100.

1Register (pair) a Bluetooth device with KS-BTA100.

-<SRC SELECT>

-<R-AUX>

-<BT ADAPTER>

2Change the <SRC SELECT> settings of this unit.

(Hold)

3Press MENU to exit.

KS-BTA100

External components

10 |ޓENGLISH

2011/11/18ޓ22:41:41KD-X40_J_EN

Andere Handbücher für KD-X40

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung