JVC KS-F190 Bedienungsanleitung

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For customer Use:

Enter below the Model No. and

Serial No. which are located on

the top or bottom of the cabinet.

Retain this information for future

reference.

Model No.

Serial No.

GET0107-001A

[J]

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

ENGLISH

ESPAÑOL

FRANÇAIS

KS-F190

CASSETTE RECEIVER

RECEPTOR-REPRODUCTOR DE CASSETTE

RADIOCASSETTE

S.BASS

SEL

DISP

EN00.COVER.KS-F190[J]F16/10/02, 6:03 AM3

ENGLISH

How to reset your unit

Press and hold both the SEL (Select) and (Standby/On/Attenuator) buttons at the same

time for several seconds.

This will reset the built-in microcomputer.

Note:

• Your preset adjustments — such as preset channels or sound adjustments — will also be erased.

SEL (Select)

(Standby/On/Attenuator)

EN02-03-KS-F190[J]F16/10/02, 6:07 AM2

ENGLISH

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit .............................. 2

LOCATION OF THE BUTTONS ........... 4

Control panel ............................................ 4

BASIC OPERATIONS ...................... 5

Turning on the power ............................... 5

RADIO OPERATIONS ..................... 6

Listening to the radio ................................ 6

Storing stations in memory ...................... 7

Tuning in to a preset station ..................... 8

Storing your favorite stations into the

one-touch operation button (EX-extra) .. 9

TAPE OPERATIONS ....................... 10

Listening to a cassette ............................. 10

SOUND ADJUSTMENTS .................. 11

Turning on/off the super bass function ..... 11

Selecting preset sound modes ................. 11

Adjusting the sound ................................. 11

Storing your own sound adjustments ....... 12

OTHER MAIN FUNCTIONS ............... 13

Setting the clock ....................................... 13

Detaching the control panel ..................... 14

MAINTENANCE ............................ 15

TROUBLESHOOTING ..................... 16

SPECIFICATIONS .......................... 17

BEFORE USE

*For safety....

• Do not raise the volume level too much, as this

will block outside sounds, making driving

dangerous.

• Stop the car before performing any complicated

operations.

*Temperature inside the car....

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

EN02-03-KS-F190[J]F24/3/05, 11:59 PM3

ENGLISH

LOCATION OF THE BUTTONS

Control panel

1(Standby/On/Attenuator) button

2+ / – buttons

3S.BASS (Super bass) button

40(Eject) button

5Cassette compartment

61/ ¡(PROG: program) buttons

7EX button

8AM button

9FM button

pDISP (Display) button

qSEL (Select) button

wNumber buttons

eMO (Monaural) button

rSCM (Sound Control Memory) button

t(Control panel release) button

y/ buttons

• Also functions as SSM buttons when

pressed together.

Display window

uBand indicators

FM1, FM2, FM3, AM

iMO(Monaural) indicator,

ST(Stereo) indicator

oS.BASS (Super bass) indicator

;Main display

aSound mode indicators

BEAT, SOFT, POP

pq w ert

1345 678

S.BASS

SEL

DISP

io ;

Display window

EN04-KS-F190[J]F16/10/02, 6:07 AM4

ENGLISH

BASIC OPERATIONS

Adjust the sound as you want

(See pages 11-12).

To drop the volume in a moment

Press briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To turn off the power

Press and hold for more than 1 second.

Note:

When you use this unit for the first time, set the built-

in clock correctly, see page 13.

To increase the volume

To decrease the volume

Turning on the power

Turn on the power.

Notes on One-Touch Operation:

• When you select a source in step 2 below, the

power automatically comes on. You do not

have to press this button to turn on the power.

• If the cassette is already in the cassette

compartment, tape play starts automatically.

However, it is not recommended to leave the

cassette in the compartment when turning off

the power or ignition key. It may damage the

tape head and the cassette.

Select the source.

To operate the tuner (FM or

AM), see pages 6 –9.

To operate the tape,

see page 10.

EX (extra) button: To use

this button, you need to

preset your favorite

station in advance. For

details, see page 9.

Adjust the volume.

Volume level appears

S.BASS

SEL

DISP

13 2

EN05-KS-F190[J]F24/3/05, 9:37 PM5

ENGLISH

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Note:

When a cassette is in the cassette compartment, you

cannot select the tuner. Be sure to eject the cassette

from the cassette compartment to listen to the radio.

Searching a station automatically:

Auto search

Select the band (FM1 – 3, AM).

FM1 FM2

FM3

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Start searching a station.

When a station is received, searching stops.

Selected band appears

To stop searching before a station is received,

press the same button you have pressed for

searching.

Searching a station manually:

Manual search

Select the band (FM1 –3, AM).

FM1 FM2

FM3

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Press and hold or until

“M”(manual) starts flashing on

the display.

To search stations of

higher frequencies

To search stations of

lower frequencies

Selected band appears

S.BASS

SEL

DISP

CONTINUED ON THE NEXT PAGE

EN06-09-KS-F190[J]F 25/10/02, 1:42 PM6

ENGLISH

Tune in to a station you want while “M”

is flashing.

• If you release your finger from the button,

the manual mode will automatically turn off

after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 200 kHz intervals for

FM and 10 kHz for AM) until you release

the button.

When an FM stereo broadcast is hard

to receive:

Press MO (Monaural) while listening to an

FM stereo broadcast.

• Each time you press the button, the MO

indicator lights up and goes off alternately.

When the MO indicator is lit on the display,

the sound you hear becomes monaural but

the reception will be improved.

To restore the stereo effect, press the same

button again.

To tune in to stations of

lower frequencies

To tune in to stations of

higher frequencies

Lights up when receiving an

FM broadcast in stereo.

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band

(FM1, FM2 and FM3).

Select the FM band (FM1 –3) you

want to store FM stations into.

Each time you press the button, the FM

band changes as follows:

Press and hold both buttons for

more than 2 seconds.

“SSM” appears, then disappears when automatic

preset is over.

Local FM stations with the strongest signals

are searched and stored automatically in the

band number you have selected (FM1, FM2 or

FM3). These stations are preset in the number

buttons — No.1 (lowest frequency) to No.6 (highest

frequency).

When automatic preset is over, the station stored

in button number 1 will be automatically tuned into.

FM1 FM2

FM3

EN06-09-KS-F190[J]F16/10/02, 6:14 AM7

ENGLISH

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If you

have not stored them yet, see “Storing stations in

memory” on page 7 and 8.

Select the band (FM1 – 3, AM)

you want.

FM1 FM2

FM3

Select the number (1 –6) for the preset

station you want.

Manual preset

You can preset up to 6 stations in each band (FM1,

FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

Select the band (FM1 –3, AM) you

want to store stations into (in this

example, FM1).

Each time you press the button, the

FM band changes as follows:

Tune in to a station of 88.3 MHz.

Press and hold the number button

(in this example, 1) for more than

2 seconds.

Preset number “P1” flashes for a while.

Repeat the above procedure to

store other stations into other

preset numbers.

Notes:

• A previously preset station is erased when a new station

is stored in the same preset number.

• Preset stations are erased when the power supply to the

memory circuit is interrupted (for example, during battery

replacement). If this occurs, preset the stations again.

To tune in to stations of

higher frequencies

To tune in to stations of

lower frequencies

FM1 FM2

FM3

EN06-09-KS-F190[J]F25/3/05, 1:19 AM8

ENGLISH

Notes:

• A previously preset station is erased when a new

station is stored in the EX button.

• The preset station is erased when the power supply

to the memory circuit is interrupted

(for example, during battery replacement).

If this occurs, preset the station again.

To tune to your favorite station

The unit automatically turns on

(if it has been off).

Your favorite station is turned in –

except when the tape is playing.

• If you press the button again,

the last received station will

be tuned in.

FM1 FM2

FM3

Storing your favorite stations

into the one-touch operation

button (EX-extra)

You can preset an FM or AM station (such as

your favorite station or traffic announcement

station); and recall it by one touch operation even

if the unit is turned off.

Ex.: Storing an FM station of 88.3 MHz into the

one-touch operation button (EX)

Select the band (FM1 –3, AM) you

want to store stations into (in this

example, FM1).

Each time you press the button, the FM

band changes as follows:

Tune in to a station (in this example,

of 88.3 MHz).

Press and hold the button for more

than 2 second.

"P0" flashes on the display, showing that the

station has been preset.

EN06-09-KS-F190[J]F25/3/05, 1:19 AM9

ENGLISH

TAPE OPERATIONS

Listening to a cassette

You can playback type I(normal) tapes.

Turn on the power.

Note on One-Touch Operation:

If a cassette is already in the cassette compartment,

tape play starts automatically. However, it is not

recommended to leave the cassette in the compartment

when turning off the power or ignition key. It may

damage the tape head and the cassette.

Insert a cassette into the cassette

compartment.

When one side of the

tape reaches its end

during play, the other

side of the tape

automatically starts

playing. (Auto Reverse)

Select the tape direction.

Press both buttons at

the same time.

Each time you press both

buttons, the tape direction

changes alternately –

forward ( ) and

reverse ( ).

To stop play and eject the cassette.

Press 0.

Tape play stops and the cassette automatically

ejects from the cassette compartment. The source

changes to the previously selected one.

• You cannot change the source if the cassette is

still in the cassette compartment.

To change source, you must eject the cassette

first.

• You can also eject the cassette by pressing 0

while the unit is turned off.

To fast-wind a tape.

Press in ¡or 1.

The tape will be wound in the direction of the

arrows (¡or 1).

Tape direction

To restart playback, lightly press the other

button which is not pressed in (1or ¡).

S.BASS

SEL

DISP

EN10-KS-F190[J]F16/10/02, 6:16 AM10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

JVC

JVC KD-S100 - CD Receiver Bedienungsanleitung

JVC

JVC KD-S795 Bedienungsanleitung

JVC

JVC KD-AR400 Bedienungsanleitung

JVC

JVC KD-G209 Administratorhandbuch

JVC

JVC 1004DTSMDTJEIN Bedienungsanleitung

JVC

JVC KD-DV5101 Bedienungsanleitung

JVC

JVC KD-A315 Leitfaden

JVC

JVC KWAVX800 - EXAD - DVD Player Bedienungsanleitung

JVC

JVC KS-FX840R Bedienungsanleitung

JVC

JVC KW-AVX848 Bedienungsanleitung

JVC

JVC KW-R515 Bedienungsanleitung

JVC

JVC GET0260-003B Bedienungsanleitung

JVC

JVC KW-XR810 Bedienungsanleitung

JVC

JVC KD-T716BT Bedienungsanleitung

JVC

JVC KW-R900BT Bedienungsanleitung

JVC

JVC KD-G111 Leitfaden

JVC

JVC KD-G322 Leitfaden

JVC

JVC KW-AV61BT Bedienungsanleitung

JVC

JVC KD-G396 Bedienungsanleitung

JVC

JVC KS-FX460R Bedienungsanleitung

JVC

JVC KD-S8R Bedienungsanleitung

JVC

JVC KD-S621 Leitfaden

JVC

JVC KD-LX110R Bedienungsanleitung

JVC

JVC KD-R775S Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung